TOYOTA LAND CRUISER 1996 J80 Workshop Manual

TOYOTA LAND CRUISER 1996 J80 Workshop Manual LAND CRUISER 1996 J80 TOYOTA TOYOTA https://www.carmanualsonline.info/img/14/6860/w960_6860-0.png TOYOTA LAND CRUISER 1996 J80 Workshop Manual
Trending: trailer, radio, height, heating, Engine heaters, head light, radiator cap

Page 831 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual EM3322
EM−46
−
ENGINE MECHANICAL CYLINDER HEAD
1996 LAND  CRUISER   (RM451U)
(e) Inspect the gear spring
Using vernier calipers, measure the free distance be-
tween the spring ends.
Free distance:

Page 832 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual EM2196
−
ENGINE MECHANICAL CYLINDER HEAD
EM−47
1996 LAND CRUISER   (RM451U)
(h) Inspect the gear backlash.
(1) Install the camshafts without installing the exhaustcam sub−gear (See page  EM−54

Page 833 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual P22604
EM−48
−
ENGINE MECHANICAL CYLINDER HEAD
1996 LAND  CRUISER   (RM451U)
12. INSPECT INTAKE MANIFOLD
Using a precision straight edge and thickness gauge, measure
the surface contacting the cyl

Page 834 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual EM1Q6−01
Both intake and exhaust
Bushing bore diametermm (in.)Bushing 
size
11.492 −  11.513
(0.4524 −  0.4533)
11.542 −  11.563
(0.4544 −  0.4552) Use STD
Use O/S 0.05
−
ENGINE MECHANICAL

Page 835 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual EM−50
−
ENGINE MECHANICAL CYLINDER HEAD
1996 LAND  CRUISER   (RM451U)
2. REPLACE SPARK PLUG TUBE GASKETS
(a) Using a screwdriver, pry out the tube gasket.
(b) Using SST and a hammer, tap in a new

Page 836 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual EM1E6−01
−
ENGINE MECHANICAL CYLINDER HEAD
EM−51
1996 LAND CRUISER   (RM451U)
REASSEMBLY
HINT:
Thoroughly  clean all parts to be assembled.
Before installing the parts, apply new engine oil to

Page 837 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual EM−52
−
ENGINE MECHANICAL CYLINDER HEAD
1996 LAND  CRUISER   (RM451U)
(b) Install the TVV.
3. INSTALL ECT SENDER GAUGE
4. INSTALL ECT CUT SWITCH
5. INSTALL ECT SENSOR
6. INSTALL VALVES
(a) Using S

Page 838 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual −
ENGINE MECHANICAL CYLINDER HEAD
EM−53
1996 LAND CRUISER   (RM451U)
(d) Using a plastic−faced hammer, lightly tap the valve stem
tip to ensure a proper fit.
7. INSTALL VALVE LIFTERS AND SHIMS
(

Page 839 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual EM1E7−01
EM−54
−
ENGINE MECHANICAL CYLINDER HEAD
1996 LAND CRUISER   (RM451U)
INSTALLATION
1. INSTALL CYLINDER HEAD AND INTAKE MANIFOLD ASSEMBLY
(a) Place the cylinder head on the cylinder head.

Page 840 of 1399

TOYOTA LAND CRUISER 1996 J80 Workshop Manual −
ENGINE MECHANICAL CYLINDER HEAD
EM−55
1996 LAND CRUISER   (RM451U)
(7) Install and torque the 2 mounting bolts.
Torque: 21N·m (210 kgf·cm, 15 ft·lbf)
2. ASSEMBLE EXHAUST CAMSHAFT
(a) Mount th
Trending: tail lights, coolant capacity, Pinion depth, bumper, tire type, Steering connecting rod, transmission fluid