audio TOYOTA LAND CRUISER 2002 J100 Navigation Manual

17
CAUTION
To reduce the chance of injury in case
of an accident or a sudden stop, always
keep the console box closed while driv-
ing.
(b) Playing a disc
ung627
Push the DISCº button if the magazine is
already loaded in the player.
DVD CHANGERº appears on the display.
The discs set in the magazine are played
continuously, starting with disc number 1.
The disc number of the disc currently being
played, the track number and the time from
the beginning of the program are shown on
the display. (c) Selecting a desired disc
unx609
On the screen: Touch the desired disc
number.
The selected disc number is highlighted in
green.
The player will start playing the selected disc
from the first track.
On the audio panel: Push the 

º or º
side of the DISCº button.
When you release the button, the player will
start playing the selected disc from the first
track.

18(d) Operating an audio CD
(i) Playing an audio CD
unx610
Push the number of the disc you want to
play. The selected disc is automatically
played. (ii) Selecting a desired track
UNC622a
TRACKº button: Use for direct access to
a desired track.
Push either side of the TRACKº
button and
hold it until the desired track number appears
on the display. As you release the button, the
player will start playing the selected track
from the beginning.
Fast forward: Touch the 
º switch and
hold it to fast forward the disc. When you re-
lease the switch, the player will resume play-
ing from that position.
Reverse: Touch the 
º switch and hold it
to reverse the disc. When you release the
switch, the player will resume playing. (iii) Searching for a desired track or a
disc
unx012
Touch the SCANº switch.
SCANº will be highlighted in green. The
player will play the next track for 10 seconds,
then scan again. To select a track, touch the
SCANº switch a second time. If the player
reaches the end of the disc, it will continue
scanning at track 1.

19
Touch the DISK SCANº switch.
DISC SCANº will be highlighted in green.
The program at the beginning of each disc
will be played for 10 seconds. To continue lis-
tening to the program of your choice, touch
the DISC SCANº switch a second time.
After all the audio disc are scanned in one
pass, normal play resumes.
(iv) Other functions
unx013
RPTº
switch: Use it for automatic repeat of
the track you are currently listening to.
Touch the switch while the track is playing.
When the track is finished, the player will au-
tomatically go back to the beginning of the
track and play the track again. To cancel it,
touch the switch once again.
DISC RPTº switch: Use it for automatic re-
peat of the disc you are currently listening to.
Touch the switch while the disc is playing.
When the disc is finished, the player will auto-
matically go back to the beginning of the disc
and play the disc again. To cancel it, touch
the switch once again. RANDº switch: Use it for automatic and
random selection of the disc which you are
currently listening to.
When the switch is touched, the system se-
lects a track in the disc you are currently lis-
tening
to. To cancel it, touch the switch once
again.
DISC RANDº switch: Use it for automatic
track selection for all the audio discs and play
by the system.
When the switch is touched, the system se-
lects a track in all the audio discs in the mag-
azine which is set and plays it. To cancel it,
touch the switch once again.

20(e) Operating a DVD video disc
Precautions: The playback condition of
some DVD video discs may be determined
by a DVD video software producer. This
DVD player plays a disc as the software pro-
ducer intended. So some functions may not
work prop
erly. Be sure to read the instruction
manual for the DVD video disc separately
provided. (i) DVD video discs
This DVD player conforms to NTSC color
TV formats. The DVD video disc conform-
ing to another formats such as PAL or SE-
CAM cannot be used.
Region codes: Some DVD video discs
have a region code indicating a country
where you can use the DVD video disc on
this DVD player. If the DVD video disc is not
labeled as ALLº or 1º, you cannot use it on
this DVD player. If you attempt to play an in-
appropriate DVD video disc on this player,
REGION CODE ERRORº appears on the
screen. Even if the DVD video disc does not
have a region code, there is a case that you
cannot use it. Marks shown on DVD video discs:
indicates NTSC format
of color TV.
indicates the number
of audio tracks.
indicates the number
of language subtitles.
indicates the number
of angles.
indicates the screen
to be selected.
Wide screen: 16:9
Standard: 4:3
indicates a region code
by which this video disc
can be played.
ALL: in all countries
Number: region code

21
(ii) DVD video disc glossary
DVD video discs: DVD in which animated
pictures are memorized. DVD video discs
have adopted MPEG2º, one of the world
standards of digital compression technolo-
gies. The picture data is compressed by
1/40 on average and memorized. The vari-
able rate encoded technology in which the
volume of data assigned to the picture is
changed depending on the picture format
has also been adopted. Audio data is memo-
rized using PCM and Dolby digital, which en-
ables higher quality of sound. Furthermore,
multi-angle and multi-language features will
also help you enjoy more advanced technol-
ogy of DVD video.
Viewer restrictions: This feature limits the
viewers in conformity with a level of restric-
tions of the country. The level of restrictions
varies depending on the DVD video disc.
Some DVD video discs cannot be played at
all, or violent scenes are skipped or replaced
with other scenes.
Level 1: DVD video discs for children can be
played.
Level 2 - 7: DVD video discs for children and
G-rated movie can be played.
Level 8: All types of the DVD video discs can
be played. Multi-angle feature: You can enjoy the
same scene at different angles.
Multi-language feature: You can select a
language of the subtitle and audio.
Region codes:
The region codes are pro-
vided on DVD players and DVD discs. If the
DVD video disc does not have the same re-
gion code as on the DVD player, you cannot
play the disc on the DVD player.
Audio: This DVD player can play liner PCM
and Dolby digital and MPEG audio format
DVD. Other decorded type cannot be play-
able.
Title and chapter: Video and audio pro-
grams stored in DVD video disc are divided
in parts by title and chapter.
Title: The largest unit of the video and audio
programs memorized in DVD video discs.
Usually, one piece of movie, one album, or
one audio program is assigned as a title.
Chapter: The unit smaller than that of title.
A title comprises plural chapters. Manufactured under license from Dolby
Laboratories. Dolbyº, Pro Logicº, and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpub-
lished works.

1992- 1997 Dolby Laboratories. All
rights reserved.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be autho-
rized by Macrovision Corporation, and is
intended for home and other limited view-
ing uses only unless otherwise autho-
rized by Macrovision Corporation. Re-
verse engineering or disassembly is
prohibited.
DTSº is a trademark of Digital Theater
Systems, Inc.

22(iii) Precautions on DVD video disc
When recording with a DVD video or video
CD, audio tracks may not record in some
cases while the menu is displayed. As audio
will not play in this case, verify that the video
tracks are playing and then activate play-
back.
When playback of a disc is completed:
 If an audio CD is playing, the next CD will
be selected and playback will begin auto-
matically.
 If a DVD video or video CD is playing,
playback will stop or the menu screen will
be displayed. The next disc will not play
back automatically. (Audio tracks cannot
be heard while the disc is stopped)
The title/chapter number and playback time
display may not appear while playing back
certain DVD video discs.
Conversational speech on some DVDs is re-
corded at a low volume to emphasize the im-
pact of sound effects. If you adjust the vol-
ume assuming that the conversations
represent the maximum volume level that the
DVD will play, you may be startled by louder
sound ef fects or when you change to a differ-
ent audio source. Be sure to adjust the vol-
ume with this in mind. (iv) Playing a DVD video disc
unx614
Push the number of the disc you want to
play. The selected disc is automatically
played.
When you touch the PICTUREº switch, the
video screen appears.
(v) Displaying operation switches
unx615
unx616
If you touch the part where switches are not
located while you are watching video, DVD
video operation switches will appear.

23

Second Pageº switch: Use this switch to
display the operation switches on the sec-
ond page.
Top Pageº switch:Use this switch to dis-
play the operation switches on the top page.
Hide Keysº switch: Use this switch to turn
off the operation switches from the display.
If 
º appears on the display when you
touch a switch, the operation relevant to the
switch is not permitted. (vi) Description of each switch
 Switches on top page
SET UPº switch: The initial set up screen
appears. (See page 25.)

º, Menuº and Top Menuº switches:
If you touch any of the above switches, the
menu screen for DVD video appears. (For
the operation, see the manual for the DVD
video disc provided separately.)
Angleº switch: T h e a n g le s e le c tio n
screen appears. (See page 25.)
Sub Titleº switch: The subtitle changing
screen appears. (See page 24.)
Audioº switch: The audio changing
screen appears. (See page 24.)
 Switches on second page
Searchº switch: The title search screen
appears. (See page 24.)

º switch: Use this switch to pause the
video screen. When you touch this switch
again, the video screen advances frame by
frame.

º switch: Use this switch to stop play-
ing video. 
 º switch: Touch this switch to fast re-
verse during the playback and reverse slow-
ly during the pause.
  º switch: Use this switch to cancel the
stop and pause to normal playing.
  º switch: Touch this switch to fast for-
ward du ring the playback and forward slowly
during the pause.

º switch: Use this switch to display the
predetermined scene and start playing from
there.

24(vii) Searching by title
unx622
Enter the title number using -º, +º and
+10º switches and touch Enterº. The
player starts playing video for that title
number.
When you push 

º or º on the TRACKº
switch, you can select a chapter.
Touch Returnº, the previous screen returns. (viii)Changing the subtitle language
unx620
Each time you touch Sub Titleº, the lan-
guage is se
lected from the ones stored in
the discs and changed.
To turn off the subtitle, touch Hideº.
Touch Returnº, the previous screen returns. (ix) Changing the audio languageEach time you touch Audioº, the lan-
guage is sel
ected from the ones stored in
the discs and changed.
Touch Returnº, the previous screen returns.

25
(x) Changing the angle
unx619
The angle can be selected from the disc in
which the multi-angle is memorized and
changed
when the angle mark appears on
the display.
Each time you touch Angleº, the angle
changes.
Touch Returnº, the previous screen returns. (xi) Setup menu
unx617
The initial setting can be changed.

Audio language
You can change the audio language.
1. Touch Audio Lang.º
2. Touch a language you want to hear on
the Select Audio Lang.º screen and En-
terº.
If you cannot find a language you want to
hear on this screen, touch Othersº and enter
a language code. For the entry of language
code, see page 26. 
Subtitle language
You can change the subtitle language.
1. Touch Subtitle Lang.º
2. Touch a language you want to read on
the Select Subtitle Lang.º screen and
Enterº.
If you cannot find a language you want to
read on this screen, touch Othersº and enter
a language code. For the entry of language
code, see page 26.
 DVD language
You can change the language on the DVD
video menu.
1. Touch DVD Languageº
2. Touch a language you want to read on
the Select DVD Languageº screen and
Enterº.
If you cannot find a language you want to
read on this screen, touch Othersº and enter
a language code. For the entry of language
code, see page 26.

31
(iv) Searching by track
unx626
Enter the track numbers using -º, +º
and +10º switches and touch Enterº.
The player starts playing video for that
title number.
You can select a track number by pushing


º or º on the TRACKº button.
Touch Returnº, the previous screen returns.
(h) If the player malfunctions
If the player or another unit equipped with the
player malfunction, your audio system will
display one of the six following messages.
If DISC CHECKº appears on the display:
It indicates that the disc dirty, damaged, or it
was inserted up-side down. Clean the disc
or insert it correctly.
If NO DISCº appears on the display: It in-
dicates that there is no disc in the DVD play-
er.
If REGION CODE ERRORº appears on
the display: It indicates that the DVD region
code is not set properly.
If DVD DOOR OPENº appears on the dis-
play: It indicates that the door of the DVD
player is open.
If DVD ERRORº appears on the display:
It indicates that the inside of the player unit
may be too hot due to the very high ambient
temperature. Remove the magazine from
the player and allow the player to cool down.
If NO DVD MAGAZINEº appears on the
display: It indicates that the magazine is not
inserted into the DVD player.
If the malfunction is not rectified: Take
your vehicle to your Toyota dealer.
NOTICE
To ensure correct audio system opera- tion:
Be careful not to spill beveragesover the audio system.
Do not put anything other than a cas-sette tape or magazine into the cas-
sette tape slot or DVD player.
The use of a cellular phone inside ornear the vehicle may cause a noise
from the speakers of the audiosystem which you are listening to.
However, this does not indicate amalfunction.
Radio reception
Usually, the problem with radio reception
does not mean there is a problem with your
radio - it is just the normal res ult of conditions
outside the vehicle.
Car audio system operating
hints