display TOYOTA PRIUS 2008 2.G Quick Reference Guide

2
BASIC HYBRID VEHICLE
OPERATION
Hybrid Synergy Drive System
The Hybrid Synergy Drive System utilizes a computer
controlled gasoline engine and electric motor to
provide the most efficient combination of power for
the vehicle. To conserve energy, when the brakes
are applied, braking force generates electricity
which is then sent to the traction battery. In
addition, the engine shuts off when the vehicle is
stopped. The benefits are better fuel economy,
reduced vehicle emissions and improved
performance.
Note: Fuel consumption and energy information
of the Hybrid System are shown on the
multi-information display. Refer to this
screen for important driving information
and feedback to maximize energy
use/creation and conserve fuel.
Tips for improved fuel economy
-Ensure tire pressures are maintained at levels
specified in the Owner's Manual.
-If possible, link trips to reduce engine cold starts.
-Avoid driving at speeds that are higher than
necessary, especially on the highway.
-When possible, avoid sudden stops to maximize
regenerative braking energy.
-Minimize use of the Air Conditioning.
Refer to the Owner’s Manualfor more details.

10
OVERVIEW
Headlight, turn signal and front fog light1controls
Wiper and washer controls
“POWER” button
Clock
“AUDIO” switch (multi-information display control)
“CLIMATE” switch (multi-information display control)
Multi-information display
“DISPLAY” switch (multi-information display control)
“INFO” switch (multi-information display control)
Mph or km/h button
Trip meter reset
Emergency flasher button
Instrument panel

20
FEATURES/OPERATIONS
Passenger compartment temperature
Outside temperature
Temperature
Airflow vent
Fan speed
Automatic climate control ON
Fresh or recirculated cabin air
Rear window and outside rearview mirror
defogger
Windshield airflow
Air Conditioning ON/OFF
Climate control OFF
Display the operation screen
1
Air Conditioning/Heating
1For details, refer to the “Navigation System
Owner’s Manual.”
With navigation system1
Type 2 functions
Type 1 functions

23
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
CD PLAYER
To scan tracks on a disc Touch “SCAN” icon on the
display. Push again to hold selection.
CD changer (Type 2 only)
-To load one disc Push “LOAD” and insert one disc.
-To load multiple discs Push and hold “LOAD” until
you hear a beep. Insert one disc. Shutter will close
and then re-open for next disc.
To select a file (MP3/WMA only) Turn “TUNE•FILE.”
“
- +”
Volume control
“MODE”
Push to turn audio ON and select an audio mode.
Push and hold to turn the audio system OFF.
“ ” switch
In radio modePush to select a preset station;
push and hold to seek the next strong station.
In CD modePush to skip up or down to
next/previous track.
>>
Steering wheel switches
By inserting a mini plug into the AUX audio jack, you
can listen to music from a portable audio device
through the vehicle’s speaker system.
AUX audio jack (if equipped)
Center
console

24
FEATURES/OPERATIONS
Luggage storage box
Unlock
Unlock
Bluetooth®technology allows you to place or receive
calls without taking your hands from the steering
wheel or using a cable to connect the telephone and
the system.
Refer to “Hands-free phone system (for cellular
phone),” Section 3-4 in the Owner’s Manualfor
more details.
Telephone controls (Bluetooth®)
(if equipped)
MicrophoneDisplay
Steering wheel telephone switches
Vo l u m e
Start call
End call
Vo i c e
command
button