lock TOYOTA GT86 2020 (in English) User Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2020, Model line: GT86, Model: TOYOTA GT86 2020Pages: 32, PDF Size: 8.34 MB
Page 26 of 32

24
Seat belts
Tire Pressure Monitoring (warning) System (TPMS)
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly, 
the Automatic Locking Retractor (ALR) will prevent it from being re-extended 
beyond that point, unless fully retracted again. This feature is used to help 
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint 
system, refer to the Owner’s Manual.
Keep as low onhips as possible
Take up slack
Too high
If tire pressure becomes critically low on any of the tires (excluding \
the spare), 
“” indicator will illuminate. Correctly adjusting tire inflation will \
turn off the light 
after a few minutes. If the light does not turn off, have the system che\
cked by your 
Toyota dealer. 
If the tire pressure indicator flashes for more than 60 seconds and then\
 remains on, 
take the vehicle to your local Toyota dealer. 
Refer to the Owner’s Manual for more details.
SAFETY & EMERGENCY FEATURES
Trunk-Internal release
Pull up 
Page 28 of 32

26
SAFETY & EMERGENCY FEATURES
Star Safety System™
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-
lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force\
 Distribution 
(EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Ve\
hicle Stability 
Control (VSC).
Refer to the Owner’s Manual for more details and important informatio\
n on 
limitations to these systems.
Smart Stop Technology automatically reduces engine power when the accele\
rator 
and brake pedals are pressed simultaneously under certain conditions. 
SST engages when the accelerator is depressed first and the brakes are a\
pplied 
firmly for longer than one-half second at speeds greater than five miles\
 per hour.  
SST doesn’t engage if the brake pedal is depressed before the acceler\
ator pedal, 
allowing vehicles to start on a steep hill and safely accelerate without\
 rolling 
backward.
SMART STOP TECHNOLOGY (SST)
VSC helps prevent loss of traction during cornering by reducing engine p\
ower and 
applying brake force to selected wheels. 
Toyota’s VSC monitors steering angle and the direction your vehicle i\
s traveling. 
When it senses that the front or rear wheels begin to lose traction, VSC\
 reduces 
engine power and applies braking to selected wheels. This helps restore \
traction 
and vehicle control.
VEHICLE STABILITY CONTROL (VSC)
Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup 
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure 
repeatedly for fractions of a second. This helps the tires attain the tr\
action that 
current road conditions will allow, helping you to stay in directional c\
ontrol. 
ANTI-LOCK BRAKE SYSTEM (ABS)
Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking 
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split 
second to react, Brake Assist can add additional brake pressure more qui\
ckly than 
just the driver alone can.
BRAKE ASSIST (BA)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD\
) to help 
maintain control and balance when braking. EBD responds to sudden stops \
by 
redistributing brake force to enhance the braking effectiveness of all f\
our wheels.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)