air condition TOYOTA GT86 2017 1.G Navigation Manual

3
PAIRING BLUETOOTH® PHONE FOR THE FIRST TIME
(For both Non-Navigation and Navigation Units)
To use the hands-free system, it is necessary to pair a Bluetooth® phone
with the system. Once the phone has been paired, it is possible to use
the hands-free system. This operation cannot be performed while driving.
NOTE: The Bluetooth pairing process for Non-Navigation and Navigation units
differ, as noted below
1. Turn the Bluetooth® connection setting of your cellular phone ON.
a. Pairing is not available when Bluetooth® setting of your phone is
set to OFF.
2. Press the “Phone” button (page 2) to display the “Phone” screen.
Touch “Yes” to register a phone. (Non-Navigation units – skip to step 4)
3. Touch the “Make system discoverable”* button.
4. Next, search for “My Toyota” from your phone’s Bluetooth® screen and
select "My Toyota"
a. To cancel the registration, touch “Cancel”.
(Navigation units – skip to step 7)
* On Android® devices, you will need to make your phone visible to se\
arching devices.
Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.
5. A message will display on the head
unit requesting messaging access.
FOR IPHONE: Using your smartphone,
you may need to allow head unit access
to your messaging and contacts.
Only current iPhone text messages can
be viewed on the head unit. iPhone does
not allow text message reply.

9
CONNECTING A PHONE
In order to use the Aha® audio system, it is necessary to connect an
iPhone® or Android® phone with the Aha® application installed.
CONNECTING AN ANDROID©* PHONE
1. Switch to Aha® mode.
2. Touch “Yes”.
3. Connected Android® device will be
displayed.
• If there are Android® phones in paired device list, touch one to connect it
for Phone and Audio Player.
• The USB/AUX port is located on the instrument panel, or near the shift
knob, etc. The actual design and port position will differ depending on the
vehicle. For details, refer to vehicle “Owner’s Manual”.
CONNECTING AN iPHONE®**
1. Open the cover of the USB/AUX
port and connect an iPhone using an
iPhone cable to the USB port.
2. Open the Aha application on your
phone and select Aha audio source
on the head unit
NOTE: In order to use the Bluetooth® audio system for Aha®, it is necessary
to pair an Android® phone and connect it for Phone and Audio Player. To use
Aha® you must have a data plan for your smartphone (minimum 2GB plan
recommended), access to a Wi-Fi network, or data connectivity through a
portable hotspot device.
NOTE: iPhones must use the USB cable. To use Aha® you must have a data
plan for your smartphone (minimum 2GB plan recommended), access to a
Wi-Fi network, or data connectivity through a portable hotspot device.
NOTE: iPhone® cables are not provided with your vehicle. Please use the
cables that were provided with your phone.
*Android, Google Play, and other marks are trademarks of Google Inc.**iPhone® not included. iPhone and iTunes are registered trademarks of Apple Inc.Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.
CONNECTING FOR Aha®