navigation system TOYOTA GT86 2017 1.G Navigation Manual

2
– use your finger to control selected functions.
– press this button to start the voice command system, press and hold to cancel.
– press to turn radio on/off, turn to adjust volume.
– press this button to access function settings to customize your audio system.a. Language, system volume, Equalizer(EQ) and more can all be adjusted in Settings.
Non-Navigation units – press this button to access the Audio screens to select AM/FM/BT/iPod/USB/Aha Audio.Navigation units – press this button to access the Navigation Map screen, press again while on the Map screen for the Audio screens to selectAM/FM/BT/iPod/USB/Aha Audio.
– press this button to access Bluetooth®* system, register a new phone or access phone contacts.
– these buttons allow you to tune up or down to select radio station or access a desired track.
BUTTON OVERVIEW
* The Bluetooth® word mark and logos are registered trademarks owned \
by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. Other trademarks and trade names are those of th\
eir respective owners. The phones on toyota.com have been tested for Bluetooth® wireless technology compatibility wit\
h Toyota vehicles. Performance will vary based on phone software version, coverage and your wireless carrier.
Be sure to obey traffic regulations and maintain awareness of road and traffic conditions at all times.
MEDIA
TUNE/SEEK
TOUCHSCREENPOWER/VOLUME
VOICE COMMAND
SETTINGS
PHONE

3
PAIRING BLUETOOTH® PHONE FOR THE FIRST TIME
(For both Non-Navigation and Navigation Units)
To use the hands-free system, it is necessary to pair a Bluetooth® phone
with the system. Once the phone has been paired, it is possible to use
the hands-free system. This operation cannot be performed while driving.
NOTE: The Bluetooth pairing process for Non-Navigation and Navigation units
differ, as noted below
1. Turn the Bluetooth® connection setting of your cellular phone ON.
a. Pairing is not available when Bluetooth® setting of your phone is
set to OFF.
2. Press the “Phone” button (page 2) to display the “Phone” screen.
Touch “Yes” to register a phone. (Non-Navigation units – skip to step 4)
3. Touch the “Make system discoverable”* button.
4. Next, search for “My Toyota” from your phone’s Bluetooth® screen and
select "My Toyota"
a. To cancel the registration, touch “Cancel”.
(Navigation units – skip to step 7)
* On Android® devices, you will need to make your phone visible to se\
arching devices.
Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.
5. A message will display on the head
unit requesting messaging access.
FOR IPHONE: Using your smartphone,
you may need to allow head unit access
to your messaging and contacts.
Only current iPhone text messages can
be viewed on the head unit. iPhone does
not allow text message reply.

5
SWITCHING AUDIO SOURCE - NON-NAVIGATION UNITS
1. Press the “MEDIA” button.
• The audio system displays the
current source screen or displays
the source selection screen.
2. On the current source screen,
touch the “Source” or press the
“MEDIA” button to display the audio
source selection screen.
3. Touch a desired audio source.
VOICE TRAINING:
The Non-Navigation unit comes with
a Voice Training feature. Completing
this feature will allow the system to
better recognize your voice/tonality
and can increase the accuracy when
executing your voice commands.
1. Press “Setup” button on your
head unit, then select “Voice”.
2. Select “Train Voice Recognition”,
then “Start”.
3. There will be a total of 10 phrases
to go through. Afterward, the system
will display “Voice recognition
training complete”.
NOTE: Try not to pause when
repeating the phrases because
the system might assume you are
done.
Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.

6
SWITCHING AUDIO SOURCE - NAVIGATION UNITS
1. Press the “MEDIA” button.
• The screen will switch over to the
navigation map.
• Press the “MEDIA” button again.
2. Touch a desired audio source.
SETTING HOME DESTINATION:
1. Press the “MEDIA” button.
2. Select the “Navigation” button.
3. Select “Home”.
4. System will ask if you would like to
set a Home address, select “Yes”.
5. Select the desired options on how
the home destination should be input.
NOTE: We suggest using a location
near your home as your home
destination, rather than your actual
home address.
Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.

7
PRESETTING A STATION
EQUALIZER(EQ)
1. Tune to the desired station.
2. Touch “(add new)”.
• To change the preset station to a
current one, touch and hold the
preset station. Skip steps 3 and 4.
3. Touch “Yes” when the confirmation
screen appears.
4. Touch “OK”.
EQ can be selected by touching the
“Sound” icon.
There are three stored equalizer
curves that you can easily recall at
any time.
Here is a list of the equalizer curves:
POWERFUL is a curve in which
low- and high-pitched sounds are
boosted.
NATURAL is a curve in which low-
and high-pitched sounds are slightly
boosted.
VOCAL is a curve in which the
midrange, which is the human vocal
range, is boosted.
To change settings, press “EQ”
button again.
Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.
(For both Non-Navigation and Navigation Units)
Radio mode has a preset function, which can store up to 18 stations
from any of the AM or FM stations.
EQ is a modified DSP (Digital Signal Processing) system that provides a
customized sound for your vehicle.

8
Aha®
INSTALLING THE Aha® APPLICATION
SWITCHING TO Aha® MODE
Aha® offers more than 100,000 stations of
audio content from Internet music, news,
audiobooks, personalized restaurant
recommendations, weather and hotel
searches, Facebook® and Twitter® newsfeeds
and much more.
1. Download Aha® application onto your smartphone. For an iPhone®, use
iTunes® App Store. For an Android® phone, use Google™ Play.
2. Follow the instructions to set up your Aha® account on your smartphone.
3. Optional: Link your Associated Accounts in the Settings menu to enable
certain personalized stations.
4. Aha® provides content suggestions from a wide range of featured
categories, but you can also add many presets via the smartphone app or the
Aha® website (http://aharadio.com/station).
1. Press the “MEDIA” button.
• The audio system displays the current source screen or displays the
source selection screen.
2. On the current source screen, touch the “Source” or press the “MEDIA”
button to display the audio source selection screen.
3. Touch “aha”*.
• It will take time for the “aha” button to be available during the system
startup.
• If both iPhone® and Android® phone are connected, the iPhone® will be
used for Aha® operation.
• For more information about Aha®, refer to http://www.aharadio.com.
NOTE: Aha® application is available on both touchscreen display audio and
display audio with navigation system.
* Aha, Aha Radio and the Aha and Aha Radio logos are either the trademar\
ks or the registered trademarks of Harman International Industries, Incorporated. Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.
INFORMATION
INFORMATION