fuel consumption TOYOTA PRIUS 2016 4.G Quick Reference Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2016, Model line: PRIUS, Model: TOYOTA PRIUS 2016 4.GPages: 56, PDF Size: 3.73 MB
Page 8 of 56

6
OVERVIEW
Keyless entry
Push
Push ONCE: Driver door
TWICE: All doors
Locking operation
Unlocking operation
Smart Key System (if equipped)
Start function
Panic button
Push and hold
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock
for safety.
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. Grasping passenger door handle or pushing unlock button on rear hatch
will unlock all doors. (If equipped)
NOTE: Fuel consumption and energy information of the hybrid system are
shown on the Dual Multi-Information Displays
p 160
p 161
Back door lock/unlock (if equipped)
Carry remote to
lock/unlock
Unlocking
Carry remote to unlock
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
Power modes (without starting Hybrid System)
When starting the hybrid system, make sure you are carrying the Smart key, the
parking brake is set and shift position is in P.
134261_Prius_QRG_GUTS.indd 612/18/15 1:30 PM
Page 9 of 56

SAFETY AND EMERGENCY FEATURES
TOYOTA SAFETY SENSE
FEATURES/OPERATIONS
OVERVIEW
7
Smart Key System (if equipped)
Start function
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock
for safety.
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. Grasping passenger door handle or pushing unlock button on rear hatch
will unlock all doors. (If equipped)
NOTE: Fuel consumption and energy information of the hybrid system are
shown on the Dual Multi-Information Displays
p 225, 709
p 165,
p 171,
Locking
Carry remote to lock
All-door lock
Touch
Back door lock/unlock (if equipped)
Carry remote to
lock/unlockLockUnlock
Unlocking
Carry remote to unlock
Driver door unlock*
Grasp
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
Power modes (without starting Hybrid System)
2ff - All systems 2 ) ). (mergency
Page 12 of 56

10
FEATURES/OPERATIONS
Hybrid transmission
Driving mode select switch
* The engine brake is the equivalent of downshifting. Shift to “B” when engine
braking is desired (i.e. downhill driving, coasting to a stop, etc.).
Starting your vehicle
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the
vehicle. To conserve energy, when the brakes are applied the braking force
generates electricity which is then sent to the traction battery. In addition,
the engine shuts off when the vehicle is stopped. The benefits are better fuel
economy, reduced vehicle emissions and improved performance.
NOTE: Fuel consumption and energy information of the hybrid system are shown on the Multi-Information Displays.
Tips for improved fuel economy
- (nsure tire pressures are maintained at levels specified in the Owner’s Manual.
-When possible, link trips to reduce engine cold starts.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of the Air Conditioning.
Hybrid Synergy Drive System
Auto lock/unlock
Automatic door locks can be programmed to operate in two different modes, or
turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed is approximately 12 mph or higher.
-Doors unlock when shifting into Park.
-Doors unlock when the driver’s door is opened within 10 seconds after turning the
“POWER” switch OFF.
Refer to the Owner’s Manual for more details. (1) Depress the brake pedal, and
press the “POWER” switch
brie
Page 13 of 56

SAFETY AND EMERGENCY FEATURES
TOYOTA SAFETY SENSE
FEATURES/OPERATIONS
OVERVIEW
11
Hybrid transmission
Driving mode select switch
*
The engine brake is the equivalent of downshifting. Shift to “B” when engine
braking is desired (i.e. downhill driving, coasting to a stop, etc.).
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the
vehicle. To conserve energy, when the brakes are applied the braking force
generates electricity which is then sent to the traction battery. In addition,
the engine shuts off when the vehicle is stopped. The benefits are better fuel
economy, reduced vehicle emissions and improved performance.
NOTE: Fuel consumption and energy information of the hybrid system are shown on the Multi-Information Displays.
- (nsure tire pressures are maintained at levels specified in the Owner’s Manual.
-When possible, link trips to reduce engine cold starts.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of the Air Conditioning.
Park button
Reverse
Neutral
Drive
Engine brake *
Automatic door locks can be programmed to operate in two different modes, or
turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed is approximately 12 mph or higher.
-Doors unlock when shifting into Park.
-Doors unlock when the driver’s door is opened within 10 seconds after turning the
“POWER” switch OFF.
Refer to the Owner’s Manual for more details. (1) Depress the brake pedal, and
press the “POWER” switch
brie
Page 20 of 56

18
FEATURES/OPERATIONS
Main display
Color Dual Multi-Information
Display (MID) Screens
Split
screen
Multi-Information Display (MID)
pg 107, 114
18
Push “
vv” to change between the following information screens, “” to
select, “vv” to switch contents and “” to go back:
Split screen mode shown above (can also be viewed in simple screen mode.)
The main display shows basic drive information. Push “” to view more info
for mileage and average fuel consumption display:
For more details, see Owner’s Manual.
Fuel gauge
Speedometer
Outside temperature
Hybrid system indicator and current
fuel consumption
Average fuel consumption display
Mileage display (odometer/trip
meters/driving range)
Power outlets
Front
Power switch must be set at “ACCESSORY” or “ON” mode to be used.
Steering wheel audio and
telephone controls
“MODE”
Push to turn audio ON and select an audio mode. Push and hold to mute/unmute
or pause/resume the current operation.
“
vv” Use to search within the selected audio medium (radio, CD, etc.).
End call
Start call
Steering wheel switches
and telephone controls (Bluetooth®)*
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the compatible telephone and
the system. Refer to “Bluetooth
® Device Pairing Section,” in this guide, for more
information about phone connections and compatibility.
* Position of buttons may vary on some vehicles, for more details please refer to the Owner’s Manual.
Volume
control
Warning message display
Settings display
Driving assist system information
(if equipped)
Drive information
Navigation system-linked
display (if equipped)
Audio system-linked
display (if equipped)
Air conditioning system
settings screen
Simple screen Main display
MIDSplit screen
134261_Prius_QRG_GUTS.indd 1812/18/15 1:31 PM
Page 21 of 56

SAFETY AND EMERGENCY FEATURES
TOYOTA SAFETY SENSE
FEATURES/OPERATIONS
OVERVIEW
19
pg 543
pg 484
Push “vv” to change between the following information screens, “” to
select, “vv” to switch contents and “” to go back:
Split screen mode shown above (can also be viewed in simple screen mode.)
The main display shows basic drive information. Push “
” to view more info
for mileage and average fuel consumption display:
For more details, see Owner’s Manual. Average fuel consumption display
Mileage display (odometer/trip
meters/driving range)
Power outlets
Front
Rear
Power switch must be set at “ACCESSORY” or “ON” mode to be used.
Microphone
Without moon roof
With moon roof
Steering wheel audio and
telephone controls
“MODE”
Push to turn audio ON and select an audio mode. Push and hold to mute/unmute
or pause/resume the current operation.
“
vv” Use to search within the selected audio medium (radio, CD, etc.).
End call
Start call
Steering wheel switches
and telephone controls (Bluetooth®)*
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the compatible telephone and
the system. Refer to “Bluetooth
® Device Pairing Section,” in this guide, for more
information about phone connections and compatibility.
* Position of buttons may vary on some vehicles, for more details please refer to the Owner’s Manual.
Volume
control
Talk
switch
Warning message display
Settings display
Driving assist system information
(if equipped)
134261_Prius_QRG_GUTS.indd 1912/18/15 1:31 PM