13
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Power Liftgate (back door) (if equipped)
PushPush and hold
Instrument panel
Open and close
Open: Push and hold
Close: Push and hold again
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Refer to the Owner’s Manual for more details.
Open only
Remote
control
(without
Smartkey)
Remote
control
(with
Smartkey)
1. When the liftgate reaches the desired height, push the rear liftgate close-button (on the
door jam of the liftgate) once. Press and hold the button until the buzzer sounds.
2. To reset the height, with the liftgate open and not moving, press and hold the rear liftgate
close-button until it buzzes, and continue to hold until it buzzes again -then let go. Push
the same button to close the liftgate. When you next open the liftgate it will open to the
maximum height.
3. The height can also be set through the “Setup” screen on the audio display. Setup >
Vehicle Customization > Other Vehicle Settings > Power Back Door Opening Adjust.
Through this screen, there are 5 height options to choose from.
NOTE: If the liftgate has stopped operating, check inside the glove box, on the left side, to
ensure the PWR DOOR OFF button has not been pushed.
For detailed instructions, see Owner’s Manual.
PROGRAMMABLE POWER LIFTGATE
