engine TOYOTA LAND CRUISER 2002 J100 Navigation Manual

ii
Important information about this manual
For safety reasons, this manual indicates
items requiring particular attention with the
following marks.
CAUTION
This is a warning against something
that may cause injury to people if the
warning is ignored. You are informed
about what you must or must not do in
order to avoid or reduce the risk to
yourself and other people.
NOTICE
This is a warning against somethingwhich may cause damage to the ve-hicle or its equipment if the warning isignored. You are informed about whatyou must or must not do in order toavoid or reduce the risk of damage toyour vehicle and its equipment.
INFORMATION
This provides additional information.
Initial screen
UN001
When you start the engine or turn the ignition
key to ºACCº, the initial ºTOYOTAº screen
appears and the system begins operating.
CAUTION
When the vehicle is stopped with the
engine running, always apply the park-
ing brake for safety.
After a few seconds, the ºCAUTIONº screen
appears.
UN002
Please read it and follow the instructions.
If a screen other than for the navigation sys-
tem is displayed (i.e., for the trip information
screen), the current screen would change to
the ºCAUTIONº screen by pushing the
ºMAP/VOICEº, ºDESTº or ºMENUº
button on the bezel or by touching the
ºMaintenanceº switch on the informa-
tion menu screen.
When you touch the
ºI agreeº switch on
the screen, the ºmapº screen appears.

5
Touch the
ºOFFº switch at the top of the
screen, and the information screen will no
longer be displayed.
INFORMATION

For scheduled maintenance infor- mation, please refer to the ºSched-uled Maintenance Guideº or ºOwn-er's Manual Supplementº.

Depending on your driving or theroad conditions, the system mayhave a time-lag between the datawhich have been inputted and theactual date and driving distance.
Information Items
Scheduled Maintenance
Oil Change
Replace Oil Filter
Rotate Tires
Replace Tires
Replace Battery
Replace Brake Pad
Replace Wiper Blades
Replace Engine Coolant
Replace Brake Fluid
Replace Automatic
Transmission Fluid
Replace Air Conditioning
Filter
Replace Air Cleaner Filter
Wedding Anniversary
Birthday

41


The automatic air conditioning auto-
matically maintains the set tempera-
ture.
This air conditioning features automatic
fan speed and air flow control which auto-
matically selects the most suitable fan
speed and air flow to control the tempera-
ture. The ignition key must be in the ºONº
position.
CLIMATE: Push this button to display
switches for automatic air conditioning con-
trols.
NOTICE
To prevent the battery from being dis- charged, do not leave the air condition-
ing on longer than necessary when the
engine is not running.
SETTING OPERATION - automatic con-
trol
UNC501
1. Push the ºAUTOº button.
Air flow quantity, switching of the diffusers,
on-of f of the air conditioning, and switching
of the air intake between RECIRCULATED
AIR and OUTSIDE AIR are automatically ad-
justed. The operation status is shown by
each indicator.
When one of the manual control buttons is
depressed while operating in automatic
mode, the mode relevant to the depressed
button is set. Other conditions continue to be
adjusted automatically. Push
the ºOFFº button to turn the air condi-
tioning off.
It is recommended that you close the lower
vent. For details about this, see page 46.
(a) Climate control

43
If manual fan speed control is desired -
UNX505

1
Fan speed at low
2Fan speed at high
The fan speed can be set to your desired
speed by touching the appropriate air flow
control switch. The higher the fan speed is,
the more air is delivered. Pushing the ºOFFº
button turns off the fan.
To remove exterior windshield frost, use the
high speed setting.
The selected mode is highlighted in green. If manual switching of air intake is de-
sired -
UNC503
The air intake control button is used to switch
the air intake between the OUTSIDE AIR
mode and RECIRCULATED AIR mode.
With the button in the OUTSIDE AIR mode,
the OUTSIDE AIR mode indicator light will
come on and the system will take fresh out-
side air into the vehicle.
If quick circulation of cooled air is desired,
push the air int
ake control button for RECIR-
CULATED AIR. The RECIRCULATED AIR
mode indicator light will come on. For normal use, it is best to keep the air in-
take control button set to OUTSIDE AIR
mode. If recirculated air is used during heat-
ing, the windows will fog up more easily.
If the engine coolant temperature becomes
extremely high, the RECIRCULATED AIR
mode is automatically selected. This is not
a malfunction. When the engine coolant
temperature is lowered, the previous mode
resumes.

3
This
section describes some of the basic fea-
tures of the audio system. Some information
may not pertain to your system.
Your audio system works when the ignition
key is in the ºACCº or ºONº position.
NOTICE
To prevent the battery from being
discharged, do not leave the car audioon longer than necessary when the
engine is not running.
POWER-VOL: Push this knob to turn the
audio system on and off. Turn this knob to
adjust the volume. The system turns on in
the last mode used.
AUDIO: Push this button to display switches
for audio system.
UNC608
Push the ºAMº, ºFMº, ºTAPEº or ºDISCº
button to turn on that mode. The selected
mode turns on directly.
Push th ese buttons if you want to switch from
one mode to another.
If the tape or disc is not set, the cassette play-
er or compact disc player does not turn on.
You can turn off the cassette player by eject-
ing the cassette tape. If the audio system
was previously off, then the entire audio sys-
tem will be turned off when you eject the cas-
sette tape. If another function was previously
playing, it will come on again.
Using your audio system:
some basics (a) Turning the system on and
off

21
(ii) DVD video disc glossary
DVD video discs: DVD in which animated
pictures are memorized. DVD video discs
have adopted MPEG2º, one of the world
standards of digital compression technolo-
gies. The picture data is compressed by
1/40 on average and memorized. The vari-
able rate encoded technology in which the
volume of data assigned to the picture is
changed depending on the picture format
has also been adopted. Audio data is memo-
rized using PCM and Dolby digital, which en-
ables higher quality of sound. Furthermore,
multi-angle and multi-language features will
also help you enjoy more advanced technol-
ogy of DVD video.
Viewer restrictions: This feature limits the
viewers in conformity with a level of restric-
tions of the country. The level of restrictions
varies depending on the DVD video disc.
Some DVD video discs cannot be played at
all, or violent scenes are skipped or replaced
with other scenes.
Level 1: DVD video discs for children can be
played.
Level 2 - 7: DVD video discs for children and
G-rated movie can be played.
Level 8: All types of the DVD video discs can
be played. Multi-angle feature: You can enjoy the
same scene at different angles.
Multi-language feature: You can select a
language of the subtitle and audio.
Region codes:
The region codes are pro-
vided on DVD players and DVD discs. If the
DVD video disc does not have the same re-
gion code as on the DVD player, you cannot
play the disc on the DVD player.
Audio: This DVD player can play liner PCM
and Dolby digital and MPEG audio format
DVD. Other decorded type cannot be play-
able.
Title and chapter: Video and audio pro-
grams stored in DVD video disc are divided
in parts by title and chapter.
Title: The largest unit of the video and audio
programs memorized in DVD video discs.
Usually, one piece of movie, one album, or
one audio program is assigned as a title.
Chapter: The unit smaller than that of title.
A title comprises plural chapters. Manufactured under license from Dolby
Laboratories. Dolbyº, Pro Logicº, and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpub-
lished works.

1992- 1997 Dolby Laboratories. All
rights reserved.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be autho-
rized by Macrovision Corporation, and is
intended for home and other limited view-
ing uses only unless otherwise autho-
rized by Macrovision Corporation. Re-
verse engineering or disassembly is
prohibited.
DTSº is a trademark of Digital Theater
Systems, Inc.