display TOYOTA HIGHLANDER HYBRID 2021 (in English) Owner's Manual

40
FEATURES & OPERATIONSBlind Spot Monitor (BSM) and
Rear Cross Traffic Alert (RCTA)
Buzzer*
Outside rear view mirror indicators
The system is designed to use radar sensors to detect vehicles traveling\� in the
Highlander HV’s blind spot when changing lanes. If a vehicle is detec\�ted, the driver
will be alerted via the outside rear view side mirror indicators.
While in reverse, when a vehicle approaching from the right or left rear\� of the
Highlander HV is detected, the outside rear view mirror indicators will \�flash. Also,
the RCTA icon for the detected side will be displayed on the audio syste\�m display,
and the RCTA buzzer will sound.
BLIND SPOT MONITOR (BSM)
REAR CROSS TRAFFIC ALERT (RCTA)
(1) Press “” or “” switches and select “” from the Multi-Information Display
(MID).
(2) Press “
” or “” switches and select “” or “” then press “.” The
setting screen is displayed.
(3) Press “
” or “” switches and select the “On/Off” setting function and then
press “
.”
(4) Press “
” to go back to the menu.
Refer to the Owner’s Manual for limitations and more details on this \�system before
attempting to use it.
SYSTEM ON/OFF
Audio system screen*
* RCTA only
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 40130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 407/9/21 2:41 AM7/9/21 2:41 AM

41
Display mode switching button Body color setting switchBody color setting switch
Display mode switching button
Rotation pause switch
Rotation pause switch
The Bird’s Eye View Camera with Perimeter Scan function assists the d\�river in
viewing the surroundings, when operating at low speeds or parking, by co\�mbining
front, side and rear cameras and displaying an overhead image on the Aud\�io
Multimedia System screen.
To display the moving view/see-through view screen, press the camera swi\�tch when
the shift lever is in the “P” position and the Intuitive parking a\�ssist is enabled.

For limitations and more details, refer to the “Navigation and Multim\�edia System
Owner’s Manual.”
Moving viewSee-through view
Bird’s Eye View Camera
with Perimeter Scan
(if equipped)
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 41130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 417/9/21 2:41 AM7/9/21 2:41 AM

42
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 2.5+ (TSS 2.5+) is a set of active safety technologies
designed to help mitigate or prevent collisions across a wide range of t\�raffic
situations, in certain conditions. TSS 2.5+ is designed to help support \�the driver’s
awareness, decision making and vehicle operation contributing to a safe \�driving
experience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense.
Quick overview-Toyota Safety Sense™ 2.5+
Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced grille-mounted radar system is designed to work with
the forward-facing camera to help recognize a preceding pedestrian or
bicyclist, and provide an alert, mitigation and/or avoidance support in \�
certain conditions.
Lane Departure Alert with Steering Assist
Lane Departure Alert with Steering Assist is designed to provide
notification when the system detects an unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help\�
keep the vehicle in its lane.
The Sway Warning function is designed to detect vehicle swaying
(based on the vehicle location and steering wheel operation) and alert\�
drivers with an audio and visual alert, urging them to take a break.
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and
the tail lights of preceding vehicles and switch between high beams
and low beams as appropriate.
Road Sign Assist (RSA)
RSA is designed to recognize specific road signs using the forward-
facing camera to provide information to the driver via the display.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
Full-Speed Range DRCC is designed to help maintain a pre-set
distance to a preceding vehicle when the preceding vehicle is traveling \�
at a lower speed. The minimum set speed is approximately 20 MPH, but
once activated, the operating speed range is 0-110 MPH.
Lane Tracing Assist (LTA) System
LTA contains all the features of Lane Departure Alert with Steering
Assist described below and additionally is designed to help keep the
vehicle in the center of a lane by assisting the driver in steering cont\�rol
when using Full-Speed Range DRCC.
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 42130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 427/9/21 2:41 AM7/9/21 2:41 AM

44
TOYOTA SAFETY SENSE™
PRE-COLLISION SYSTEM (CONTINUED)
Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\�s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\�nformation
Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\�tional
braking force using Brake Assist. This system may prime the brakes and m\�ay apply
greater braking force in relation to how strongly the brake pedal is dep\�ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\�t the
possibility of a frontal collision with a preceding vehicle is extremely\� high, the
system may automatically apply the brakes, reducing speed in order to he\�lp the
driver reduce the impact and in certain cases avoid the collision.
Refer to the Toyota Owner’s Manual for additional information on PCS \�operation,
settings adjustments, limitations, and precautions before attempting to \�use it.
Monocular camera sensorMillimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\�irst provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and inf\�ormation.Under certain conditions, the PCS system included with the TSS 2.5+ pack\�age
may also help to detect a pedestrian or bicyclist in front of your vehic\�le using the
forward-facing camera and front grille-mounted radar. The forward-facing\� camera
of PCS detects a potential pedestrian or bicyclist based on size, profil\�e, and motion
of the detected pedestrian or bicyclist. However, a pedestrian or bicycl\�ist may not
be detected depending on the conditions, including the surrounding brigh\�tness
and the motion, posture, size, and angle of the potential detected pedes\�trian or
bicyclist, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 44130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 447/9/21 2:41 AM7/9/21 2:41 AM

45
CHANGING PRE-COLLISION ALERT TIMING
DISABLING PRE-COLLISION SYSTEM (PCS)
FarMiddle
(default) NearOVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
(1) Press “” or “” switches and select “” from the Multi-Information Display
(MID).
(2) Press “
” or “” switches and select “ PCS” and then press “.” The
setting screen is displayed.
(3) Press “
” or “” switches and select “Sensitivity” and then press and hold
“
” to select the desired setting. Each time it is pressed, the respons\�e to the
PCS warning timing changes as shown above.
(4) Press “
” to go back to the menu.
Note: PCS is enabled each time the vehicle is turned on. The system can be
disabled/enabled and the alert timing of the system can be changed. (Alert
timing only, brake operation remains the same.)
(1) Press “
” or “” switches and select “” from the Multi-Information Display
(MID).
(2) Press “
” or “” switches and select “ PCS” and then press “.” The
setting screen is displayed.
(3) Press “
” or “” switches and select “PCS on/off” and then press “” to
select the desired setting.
(4) Press “
” to go back to the menu.
Note: The system is enabled each time the vehicle is turned on.
Refer to the Toyota Owner’s Manual for additional information on PCS \�operation,
settings adjustments, limitations, and precautions before attempting to \�use it.
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 45130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 457/9/21 2:41 AM7/9/21 2:41 AM

47
LANE DEPARTURE ALERT
LTA system display
The LTA indicator is illuminated when Lane Departure Alert is active. Th\�e LTA
indicator and lane markers flash orange when operating.
Operation display
of steering wheel
operation support LTA indicator
Lane markers/road edge
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
By detecting visible white/yellow lane markings or the road’s edge at\� speeds above
32 mph, Lane Departure Alert with Steering Assist is designed to issue a\�n audio/
visual alert if an inadvertent lane departure is detected. If the driver\� does not
take corrective action, the Steering Assist function is designed to prov\�ide gentle
corrective steering.*
* See toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situation\�s in which the
system operation may be limited.
Lane Departure Alert with Steering Assist
Press and hold the LTA switch
to deactivate Lane Departure
Alert with Steering Assist.
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 47130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 477/9/21 2:41 AM7/9/21 2:41 AM

48
TOYOTA SAFETY SENSE™
(2)
(1)
The LTA system displays when the Multi-Information Display (MID) is switched
to the driving assist system information screen.
(1) The system displays solid white lines on the Lane Departure Alert \�indicator when visible lane markers or the road are detected. A side flashes orange to \�alert the
driver when the vehicle deviates from its lane.
(2) The system displays outlines on the Lane Departure Alert indicator\� when lane markers or the road are not detected or the function is temporarily canc\�eled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met
again, operation of the function is automatically restored. For example, Lane
Departure Alert may not function on the side(s) where white/yellow lines are
not detectable.
ADJUSTING LANE DEPARTURE ALERT SENSITIVITY
The driver can adjust the sensitivity of the Lane Departure Alert functi\�on from the
Multi-Information Display (MID) customization screen. High - Is designed to warn approximately before the front
tire crosses the lane marker.
Standard - Is designed to warn approximately when the front
tire crosses the lane marker.
(1) Press “
” or “” switches and select “” from the Multi-Information Display
(MID).
(2) Press “
” or “” switches and select “” and then press “.” The setting
screen is displayed.
(3) Press “
” or “” switches and select “Sensitivity” and then press “” to
select the desired setting.
(4) Press “
” to go back to the menu.
LANE DEPARTURE ALERT (CONTINUED)
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 48130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 487/9/21 2:41 AM7/9/21 2:41 AM

49
SWAY WARNING SYSTEM
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LTA SWAY WARNING ALERT
SWS is a function of LTA and is designed to detect swaying based on the \�vehicle
location in the lane and the driver’s steering wheel operation. To he\�lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\� display in
the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
(1) Press “” or “” switches and select “” from the Multi-Information Display
(MID).
(2) Press “
” or “” switches and select “” and then press “.” The setting
screen is displayed.
(3) Press “
” or “” switches and select “Sway Sensitivity” and then press “”
to select the desired setting.
(4) Press “
” to go back to the menu.
Refer to the Toyota Owner’s Manual for additional information on LTA \�operation,
settings adjustments, limitations, and precautions before attempting to \�use it. (1) Press “
” or “” switches and select “” from the Multi-Information Display
(MID).
(2) Press “
” or “” switches and select “” and then press “.” The setting
screen is displayed.
(3) Press “
” or “” switches and select “Sway Warning” and then press “”
to select the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 49130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 497/9/21 2:41 AM7/9/21 2:41 AM

50
Operation display
of steering wheel
operation supportLTA indicator
Lane markers
TOYOTA SAFETY SENSE™
LANE TRACING ASSIST w/LANE CENTERING
LTA system display
Follow-up
cruising display
When Full-Speed Range Dynamic Radar Cruise Control (DRCC) is enabled a\�nd
lane markers are detectable, Lane Tracing Assist (LTA) uses the lines \�on the road
and/or preceding vehicles to help keep the vehicle centered in its lane.\�
See toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situation\�s in which the
system operation may be limited.
Lane Tracing Assist (LTA) with Lane
Centering
Press and hold the LTA switch
to deactivate Lane Tracing
Assist.
The lane centering function is linked with Full-Speed Range Dynamic Rada\�r Cruise
Control (DRCC) and provides the required assistance by operating the s\�teering
wheel to keep the vehicle in its current lane.
When dynamic radar cruise control with full-speed range is not operating\�, the lane
centering function does not operate.
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 50130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 507/9/21 2:42 AM7/9/21 2:42 AM

51
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
DISABLING LANE CENTERING FUNCTION
(1) Press “” or “” switches and select “” from the Multi-Information Display
(MID).
(2) Press “
” or “” switches and select “” and then press “.” The setting
screen is displayed.
(3) Press “
” or “” switches and select “Lane center” and then press “” to
select the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LTA \�operation,
settings adjustments, limitations, and precautions before attempting to \�use it.
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 51130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 517/9/21 2:42 AM7/9/21 2:42 AM