battery location TOYOTA LAND CRUISER 2007 J200 Navigation Manual

v The current position is automatically set as
your vehicle receives signals from the GPS
(Global Positioning System). If your current
position is not correct, it is automatically cor-
rected after your vehicle receives signals
from the GPS.
INFORMATION
After the battery disconnection, or
on a new vehicle, the current posi-
tion may not be correct. As soon as
the system receives signals from the
GPS, the correct current position is
displayed.
To correct the current position
manually, see page lxxxviii.
Screen scroll operation
(onetouch scroll)
Touch any point on the map and that
point moves to the center of the screen
and is shown by the cursor mark.
If you wish to look at a point on the map
which is different to your current vehicle
position, you can bring the desired point to
the center of the screen by using the scroll
feature.
If you continue to hold your finger on the
screen, the map will continue scrolling in that
direction until you lift your finger.After you scroll the screen, the map remains
centered at the selected location until you
activate another function. The current ve-
hicle position mark will continue to move
along your actual route and may move off
the screen. When you touch the
“MAP/
VOICE” button, the current vehicle posi-
tion mark returns to the center of the screen
and the map moves as you proceed along
the designated route.
INFORMATION
When you use the onetouch scroll
feature, the current vehicle position
mark may disappear from the screen.
Move the map with a onetouch scroll
again or push the
“MAP/VOICE”button to return to the current vehicle
position map location display.