high beam TOYOTA PRIUS C 2020 Owners Manual

3
1
9 8 6 5
4
3
2
PRIUS c_U
10
7
4-1. Before drivingDriving the vehicle ............. 172
Cargo and luggage............ 181
Vehicle load limits ............. 185
Trailer towing..................... 186
Dinghy towing.................... 187
4-2. Driving procedures Power (ignition) switch (vehicles without a
smart key system) ........... 188
Power (ignition) switch (vehicles with a
smart key system) ........... 192
EV drive mode................... 199
Hybrid transmission........... 202
Turn signal lever................ 206
Parking brake .................... 207
4-3. Operating the lights and wipers
Headlight switch ................ 208
Fog light switch ................. 212
Windshield wipers and washer ..................... 214
Rear window wiper and washer ..................... 218 4-4. Refueling
Opening the fuel tank cap ........................... 221
4-5. Toyota Safety Sense C Toyota Safety Sense C...... 225
PCS (Pre-Collision System)..... 231
LDA (Lane Departure Alert)..... 241
Automatic High Beam ........ 246
4-6. Using the driving support systems
Cruise control .................... 251
Rear view monitor system ............................. 255
Driving assist systems ....... 265
4-7. Driving tips Hybrid vehicle driving tips ....................... 271
Winter driving tips .............. 274
4Driving

20Pictorial index
PRIUS c_U
■Switches
Automatic High Beam switch . . . . . . . . . . . . . . . . . . . . . . . . P. 246
Outside rear view mirror switches . . . . . . . . . . . . . . . . . . . . P. 161
Instrument panel light control dial . . . . . . . . . . . . . . . . . . . . P. 101
PCS (Pre-Collision system) switch . . . . . . . . . . . . . . . . . . . P. 231
LDA (Lane Departure Alert) switch. . . . . . . . . . . . . . . . . . . . P. 241
Window lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 163
Door lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 130
Power window switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 163
USB port/AUX port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 284
Tire pressure warning reset switch . . . . . . . . . . . . . . . . . . . P. 4361
2
3
4
5
6
7
8
9
10

972. Instrument cluster
2
Instrument cluster
PRIUS c_U
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
( P. 206) EV drive mode indicator
(
P. 199)
Headlight high beam
indicator ( P. 208)
Shift position indicator
(P. 203)
(U.S.A.)
Headlight indicator
(P. 208) “ECO MODE” indicator
(
P. 203)
(Canada)
Tail light indicator
(P. 208)EV drive indicator lamp
(P. 78)
(if equipped)
Front fog light indicator
(P. 212)
(if equipped)
Cruise control indicator
(P. 251)
*1Automatic High Beam
indicator ( P. 246)
(if equipped)
Cruise control set indica-
tor (P. 251)
(if equipped)
Immobilizer system indi-
cator (P. 88)*1, 2
Slip indicator ( P. 266)
*1VSC OFF indicator
(P. 267)
LDA indicator
(P. 241)
“READY” indicator
( P. 188, 192)
*1, 3PCS warning light
(P. 231)
“AIR BAG
ON/OFF” indi-
cator
(P. 52)*1
“AIR BAG
ON/OFF” indi-
cator
(P. 52)*1
(U.S.A.)
(Canada)

171
4Driving
PRIUS c_U4-1. Before driving
Driving the vehicle ............. 172
Cargo and luggage ........... 181
Vehicle load limits ............. 185
Trailer towing..................... 186
Dinghy towing ................... 187
4-2. Driving procedures Power (ignition) switch (vehicles without a
smart key system) ........... 188
Power (ignition) switch (vehicles with a
smart key system) ........... 192
EV drive mode .................. 199
Hybrid transmission........... 202
Turn signal lever................ 206
Parking brake .................... 207
4-3. Operating the lights and wipers
Headlight switch ................ 208
Fog light switch ................. 212
Windshield wipers and washer ..................... 214
Rear window wiper and washer ..................... 218 4-4. Refueling
Opening the fuel tank cap .......................... 221
4-5. Toyota Safety Sense C Toyota Safety Sense C ..... 225
PCS (Pre-Collision System) .... 231
LDA (Lane Departure Alert) .... 241
Automatic High Beam ....... 246
4-6. Using the driving support systems
Cruise control .................... 251
Rear view monitor system ............................ 255
Driving assist systems ...... 265
4-7. Driving tips Hybrid vehicle driving tips ....................... 271
Winter driving tips ............. 274

2094-3. Operating the lights and wipers
4
Driving
PRIUS c_U
Ty p e B
The daytime running
lights turn on. ( P. 210)
The side marker, park-
ing, tail, license plate,
instrument panel lights,
and daytime running
lights ( P. 210) turn on.
The headlights and all
lights listed above
(except daytime running
lights) turn on.
With the headlights on, push
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with the headlights on or off.
1
2
3
Turning on the high beam headlights
1
2

225
4
Driving
PRIUS c_U
4-5. Toyota Safety Sense C
■PCS (Pre-Collision System)
P. 2 3 1
■LDA (Lane Departure Alert)
P. 2 4 1
■Automatic High Beam
P. 2 4 6
Toyota Safety Sense C
The Toyota Safety Sense C consis ts of the following drive assist
systems and contributes to a safe and comfortable driving expe-
rience:
Driving assist system
WARNING
■ Toyota Safety Sense C
The Toyota Safety Sense C is designed to operate under the assu mption
that the driver will drive safely, and is designed to help redu ce the impact to
the occupants and the vehicle in the case of a collision or ass ist the driver in
normal driving conditions.
As there is a limit to the degree of recognition accuracy and control perfor-
mance that this system can provide, do not overly rely on this system. The
driver is always responsible for paying attention to the vehicl e's surround-
ings and driving safely.

2464-5. Toyota Safety Sense C
PRIUS c_U
Push the lever away from you
with the headlight switch in the position.
Press the Automatic High
Beam switch.
The Automatic High Beam indica-
tor will come on when the head-
lights are turned on automatically
to indicate that the system is
active.
Automatic High Beam
The Automatic High Beam uses an in-vehicle front sensor to
assess the brightness of streetl ights, the lights of vehicles
ahead etc., and automatically turns the high beam on or off as
necessary.
WARNING
■ Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, ta king care to
observe your surroundings and turning the high beam on or off m anually if
necessary.
■ To prevent incorrect operation o f the Automatic High Beam syste m
Do not overload the vehicle.
Activating the Automatic High Beam system
1
2

2474-5. Toyota Safety Sense C
4
Driving
PRIUS c_U■
Switching to low beam
Pull the lever to the original
position.
The Automatic High Beam indi-
cator will turn off.
Push the lever away from you to
activate the Automatic High
Beam system again.
■
Switching to high beam
Press the Automatic High
Beam switch.
The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.
Press the switch to activate the
Automatic High Beam system
again.
Turning the high beam on/off manually

2484-5. Toyota Safety Sense C
PRIUS c_U
■High beam automatic turning on or off conditions
●When all of the following conditions are fulfilled, the high be am will be auto-
matically turned on (after approximately 1 second):
• Vehicle speed is approximately 21 mph (33 km/h) or more.
• The area ahead of the vehicle is dark.
• There are no vehicles ahead with headlights or tail lights turned on.
• There are few streetlights on the road ahead.
● If any of the following conditions is met, the high beams will turn off automat-
ically:
• Vehicle speed is below approx imately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Vehicles ahead have their headlights or tail lights turned on.
• There are many streetlights on the road ahead.
■ Front sensor detection information
●The high beam may not be automatically turned off in the following situa-
tions:
• When vehicles ahead suddenly appear from a curve
• When the vehicle is cut in front of by another vehicle
• When vehicles ahead are hidden from sight due to repeated curv es, road
dividers or roadside trees
• When vehicles ahead appear from the faraway lane on wide road
• When vehicles ahead have no lights
● The high beam may be turned off if a vehicle ahead that is usin g fog lights
without using the headlights is detected.
● House lights, street lights, traffic signals, and illuminated billboards or signs
may cause the high beam to switch to the low beams, or the low beams to
remain on.
● The following factors may affect the amount of time taken to tu rn the high
beam on or off:
• The brightness of headlights, fog lights, and tail lights of v ehicles ahead
• The movement and direction of vehicles ahead
• When a vehicle ahead only has operational lights on one side
• When a vehicle ahead is a two-wheeled vehicle
• The condition of the road (gradient, curve, condition of the r oad surface,
etc.)
• The number of passengers and amount of luggage
● The high beam may be turned on or off when the driver does not expect it.
● Bicycles or similar objects may not be detected.

2494-5. Toyota Safety Sense C
4
Driving
PRIUS c_U●
In the situations shown below, the system may not be able to accurately
detect surrounding brightness levels. This may cause the low be ams to
remain on or the high beams to cause problems for pedestrians, vehicles
ahead or other parties. In these cases, manually switch between the high
and low beams.
• In bad weather (rain, snow, fog, sandstorms, etc.)
• The windshield is obscured by fog, mist, ice, dirt, etc.
• The windshield is cracked or damaged.
• The front sensor is deformed or dirty.
• The front sensor temperature is extremely high.
• Surrounding brightness levels are equal to those of headlights , tail lights
or fog lights.
• Vehicles ahead have headlights or tail lights that are either switched off,
dirty, are changing color, or are not aimed properly.
• When driving through an area of intermittently changing brightness and darkness.
• When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved
roads, gravel tracks, etc.).
• When frequently and repeatedly taking curves or driving on a w inding
road.
• There is a highly reflective object ahead of the vehicle, such as a sign or
a mirror.
• The back of a vehicle ahead is highly reflective, such as a co ntainer on a
truck.
• The vehicle’s headlights are damaged or dirty, or are not aime d properly.
• The vehicle is listing or titling due to a flat tire, a traile r being towed, etc.
• The high beam and low beam are repeatedly being switched betwe en in
an abnormal manner.
• The driver believes that the high beam may be causing problems or dis-
tress to other drivers or pedestrians nearby.