sensor TOYOTA LAND CRUISER 1998 Factory Repair Manual

LU08P-07
B04470
B04791
RH No.3 Timing Belt Cover
LH No.3 Timing Belt CoverNo.2 Timing Belt Cover
Camshaft Position
Sensor Connector
Engine Wire
Drive Belt Idler PulleyTiming Belt
Fan Bracket
N´m (kgf´cm, ft´lbf) : Specified torqueOil Cooler Pipe
Timing Belt Tensioner Dust Boot
Cover Plate
39 (400,29)
245 (2,500, 181)
32 (330, 24)
16 (160, 12)
7.5 (80, 66 in.´lbf)
16 (160, 12)
Water Bypass
Hose
LU-4
- LUBRICATIONOIL PUMP
1785 Author
: Date
:
2004 LAND CRUISER (RM1071U)
OIL PUMP
COMPONENTS

B04472
GeneratorDrive Belt Tensioner
No.1 Timing Belt Cover
Crankshaft Pulley
Timing Belt
Timing Belt Guide
(Crankshaft Angle Sensor Plate)No.1 Idler Pulley
Crankshaft Timing PulleyPlate Washer
No.2 Idler Pulley
Timing Belt Cover SpacerGasket

Precoated part
N´m (kgf´cm, ft´lbf) : Specified torque
39 (400, 29)
34.5 (350, 25)

34.5 (350, 25)
- LUBRICATIONOIL PUMP
LU-5
1786 Author
: Date
:
2004 LAND CRUISER (RM1071U)

B04485
Oil Pump
Crankshaft Position
Sensor Connector Crankshaft
Position Sensor
Oil Filter, Oil Cooler and
Filter Bracket AssemblyOil Cooler HoseClamp
Oil StrainerOil Dipstick
Guide and
Dipstick  O-Ring
 Gasket
No.1 Oil Pan
No.2 Oil Pan Oil Pan Baffle PlateClamp
 Gasket
Drain Plugx 20
N´m (kgf´cm, ft´lbf) : Specified torque
 Non-reusable part Gasket
30.5 (310, 22)
15.5 (160, 11)
 O-Ring
15.5 (160, 11)
x 4
x 8
28 (290, 21)
7.5 (80, 66 in.´lbf)
7.5 (80, 66 in.´lbf)
7.5 (80, 66 in.´lbf)
7.5 (80, 66 in.´lbf)
39 (400, 29)
7.5 (80, 66 in.´lbf)
18 (185,13)
15 (153,11)
LU-6
- LUBRICATIONOIL PUMP
1787 Author
: Date
:
2004 LAND CRUISER (RM1071U)

B04486
Push New O-Ring
LU-18
- LUBRICATIONOIL PUMP
1799 Author
: Date
:
2004 LAND CRUISER (RM1071U)

Parts must be assembled within 5 minutes of ap-
plication. Otherwise the material must be removed
and reapplied.

Immediately remove nozzle from the tube and rein-
stall cap.
(c) Install the No.2 oil pan with the 20 bolts and 2 nuts. Uni-
formly tighten the bolts and nuts in several passes.
Torque: 7.5 N´m (80 kgf´cm, 66 in.´lbf)
HINT:
Use bolts 14 mm (0.55 in.) in length.
6. INSTALL CRANKSHAFT POSITION SENSOR
(See page IG-13)
7. INSTALL OIL FILTER, OIL COOLER AND FILTER
BRACKET ASSEMBLY
(a) Install the a new gasket to the oil filter bracket.
(b) Install the oil filter, oil cooler and filter bracket assembly
with the 2 bolts and nut.
Torque: 18 N´m (185 kgf´cm, 13 ft´lbf)
(c) Connect the oil pressure switch connector.
8. INSTALL OIL DIPSTICK GUIDE AND DIPSTICK
(a) Install a new O-ring to the dipstick guide.
(b) Apply soapy water to the O-ring.
(c) Push in the dipstick guide end into the guide hole of the
No.1 oil pan.
(d) Install the dipstick guide with the bolt.
Torque: 15 N´m, (155 kgf´cm, 11 ft´lbf)
(e) Install the dipstick.
9. INSTALL CRANKSHAFT TIMING PULLEY
(See page EM-22)
10. INSTALL NO.1 IDLER PULLEY (See page EM-22)
11. INSTALL NO.2 IDLER PULLEY (See page EM-22)
12. INSTALL TIMING BELT (See page EM-22)
13. DISCONNECT ENGINE FROM ENGINE STAND
14. INSTALL ENGINE TO VEHICLE (See page EM-81)

LU08Q-08
B04486
Pull O-Ring
B03736
B04629
SST SST
LU-8
- LUBRICATIONOIL PUMP
1789 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REMOVAL
HINT:
When repairing the oil pump, the oil pan and strainer should be
removed and cleaned.
1. REMOVE ENGINE FROM VEHICLE
(See page EM-77)
2. INSTALL ENGINE TO ENGINE STAND FOR DIS-
ASSEMBLY
3. REMOVE TIMING BELT (See page EM-15)
4. REMOVE NO.1 IDLER PULLEY (See page EM-15)
5. REMOVE NO.2 IDLER PULLEY (See page EM-15)
6. REMOVE CRANKSHAFT TIMING PULLEY
(See page EM-15)
7. REMOVE OIL DIPSTICK AND GUIDE
(a) Remove the bolt holding the oil dipstick to the LH cylinder
head.
(b) Pull out the dipstick guide together with the dipstick from
the No.1 oil pan.
(c) Remove the O-ring from the dipstick guide.
8. REMOVE OIL FILTER, OIL COOLER AND FILTER
BRACKET ASSEMBLY
(a) Disconnect the oil pressure switch connector.
(b) Remove the 2 bolts, nut, and oil filter, oil cooler and filter
bracket assembly.
(c) Remove the gasket from the filter bracket.
9. REMOVE CRANKSHAFT POSITION SENSOR
(See page IG-12)
10. REMOVE NO.2 OIL PAN
(a) Remove the 20 bolts and 2 nuts.
(b) Insert the blade of SST between the No.1 and No.2 oil
pans, cut off applied sealer and remove the No.2 oil pan.
SST 09032-00100
NOTICE:

Be careful not to damage the No.2 oil pan contact sur-
face of the No.1 oil pan.

Be careful not to damage the No.2 oil pan flange.

PP0U3-05
- PREPARATIONSFI
PP-9
68 Author
: Date
:
2004 LAND CRUISER (RM1071U)
SFI
SST (Special Service Tools)
09023-12700Union Nut Wrench 17mmFuel line flare nut
09268-41047Injection Measuring Tool Set
(09268-41091)NO.7 Union
(09268-41 110)Adaptor
(09268-41300)Clamp
09268-45014EFI Fuel Pressure Gauge
(09268-41 190)Adaptor
(90405-06167)I Union
09612-24014Steering Gear Housing Overhaul
Tool Set
(09617-2401 1)Steering Rack WrenchFuel pressure pulsation damper
09816-30010Oil Pressure Switch SocketKnock sensor
09842-30070Wiring ºFº EFI Inspection

SS0OP-02
SS-24
- SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
164 Author
: Date
:
2004 LAND CRUISER (RM1071U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
No.1 vehicle speed sensor x Transfer case1616012
No.2 vehicle speed sensor x Transmission case NT
SP25.4
5.455
5548 in.´lbf
48 in.´lbf
ATF temperature sensor (for linear control ) x Valve body1111 28
ATF temperature sensor (for oil temp warning lamp ) x Valve body101007
ATF temperature sensor x Transmission case5.45548 in.´lbf
Park/neutral position switch Bolt
Nut13
3.9130
409
35 in.´lbf
Transmission control shaft lever x Transmission control rod131309
Shift solenoid lock plate x Valve body6.46557 in.´lbf
Shift solenoid S1 S2 x Valve body101027
Shift solenoid SR x Valve body6.46557 in.´lbf
Valve body x Transmission case1111 08
Oil stainer x Valve body101007
Oil pan x Transmission case4.45539 in.´lbf
Drain plug x Oil pan2020515
Parking lock pawl bracket x Transmission case7.47565 in.´lbf
Shift lever assembly x Body8.38573 in.´lbf
Control lever x Shift lever plate131309
Transmission control rod x Shift lever assembly131309
Shift lever guide housing x Shift lever plate4.95043 in.´lbf
Power steering oil cooler sub-assy x Body7.57666 in.´lbf
Oil cooler bracket x Body1211 78
Oil cooler bracket x Oil cooler4.95043 in.´lbf
Oil cooler pipe x Body4.95043 in.´lbf
Oil filler pipe121229
Transfer shift lever x Transfer shift lever rod assembly121229
Transfer shift lever boot x Body5.45548 in.´lbf
Hole plug x Transmission housing1818513
Drive plate x Torque converter clutch4849035
Oil cooler pipe union nut3434725
Crossmember Bolt
Nut50
74510
75037
54
Engine mounting insulator rear x Transmission case5960043
Transmission housing x Engine Bolt A
Bolt B71
37724
37752
27
Drive plate x Crankshaft 1st
2nd49
Turn 90°500
Turn 90°36
Turn 90°

SS0CN-30
SS-46
- SERVICE SPECIFICATIONSBODY ELECTRICAL
186 Author
: Date
:
2004 LAND CRUISER (RM1071U)
BODY ELECTRICAL
SERVICE DATA
AUTOMATIC LIGHT CONTROL SENSOR
(Connector disconnected)
3 - Ground (Ignition switch ON)5.2 - 9.0V
TURN SIGNAL FLASHER
1 - Ground (Ignition switch LOCK or ACC)No voltage
1 - Ground (Ignition switch ON)Battery positive voltage
4 - Ground (Constant)Battery positive voltage
SPEEDOMETER (ON-VEHICLE)
USA:
Standard indication (mph)Allowable range (mph)
2018 - 24
4038 - 44
6056 - 66
8078 - 88
10098 - 110
120118 - 132
CANADA:
Standard indication (km/h)Allowable range (km/h)
2017 - 24
4038 - 46
6057.5 - 67
8077 - 88
10096 - 109
120115 - 130
140134 - 151.5
160153 - 173
TACHOMETER (ON-VEHICLE)/ DC 13.5 V 25 °C at (77 °F)
Standard indicationAllowable range
700630 - 770
1,000900 - 1,100
2,0001,850 - 2,150
3,0002,800 - 3,200
4,0003,800 - 4,200
5,0004,800 - 5,200
6,0005,750 - 6,250
7,0006,700 - 7,300
FUEL SENDER GAUGE
Float position mm (in.)Voltage (V)
F: Approx. 85.3 (3.36)Approx. 0.30 ± 0.1
1/2: Approx. 1.7 (0.76)Approx. 2.45 ± 0.1
E: Approx. 9.19 (3.62)Approx. 4.60 ± 0.1
DEFOGGER SWITCH (w/ Navigation)
B22 - Ground (Ignition switch LOCK or ACC)No voltage

SS-50
- SERVICE SPECIFICATIONSBODY
190 Author
: Date
:
2004 LAND CRUISER (RM1071U) Tail gate stay x Door panel
18.518914
Tail gate stay x Body18.518914
Door hinge x Body2828621
Door hinge x Door panel3131623
Door lock striker x Body11.511 78
Back door lock control x Door panel5.05144 in.´lbf
Upper back door striker x Door panel11.511 78
BACK DOOR STAY---
Back door stay x Body17.517813
Back door stay x Door panel1313310
FRONT WIPER AND WASHER---
Wiper arm x Wiper link2020415
Wiper link x Body5.45548 in.´lbf
REAR WIPER AND WASHER---
Wiper motor and link assembly x Door panel5.45548 in.´lbf
Wiper arm x Wiper link5.45548 in.´lbf
INSTRUMENT PANEL---
Front passenger airbag assembly x Reinforcement2020415
Steering wheel set nut5051037
Front passenger airbag assembly x Instrument panel6.06153 in.´lbf
SIDE STEP---
No. 1 side step bracket x Side step5.05144 in.´lbf
No. 1 side step bracket x Body1818413
No. 2 side step bracket x Side step5.05144 in.´lbf
No. 2 side step bracket x Body Bolt:1818413
No. 2 side step bracket x Body Nut:121209
No. 3 side step bracket x Side step5.05144 in.´lbf
No. 3 side step bracket x Body1818413
FRONT SEAT---
Front seat adjuster x Body4243031
Seatback assembly x Seat adjuster4344032
Armrest x Seatback assembly3738027
Seat cushion assembly x Seat adjuster2121015
Seat position control relay x Seat adjuster5.55649 in.´lbf
Seatback cover x Seatback frame w/ Side airbag:4.74842in.´lbf
Seat position sensor x Seat adjuster Driver's side:8.08271in.´lbf
REAR NO. 1 SEAT (LH)---
Seat cushion hinge x Body3738027
Seatback assembly x Seat adjuster4142030
Seat adjuster x Seat cushion frame4142030
REAR NO. 1 SEAT (RH)---
Seat cushion hinge x Body3738027
Seatback assembly x Seat adjuster3738027
Seat adjuster x Seat cushion frame3738027
REAR NO. 2 SEAT---
Seatback assembly x Reclining adjuster4142030

SS063-18
- SERVICE SPECIFICATIONSBRAKE
SS-41
181 Author
: Date
:
2004 LAND CRUISER (RM1071U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Brake line union nut1515511
Hydraulic brake booster clevis lock nut2526019
Hydraulic brake booster x Pedal bracket1515511
Brake pedal bracket set bolt2020014
ABS ECU or ABS & BA & TRAC & VSC ECU set nut5.05144 in.´lbf
Bleeder plug1111 08
Front disc brake caliper x Flexible hose3031022
Front disc brake mounting bolt x Steering knuckle1231,25090
Rear disc brake caliper installation bolt2627020
Rear disc brake caliper x Flexible hose3031022
Rear disc brake torque plate x Rear backing plate1031,05076
Reservoir set screw1.717.515.2 in.´lbf
Master cylinder pressure sensor (w/ ABS & BA & TRAC & VSC only)8183060
Accumulator x Booster pump motor5455036
Front speed sensor installation bolt8.08271 in.´lbf
Front speed sensor harness clamp bolt131309
Rear speed sensor installation bolt8.08271 in.´lbf
Rear speed sensor harness clamp bolt131309
Front brake disc x Front axle hub7475054
Parking brake bellcrank assembly x Backing plate131309
Bellcrank stopper bolt lock nut5.45548 in.´lbf