low beam TOYOTA LAND CRUISER 2010 J200 Navigation Manual

AUDIO/VIDEO SYSTEM
241
CARING FOR YOUR DVD CHANGER
AND DISCS
Your DVD changer is intended for use
with 4.7 in. (12 cm) discs only.
Extremely high temperatures can keep
your DVD changer from working. On
hot days, use the air conditioning to
cool the vehicle interior before you use
the changer and player.
Bumpy roads or other vibrations may
make your DVD changer skip.
If moisture gets into your DVD changer,
you may not play even though they ap-
pear to be working. Remove the discs
from the changer and wait until it dries.
CAUTION
DVD changer use an invisible laser
beam which could cause hazardous
radiation exposure if directed out-
side the unit. Be sure to operate the
changers correctly.
Audio CDs
DVD video
discs
Video CDs
DVD audio
discs
Use only discs marked as shown abo-
ve. The following products may not be
playable on your changer.
SACD
Copy− protected CD
CD−ROM
DVD−R
DVD+R
DVD−RW
DVD+RW
DVD−ROM
DVD−RAM

REAR VIEW MONITOR SYSTEM
264
The area displayed on the screen may
vary according to vehicle orientation or
road conditions.
The rear view monitor system cam-
era
The rear view monitor system camera is lo-
cated on the back door as shown in the il-
lustration.
The camera uses a special lens. The dis-
tance of the image that appears on the
screen differs from the actual distance.
In the following cases, it may become diffi-
cult to see the images on the screen, even
when the system is functioning.
In the dark (for example, at night)
When the temperature near the lens is
high or low
When water droplets are adhering to
the camera, or when humidity is high
(for example, when it rains)
When foreign matter (for example,
snow or mud) is adhering to the camera
When the camera has scratches or dirt
on it
When the sun or the beam of head-
lights is shining directly into the camera
lens