tire pressure reset TOYOTA HIGHLANDER 2021 Owners Manual (in English)

58
SAFETY AND EMERGENCY FEATURES
Unlock
Lock
Rear door child safety locks
Tire Pressure Monitoring (warning) System (TPMS)
Moving the lever downward will allow the door to be opened only from the outside.
Rear door
“Setting Tire Pressure Warning System” will be displayed on the Multi-Information
Display (MID) and the tire pressure warning light will blink 3 times.
When the message disappears, initialization is complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for approximately 1 minute and then remains
on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
Park the vehicle in a safe place and turn the vehicle off. (Initialization cannot be
performed while the vehicle is moving.) Adjust the tire inflation pressure to the
specified cold tire inflation pressure level then turn the vehicle to ON.
System reset initialization
(1) Press “” or “” switches and select “” from the Multi-Information
Display (MID).
(2) Press “” or “” switches and select “” and then press and hold “.”
(3) Select “TPWS” and then push “.”
(4) Select “Set Pressure” and then push and hold “.”
Vehicles equipped with 4.2-in displayVehicles equipped with 7-in display
130494_MY21_Highlander_QRG_V7_ML_070821_PRINT_R1.indd 587/9/21 6:47 AM