sport mode TOYOTA GR86 2022 Owners Manual (in English)

862-1. Instrument cluster
Drive mode indicators
Normal mode
TRACK mode
*1: These lights turn on when the engine
switch is turned to ON to indicate
that a system check is being per-
formed. They will turn off after the
engine is started, or after a few sec-
onds. There may be a malfunction in
a system if a light does not come on,
or turn off. Have the vehicle
inspected by any authorized Toyota
retailer or Toyota authorized repairer,
Pre-Collision Braking Sys-
tem OFF indicator*1, 2 (if
equipped) ( P.183)
(white/gre
en)
Conventional Cruise Control
indicator (if equipped)
( P.202, 249)
(white/gre
en)
Adaptive Cruise Control indi-
cator (if equipped) ( P.191)
“READY” indicator (if
equipped) ( P.191)
Lead vehicle indicator (if
equipped) ( P.191)
Lead vehicle indicator*3 (if
equipped) ( P.191)
Your vehicle indicator (if
equipped) ( P.191)
Following distance setting
indicator (if equipped)
( P.191)
Following distance setting
indicator*3 (if equipped)
( P.191)
Lane Departure Warning
OFF indicator*1, 2 (if
equipped) ( P.215)
BSD/RCTA OFF indicator*2
(if equipped) ( P.229)
SRH OFF indicator*2 (if
equipped) ( P.156)
RAB OFF indicator*1, 2 (if
equipped) ( P.241)
(flashes)
Slip indicator*1 ( P.256)
VSC OFF indicator*1, 2
( P.257)
TRC OFF indicator*1, 2
( P.256)
Smart entry & start system
indicator*3 ( P.139)
Hill-start assist control ON
indicator ( P.253)
Security indicator ( P. 7 9 ,
81)
(blue)
Low coolant temperature
indicator*4
Gear Shift indicator ( P.145,
149)
Passenger’s frontal
airbag ON and OFF
indicator*1, 5 ( P. 3 2 )
Low outside temperature
indicator*6 ( P. 8 8 )
Snow mode indicator (if
equipped) ( P.252)
“SPORT” indicator (if
equipped) ( P.252)
Snow mode indicator (if
equipped) ( P.252)
“SPORT” indicator (if
equipped) ( P.252)
“TRACK” indicator
( P.257)
SNOW
SPORT

1444-2. Driving procedures
authorized repairer, or any reliable
repairer.
■When driving with Adaptive Cruise Control or Conventional Cruise
Control activated
Downshifting can be performed even when using Adaptive Cruise Control or
Conventional Cruise Control. After
downshifting, the set speed continues. ( P.145, 146)
■Automatic gear selection when the
vehicle is stopped
When the vehicle is idling at high rpm in order to warm up, and the vehicle is on a
slippery road, the transmission may
automatically shift to 2nd gear for stop- ping and starting off.
■AI-SHIFT
●The AI-SHIFT automatically selects the suitable gear according to driver
performance and driving conditions.
The AI-SHIFT automatically operates when the shift lever is in D. (Shifting
the shift lever to the M position can-
cels the function.)
●G AI-SHIFT automatically selects a
suitable gear for sporty driving accord- ing to driver’s input and driving condi-
tions. G AI-SHIFT operates
automatically when the shift lever is in D and sport mode is selected for the
driving mode. (Selecting normal mode
with the driving mode select switch or shifting the shift lever to the M position
cancels this function.)
■After recharging/reconnecting the
battery
 P.361
While the engine switch is in
ON, move the shift lever with the
brake pedal depressed.
When shifting the shift lever between P
and D, make sure that the vehicle is
completely stopped.
■Shift lock system
The shift lock system is a system to pre-
vent accidental operation of the shift
lever in starting. The shift lever can be shifted from P
only when the engine switch is in ON
and the brake pedal is being depressed.
■If the shift lever cannot be shifted from P
First, check whether the brake pedal is
being depressed.
If the shift lever cannot be shifted with
your foot on the brake pedal, there may
be a problem with the shift lock system. Have the vehicle inspected by your
Toyota dealer immediately.
The following steps may be used as an emergency measure to ensure that the
shift lever can be shifted.
Releasing the shift lock:
1 Set the parking brake.
WA R N I N G
■When driving on slippery road
surfaces
Be careful of downshifting and sud- den acceleration, as this could result
in the vehicle skidding to the side or
spinning.
Shifting the shift lever

1524-2. Driving procedures
■When changing the driving mode
(vehicles with an automatic trans-
mission)
When the driving mode is changed, the
sound of the active sound control will be
stopped for approximately 1 second, this is not a malfunction.
■Customization
Some functions can be customized.
( P.377)
ASC (Active Sound Con-
trol)
The active sound control pro-
vides dynamic engine sounds.
When driving with sport mode*
( P.252) selected, the engine
sounds will be particularly
loud.
*: If equipped

191
4
4-5. EyeSight
Driving
■Setting Adaptive Cruise Con-
trol
1 Setting Adaptive Cruise Control
to standby status
Press the “ON-OFF” switch. At this
time, (white) and the following dis-
tance setting indicator are displayed on the meter display.
The set vehicle speed display will read
“- - - km/h (- - - MPH)”.
Adaptive Cruise Control indica-
tor
Set vehicle speed
Your vehicle indicator
Following distance setting indi-
cator
Following distance setting indi-
cator (icon)
When the multi-information display is set to display content other than the driving
support system inform ation display, the
following distance setting indicator is shown as an icon.
To set the ready status: Adaptive
Cruise Control can be activated
when all of the fo llowing conditions
are met and “READY” indicator is
displayed on the meter display.
• Both the driver's door and the
front passenger's door are
closed.
• The driver’s seatbelt is fastened.
• The shift lever is in the D or M
position.
• The brake pedal is not
depressed.
• EyeSight operation is not tempo-
rarily stopped. (white) is
turned off. ( P.223)
• The road is not a steep slope.
• The steering wheel has not been
turned significantly in either
direction.
• The vehicle speed is between 0
km/h (0 mph) and approximately
180 km/h (110 mph).
• Parking brake is released.
• The GPF system warning light is
not illuminated or flashing.
• The driving mode is set to nor-
mal mode or sport mode.
( P.252)
• Pre-Collision Br aking System is
not turned off during TRACK
mode. ( P.183, 257)
• TRC and VSC system are not
set to off. ( P.257)
How to use Adaptive Cruise
Control
A
C
D

203
4
4-5. EyeSight
Driving
tor
Set vehicle speed
Your vehicle indicator
Following distance setting indi-
cator
Following distance setting indi-
cator (icon)
2 Switch to Conventional Cruise
Control.
Press and hold the (Following dis-
tance setting) switch for approximately
2 seconds or longer to switch from Adaptive Cruise Control to Conven-
tional Cruise Control. A notification
sounds 1 short beep.
At this time, the following distance set-
ting indicator on the meter display turns
off and (white) is displayed.
Conventional Cruise Control
indicator (White)
To set the ready status: Conven-
tional Cruise Control can be acti-
vated when all of the following
conditions are met and “READY”
indicator is displayed on the meter
display.
• Both the driver's door and the
front passenger's door are
closed.
• The driver’s seatbelt is fastened.
• The shift lever is in the D or M
position.
• The brake pedal is not
depressed.
• The road is not on a steep slope.
• The steering wheel has not been
turned significantly in either
direction.
• The vehicle speed is between
approximately 30 km/h (20 mph)
and 200 km/h (125 mph).
• Parking brake is released.
• The GPF system warning light is
not illuminated or flashing.
• The driving mode is set to nor-
mal mode or sport mode.
( P.252)
• Pre-Collision Br aking System is
not turned off during TRACK
mode. ( P.183, 257)
• TRC and VSC system are not
set to off. ( P.257)
When the low fuel level warning
light is illuminated, Conventional
C
D
A

2524-6. Using other driving systems
speed without depressing the
accelerator pedal.
*: If equipped
Press the sport mode switch or snow
mode switch to change between normal
mode and sport mode or snow mode
respectively.
To cancel sport mode or snow mode,
press the same switch again.
1 Normal mode
Provides an optimal balance of fuel
economy, quietness, and dynamic per-
formance. Suitable for normal driving.
2 Sport mode
Use sport mode for sporty driving or
when driving in mountainous regions
with lots of curves.
The “SPORT” indicator comes on.
Also, if the mode is changed to sport
mode while driving with the shift lever in
the D position, the selected gear, from
“D1” to “D6”, will be displayed on the
meter.
3 Snow mode
Driving mode select
switch*
The driving modes can be
selected to suit driving condi-
tion.
Selecting a drive mode

253
4
4-6. Using other driving systems
Driving
Use snow mode for accelerating and
driving on slippery road surfaces such
as snow.
The snow mode indi cator comes on.
■Sport mode
●In sport mode, lower gears are used and gears change at a higher engine
speed.
●In the following situations, it may not
be possible to change to sport mode.
When the mode cannot be changed to sport mode, a buzzer will sound and a
message will be displayed on the
multi-information display. • When the Adaptive Cruise Control or
Conventional Cruise Control is operat-
ing • When the engine is cold
■Snow mode
To prevent slipping, 1st gear cannot be
selected when in snow mode.
■Automatic deactivation of sport mode and snow mode
In the following situations, the driving
mode is automatically deactivated:
●When the engine is turned off after
driving in sport mode or snow mode.
●When the Adaptive Cruise Control or
Conventional Cruise Control is acti-
vated while driving in sport mode.
●When in sport mode and stop-
ping/starting off is automatically per- formed in second gear. ( P.144)
When the engine switch is turned to
ON, the hill-start as sist control ON
indicator will illuminate.
When the hill-start assist control
operates, the indicator will flash.
1 Park your vehicle in a flat, safe
location.
Make sure that the parking brake is
securely engaged.
2 Stop the engine by turning the
engine switch off.
3 Start the engine and check that
the ABS warning light and slip
indicator are off.
Hill-start assist control
Hill-start assist control helps to
maintain braking force to
assist starting off forward
while facing uphill or starting
off backward while facing
downhill.
Hill-start assist control ON
indicator
Disabling hill-start assist
control

257
4
4-6. Using other driving systems
Driving
■“TRACK” mode
Your vehicle is equipped with two types of control modes to accommodate vari-
ous driving preferences. The control
modes can be selected with the “TRACK” switch. Normal mode allows
secure and smooth normal driving.
When the switch is pressed and held for 1 second or more, “TRACK” mode is
activated. When “TRACK” mode is
selected, the control characteristics of VSC, TRC, etc. will be changed and
sportier than normal driving will be pos-
sible.
When “TRACK” mode is selected, the
multi-information display will change to
the “TRACK” mode display and the “TRACK” indicator and VSC OFF indica-
tor will illuminate.
To change back to normal mode while in
“TRACK” mode, press switch or
the “TRACK” switch.
■Turning off both TRC and VSC sys- tem
To turn the TRC and VSC systems off,
press and hold switch for more
than 3 seconds while the vehicle is
stopped.
The TRC OFF indicator and the VSC
OFF indicator will come on.
However, on vehicles with an automatic
transmission, the brake LSD function
will remain on.
Press switch again to turn the sys-
tems back on.
■Selecting TRC mode and VSC mode
Modes can be selected to suit your driving conditions as follows:
Driving condi-
tionsTRC modesVSC modesBrake LSD
functionIndicators
Normal roadsNormal modeNormal modeNormal mode
Rough roadsOFFNormal modeNormal mode
Sport driving
“TRACK” mode“TRACK” mode“TRACK” mode
OFFOFF
“TRACK”
mode*1
OFF*2