oil grade TOYOTA PRIUS 2012 3.G Owners Manual

564 6-1. Specifications
■Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the good choice
for good fuel economy and good
starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allowscold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil when
the oil is at high temperature. An oil with a higher viscosity (one with a
higher value) may be better suited if the vehicle is operated at high
speeds, or under extreme load conditions.
Outside temperature

636
GAS STATION INFORMATION
Fuel filler doorP. 131Auxiliary catch lever P. 4 1 3
Fuel filler door opener P. 131Tire inflation pressureP. 569Hood lock release lever P. 413
Fuel tank capacity
(Reference)11.9 gal. (45 L, 9.9 Imp.gal.)
Fuel type Unleaded gasoline only P. 562
Cold tire inflation
pressure P. 5 6 9
Engine oil capacity
(Drain and refill


reference) qt. (L, Imp.qt.)
With filter 4.4 (4.2, 3.7)
Without filter 4.1 (3.9, 3.4)
Engine oil type Toyota Genuine Motor Oil or equivalent
Oil grade: ILSAC multigrade engine oil P. 563