TOYOTA HIGHLANDER HYBRID 2022 Owners Manual

5318-2. Customization
8
Vehicle specifications
*1: For details about each function: P.99, 110
*2: The default setting varies according to country.
*3: 4.2-inch display
*4: AWD models
*5: 7-inch display
*6: Selecting this item will only change the gadget.
*7: Selecting this item will turn the display of the gadget off.
■Head-up Display*(P.112)
*: If equipped
Rear seat reminder
functionOnOff—O—
Suggestion functionOn
On (when the vehi-
cle is stopped)
O—O
Off
FunctionDefault settingCustomized setting
Head-up displayOnOff—O—
Gauge informationHybrid Sys-
tem IndicatorTachometer—O—No content
Route guidance to desti-
nation/street nameOnOff—O—
Driving support system
displayOnOff—O—
CompassOnOff—O—
Audio system operation
statusOnOff—O—
Function*1Default settingCustomized setting

5328-2. Customization
■Door lock (P.131, 495)
■Smart key system and wireless remote control ( P.131, 146)
■Smart key system ( P.131, 146)
FunctionDefault settingCustomized setting
Unlocking using a
mechanical key
Driver’s door
unlocked in
one step, all doors
unlocked in two step
All doors unlocked in one step——O
Automatic door locking
function
Shift position linked door
locking opera- tionOff
O—OSpeed linked door locking operation
Automatic door unlock-
ing function
Shift position linked door unlocking operationOff
O—ODriver’s door linked door unlocking operation
FunctionDefault settingCustomized setting
Operation buzzer vol-
ume5OffO—O1 to 7
Operation signal (emer-
gency flashers)OnOffO—O
Time elapsed before
automatic door lock
function is activated if
door is not opened after
being unlocked
60 seconds
Off
O—O30 seconds
120 seconds
Open door reminder
buzzer (when locking
the vehicle)
OnOff——O
FunctionDefault settingCustomized setting
Smart key systemOnOff——O
Smart door unlockingDriver’s doorAll the doorsO—O

5338-2. Customization
8
Vehicle specifications
*: This setting can be changed when the smart door unlocking setting is set
to driver’s door.
■Wireless remote control ( P.129, 131, 135)
■Power back door (P.135)
Number of consecutive
door lock operations2 timesAs many as
desired——O
Time elapsed before
unlocking all the door
when gripping and hold-
ing the driver’s door
handle
*
2 seconds
Off
——O1.5 seconds
2.5 seconds
FunctionDefault settingCustomized setting
Wireless remote controlOnOff——O
Unlocking operation
Driver’s door unlocked in
one step, all doors
unlocked in two step
All doors unlocked in one stepO—O
Theft deterrent panic
modeOnOff——O
Locking operation when
door openedOnOffO—O
FunctionDefault settingCustomized setting
Power back doorOnOff—O—
Kick sensor*1OnOff—O—
Power back door open-
ing position5
1 to 4
—O—
User setting*2
Buzzer volumeLevel 3Level 1—O—Level 2
FunctionDefault settingCustomized setting

5348-2. Customization
*1: If equipped
*2: The open position is set by the power back door switch. ( P.99, 109)
*3: The operation buzzer that sounds when the back door begins to operate
cannot be turned off.
■Driving position memory* (  P.159)
*: If equipped
■Power windows and moon roof* ( P.179, 182)
Opening/closing of the
back door using the
power back door switch
on the instrument panel
Press and holdOne short press——O
Opening/closing of the
power back door using
the switch of the
wireless remo te control
Press and hold
One short press
——OPush twice
Off
Operation buzzer while
the back door is operat-
ing
*3OffOn——O
Power back door open
operation when the back
door opener switch is
pressed
OnOff——O
FunctionDefault settingCustomized setting
Selecting doors linked to
the memory recall func-
tion
Driver’s doorAll doors——O
FunctionDefault settingCustomized setting
Mechanical key linked
operationOffOn——O
FunctionDefault settingCustomized setting

5358-2. Customization
8
Vehicle specifications
*: If equipped
■Moon roof* ( P.182)
*: If equipped
■Automatic light control system ( P.229)
■Lights ( P.229)
Wireless remote control
linked operationOffOn (open only)——O
Wireless remote control
linked operation signal
(buzzer)
OnOff——O
FunctionDefault settingCustomized setting
Linked operation of com-
ponents when mechani-
cal key is u sed (open
only)
Slide onlyTilt only——O
Linked operation of com-
ponents when wireless
remote control is used
Slide onlyTilt only——O
FunctionDefault settingCustomized setting
Light sensor sensitivityStandard-2 to 2O—O
Time elapsed before
headlights automatically
turn off after doors are
closed
30 seconds
Off
O—O60 seconds
90 seconds
Windshield wiper linked
headlight illuminationOnOff——O
FunctionDefault settingCustomized setting
Daytime running lightsOnOff*1O—O
Welcome lightingOnOff——O
AFS (Adaptive
Front-lighting System)
*2OnOff——O
FunctionDefault settingCustomized setting

5368-2. Customization
*1: Except for Canada
*2: If equipped
■Rear window wiper (P.238)
■PCS (Pre-Collision System) ( P.249)
■LTA (Lane Tracing Assist) (P.260)
■RSA (Road Sign Assist)* ( P.283)
FunctionDefault settingCustomized setting
Back door opening
linked rear window wiper
stop function
OffOn——O
Washer linked rear win-
dow wiper operationOnOff——O
Shift position linked rear
window wiper operation
( P.239)
Only once
Off
——OContinuous
FunctionDefault settingCustomized setting
PCS (Pre-Collision Sys-
tem)OnOff—O—
Adjust alert timingMiddleEarly—O—Late
FunctionCustomized setting
Lane centering functionOn, Off—O—
Alert sensitivityHigh, Standard—O—
Vehicle sway warning
functionOn, Off—O—
Vehicle sway warning
sensitivityHigh, Standard, Low—O—
FunctionDefault settingCustomized setting
RSA (Road Sign Assist)OnOff—O—
Excess speed notifica-
tion methodDisplay onlyNo notification—O—Display and buzzer

5378-2. Customization
8
Vehicle specifications
*: If equipped
■Dynamic radar cruise control with full-speed range (P.271)
■BSM (Blind Spot Monitor) ( P.286)
■Intuitive parking assist* ( P.292)
*: If equipped
Excess speed notifica-
tion level1 mph (2 km/h)3 mph (5 km/h)—O—5 mph (10 km/h)
Other notifications
method (no-entry notifi-
cation)
Display only
No notification
—O—Display and buzzer
FunctionDefault settingCustomized setting
Curve speed reduction
function strengthHighLow—O—Off
FunctionDefault settingCustomized setting
BSM (Blind Spot Moni-
tor)OnOff—O—
Outside rear view mirror
indicator brightnessBrightDim—O—
Alert timing for pres-
ence of approaching
vehicle (sensitivity)
Intermediate
Early
—O—
Late
Only when vehicle
detected in blind spot
FunctionDefault settingCustomized setting
Intuitive parking assistOnOff—O—
Buzzer volumeLevel 2Level 1—O—Level 3
FunctionDefault settingCustomized setting

5388-2. Customization
■RCTA (Rear Cross Traffic Alert) function (P.301)
■PKSB (Parking Support Brake)* ( P.308)
*: If equipped
■Front automatic air conditioning system ( P.340)
■Illumination ( P.360)
FunctionDefault settingCustomized setting
RCTA (Rear Cross Traf-
fic Alert) functionOnOff—O—
Buzzer volumeLevel 2Level 1—O—Level 3
FunctionDefault settingCustomized setting
PKSB (Parking Support
Brake) functionOnOff—O—
FunctionDefault settingCustomized setting
A/C auto switch opera-
tionOnOffO—O
FunctionDefault settingCustomized setting
Time elapsed before the
interior lights turn off15 seconds
Off
O—O7.5 seconds
30 seconds
Operation after the
power switch is turned
off
OnOff——O
Operation when the
doors are unlockedOnOff——O
Operation when you
approach the vehicle
with the electronic key
on your person
OnOff——O

5398-2. Customization
8
Vehicle specifications
*: If equipped
■Vehicle customization
●When the smart key system is off,
smart door unlocking cannot be
customized.
●When the doors remain closed
after unlocking the doors and the
timer activated automatic door
lock function activates, signals will
be generated in accordance with
the operation buzzer volume and
operational signal (emergency
flashers) function settings.
Instrument panel orna-
ment light
* and door trim
ornament lights
*
OnOff——O
Time elapsed before the
outer foot lights
* turn off15 seconds
Off
O—O7.5 seconds
30 seconds
Operation of the outer
foot lights
* when you
approach the vehicle
with the electronic key
on your person
OnOff——O
Operation of the outer
foot lights
* when the
doors are unlocked with
the power door lock
switch
OnOff——O
FunctionDefault settingCustomized setting

5408-3. Initialization
8-3.Initialization
*: If equipped
Items to initialize
The following items must be initialized for normal system
operation after such cases as the 12-volt battery being recon-
nected, or maintenance being performed on the vehicle:
List of items to initialize
ItemWhen to initializeReference
Power back door• After reconnecting or changing the 12-volt batteryP. 1 4 2
Intuitive parking
assist
*• After reconnecting or changing the 12-volt batteryP. 2 9 5
PKSB (Parking
Support Brake)
*• After reconnecting or changing the 12-volt batteryP. 3 1 4
Message indicat-
ing maintenance is
required (U.S.A.
only)
• After the maintenance is per-formedP. 4 0 5
Tire pressure warn-
ing system
• When the tire inflation pressure is changed such as when
changing traveling speed
• When the tire inflation pressure is changed such as when the
tire size is changed
• When rotating the tires
• After registering the ID codes
P. 4 2 8