TOYOTA PRIUS PLUS 2013 Owners Manual
PRIUS PLUS 2013
TOYOTA
TOYOTA
https://www.carmanualsonline.info/img/14/60356/w960_60356-0.png
TOYOTA PRIUS PLUS 2013 Owners Manual
Trending: fuel filter, oil capacity, oil, low oil pressure, torque, USB, change time
Page 181 of 572
181 1-8. Safety information
1
Before driving
PRIUS +_OM_OM47841E_(EE)Remove the head restraint. (P. 1 1 2 )
Place the child restraint system
on the seat facing the rear of the
vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Keep the lap portion of the belt
tight.
Follow the directions given in the
child restraint system installation
manual and fix the child restraint
system securely in place.
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature), secure
the child restraint system using a
locking clip. (P. 188)
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely.
STEP 2
STEP 3
STEP 4
Page 182 of 572
182 1-8. Safety information
PRIUS +_OM_OM47841E_(EE)Forward-facing Child seat
Adjusting the angle of the seatback.
Second seats
While pulling the lever (either
[outside seats only] or ), fold
the seatback forward and then
back to the 1st lock position
(most upright position) until it
locks into place. Adjust the seat-
back to the 5th lock position.
1st lock position
5th lock position
Move the seat as far back as
possible.
Third seats
Adjust the second seat forward
so that it does not interfere with
the child restraint system.
While pulling the lever, fold the
seatback forward and then back
to the 1st lock position (most
upright position) until it locks into
place.
STEP 1
A
B
Page 183 of 572
183 1-8. Safety information
1
Before driving
PRIUS +_OM_OM47841E_(EE)Remove the head restraint. (P. 1 1 2 )
Place the child restraint system
on the seat facing the front of the
vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Keep the lap portion of the belt
tight.
Follow the directions given in the
child restraint system installation
manual and fix the child restraint
system securely in place.
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature), secure
the child restraint system using a
locking clip. (P. 188)
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely.
STEP 2
STEP 3
STEP 4
Page 184 of 572
184 1-8. Safety information
PRIUS +_OM_OM47841E_(EE)Junior seat
Adjusting the angle of the seatback.
Second seats
While pulling the lever (either
[outside seats only] or ), fold
the seatback forward and then
back to the 1st lock position
(most upright position) until it
locks into place. Adjust the seat-
back to the 5th lock position.
1st lock position
5th lock position
Move the seat as far back as
possible.
Third seats
Adjust the second seat forward
so that it does not interfere with
the child restraint system.
While pulling the lever, fold the
seatback forward and then back
to the 1st lock position (most
upright position) until it locks into
place.
STEP 1
A
B
Page 185 of 572
185 1-8. Safety information
1
Before driving
PRIUS +_OM_OM47841E_(EE)Place the child restraint system
on the seat facing the front of the
vehicle.
Sit the child in the child restraint
system. Fit the seat belt to the
child restraint system according
to the manufacturer’s instruc-
tions and insert the plate into the
buckle. Make sure that the belt is
not twisted.
Check that the shoulder belt is
correctly positioned over the
child’s shoulder, and that the lap
belt is as low as possible.
(P. 115)
STEP 2
STEP 3
Page 186 of 572
186 1-8. Safety information
PRIUS +_OM_OM47841E_(EE)
Removing a child restraint installed with a seat belt
Press the buckle release button
and fully retract the seat belt.
Installation with ISOFIX rigid anchor (ISOFIX child restraint sys-
tem) (second outside seats only)
Adjusting the angle of the seat-
back.
While pulling the lever (either
or ), fold the seatback forward
and then back to the 1st lock
position (most upright position)
until it locks into place. Adjust the
seatback to the 5th lock position.
1st lock position
5th lock position
Move the seat as far back as
possible.
STEP 1
A
B
Page 187 of 572
187 1-8. Safety information
1
Before driving
PRIUS +_OM_OM47841E_(EE)Open the fasteners on the lower
part of the seatback.
Check the positions of the exclu-
sive fixing bars, and install the
child restraint system to the seat.
The bars are installed in the
clearance between the seat cush-
ion and seatback.
If the child restraint system has a
top strap, the top strap should be
latched onto the anchors.
(P. 188)
STEP 2
STEP 3
Page 188 of 572
188 1-8. Safety information
PRIUS +_OM_OM47841E_(EE)
Child restraint systems with a top strap (second outside seats
only)
Latch the hook onto the anchor
bracket and tighten the top strap.
Make sure the top strap is
securely latched.
When installing a child restraint system without a lock-off
You need a locking clip to install the child restraint system. Follow the
instructions provided by the manufacturer of the system. If your child
restraint system does not provide a locking clip, you can purchase the fol-
lowing item from any authorized Toyota dealer or repairer, or another duly
qualified and equipped professional.
Locking clip for child restraint system
(Part No. 73119-22010)
Page 189 of 572

189 1-8. Safety information
1
Before driving
PRIUS +_OM_OM47841E_(EE)
CAUTION
When installing a child restraint system
Follow the directions given in the child restraint system installation manual
and fix the child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other
passengers may be seriously injured or even killed in the event of sudden
braking, sudden swerving or an accident.
If the driver’s seat interferes with the
child restraint system and prevents it
from being attached correctly, attach
the child restraint system to the right-
hand rear seat (left-hand drive vehicles)
or the left-hand rear seat (right-hand
drive vehicles).
Adjust the front passenger seat so that
it does not interfere with the child
restraint system.
When installing a forward-facing child
restraint system on the front passenger
seat, move the seat as far back as pos-
sible.
Failure to do so may result in death or
serious injury if the airbags deploy
(inflate).
Page 190 of 572
190 1-8. Safety information
PRIUS +_OM_OM47841E_(EE)
CAUTION
When installing a child restraint system
Never install a rear-facing child restraint
system on the front passenger seat
when the airbag manual on-off switch is
on. (P. 166)
The force of the rapid inflation of the
front passenger airbag can cause death
or serious injury to children in the event
of an accident.
There is a label(s) on the passenger
side sun visor, indicating it is forbidden
to attach a rear-facing child restraint
system to the front passenger seat.
Details of the label(s) are shown in the
illustration below.
Trending: oil type, tow, charging, oil change, stop start, radio antenna, lumbar support