ECU TOYOTA PRIUS PRIME 2021 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2021, Model line: PRIUS PRIME, Model: TOYOTA PRIUS PRIME 2021Pages: 68, PDF Size: 3.4 MB
Page 7 of 68

5
Open door warning
Fog light indicator4Malfunction/Check Engine
indicator1
Master warning light1
Low engine oil pressure warning1
Low tire pressure warning1
Low fuel level warning
Lane Tracing Assist (LTA)/Lane
Departure Alert (LDA) indicator
(green/orange
3)
Heated steering wheel indicator4
Intuitive Parking Assist indicator4
Fuel tank door position
Lane Tracing Assist (LTA)/
Lane Departure Alert (LDA)
with Steering Assist indicator
Lane Tracing Assist (LTA)/Lane
Departure Alert (LDA) Sway Control
indicator
High coolant temperature
warning1
Hybrid battery charge mode
indicator
Headlight low/high beam
indicator
Front and Rear Parking Assist with
Automated Braking OFF indicator1,2,4,5
Parking brake indicator
PWR MODE indicator
Pre-Collision System (PCS)
warning1,2
Rear passengers’ seat belt
reminder
“READY” indicator
Turn signal indicator
Vehicle Stability Control (VSC)
OFF indicator1
Shift position indicators
Steering control indicator
Intelligent Parking Assist (IPA)
indicator1,4
Smart Key system
Security indicator
Slip indicator/Hill-start Assist
Control indicator1,3
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
Full-Speed Dynamic Radar
Cruise Control (DRCC) indicator/
DRCC SET indicator
1
If the indicator does not turn off within a few seconds of starting the Hybrid system, there may be
a malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.5 Refer to section PKSB (Parking Support Braking function) in the Owner’s Manual.
Page 13 of 68

11 The Prius Prime may be charged immediately, or scheduled to charge at a
specific time. Before charging, it is recommended that:
• Parking brake is securely set
• All lights are turned off
• The POWER switch is OFF
Refer to “Things to Know Before Charging,” in the Owner’s Manual before
attempting to charge the hybrid battery.
Step 1 Plug the charge cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on
the outlet and charge cable plug.
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
Charging inlet light
Press and open
Store
START CHARGING
Make sure to hold the body of the plug and insert it
firmly into the outlet.
Check that the power indicator on the CCID (Charging
Circuit Interrupting Device) is illuminated.
Check the status of the automatic system check that
runs before charging to detect electrical leakage. If a
malfunction is
detected, an error warning indicator
flashes.
The surface of the CCID may become hot, but this
does not indicate a malfunction.
Step 2 Press the charge port lid to open and the charging inlet light will illuminate.
Remove the charging inlet cap and secure it as shown in the illustration.
NOTE: For vehicles with smart lid & connector locking system, unlock doors
first.
For more information or to change settings for the smart lid and charging connector
function, refer to the Owner’s Manual.
Charging
Page 14 of 68

12 Step 4 Insert the charge cable connector into the charge inlet.
- Do not press the latch release button when
inserting the connector.
- Align with the guide position shown on
underside of the charge connector, and
push it in until it clicks.
- Once a “click” sound is heard, check that
the charging connector is securely locked.
Step 5 Confirm that the charging indicator is illuminated. Press the charging
connector lock switch to lock the charging connector.
Refer to the Owner’s Manual for limitations and more details.
- Charging will not start if the charging indicator
does not illuminate when the charging connector
is inserted.
- The charging indicator will flash and not
start charging when the charging schedule is
registered.
Turn “Charge Now” on to temporarily cancel on
“Charge Schedule” screen or “Ending” screen.
- Vehicles with smart lid & connector locking
system*: The charging connector will be locked.
After the charging connector is locked, the
charging connector cannot be unlocked by
pressing the charging connector lock switch
if the electronic key is not in detection area of
charging port lid.
- The amount of time until charging is completed
can be checked on the energy monitor by
turning the POWER switch to ON mode.
- The charging indicator will turn off when
charging is completed.
* If equipped
ELECTRIC VEHICLE SYSTEM
4 5 " 3 5 $ ) " 3 ( * / ( $ 0 / 5 * / 6 &