warning TOYOTA PRIUS PRIME 2021 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2021, Model line: PRIUS PRIME, Model: TOYOTA PRIUS PRIME 2021Pages: 68, PDF Size: 3.4 MB
Page 6 of 68
4
Brake system warning1
Blind Spot Monitor (BSM) indicator4
Brake Override System/Drive-Start
Control/Front and Rear Parking Assist
with Automated Braking
5 indicator4
Brake system warning (yellow)1
Automatic High Beam (AHB)
indicator
OVERVIEW
Instrument cluster
For details, refer to “Warning lights and indicators,” Section 3, 2021 Owner’s
Manual.
ECO mode indicator
EV drive mode indicator
EV indicator
Electric power steering system warning
(red/yellow)1
EV auto mode indicator
Air bag SRS warning1
“AIR BAG ON/OFF” indicator1
Anti-lock Brake System (ABS)
warning1
Charging system warning1
Driver’s and front passenger’s seat
belt reminder (alarm will sound when the
power switch is “IGNITION ON” mode)
Clock
Main Display
Multi-Information Display (MID) Transmission shift position indicator
Constant speed cruise control
indicator/Constant speed
cruise control SET indicator
Service indicators and warning lights
Indicator symbols
Page 7 of 68
5
Open door warning
Fog light indicator4Malfunction/Check Engine
indicator1
Master warning light1
Low engine oil pressure warning1
Low tire pressure warning1
Low fuel level warning
Lane Tracing Assist (LTA)/Lane
Departure Alert (LDA) indicator
(green/orange
3)
Heated steering wheel indicator4
Intuitive Parking Assist indicator4
Fuel tank door position
Lane Tracing Assist (LTA)/
Lane Departure Alert (LDA)
with Steering Assist indicator
Lane Tracing Assist (LTA)/Lane
Departure Alert (LDA) Sway Control
indicator
High coolant temperature
warning1
Hybrid battery charge mode
indicator
Headlight low/high beam
indicator
Front and Rear Parking Assist with
Automated Braking OFF indicator1,2,4,5
Parking brake indicator
PWR MODE indicator
Pre-Collision System (PCS)
warning1,2
Rear passengers’ seat belt
reminder
“READY” indicator
Turn signal indicator
Vehicle Stability Control (VSC)
OFF indicator1
Shift position indicators
Steering control indicator
Intelligent Parking Assist (IPA)
indicator1,4
Smart Key system
Security indicator
Slip indicator/Hill-start Assist
Control indicator1,3
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
Full-Speed Dynamic Radar
Cruise Control (DRCC) indicator/
DRCC SET indicator
1
If the indicator does not turn off within a few seconds of starting the Hybrid system, there may be
a malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.5 Refer to section PKSB (Parking Support Braking function) in the Owner’s Manual.
Page 12 of 68
10 The Prius Prime system has features of both electric and hybrid vehicles. Electricity
received by charging from an external power source can be used to supplement
hybrid energy, and the vehicle can also be driven as an electric vehicle using only
the electric motor. The EV driving range can be extended by using regenerative
braking to store electricity in the traction battery.
ELECTRIC VEHICLE SYSTEM
Charging equipment
The charge cable included with the vehicle is designed to be connected only to
an AC 120V power source.
NOTE: Toyota recommends installing a heavier-duty 15-amp wall receptacle
with GFCI (Ground-Fault Circuit-Interrupter). Refer to the Owner’s Manual for more details.
Charging indicatorCharging connector lock switch*
* If equipped Hybrid battery
(traction battery) status indicator
Charging connector
Latch release button
CCID (Charging Circuit
Interrupting Device) Plug Charging inlet Charging inlet light
Charging port lid
Charging port
Charge cable
Charging port
Electric Vehicle System
Power indicator:
Illuminates when power is
flowing to the CCID.
Charging indicator:
Illuminates when charging is in
progress.
Error warning indicator:
Flashes when there is an
electrical leakage or when a
malfunction occurs in the CCID.
Page 13 of 68
11 The Prius Prime may be charged immediately, or scheduled to charge at a
specific time. Before charging, it is recommended that:
• Parking brake is securely set
• All lights are turned off
• The POWER switch is OFF
Refer to “Things to Know Before Charging,” in the Owner’s Manual before
attempting to charge the hybrid battery.
Step 1 Plug the charge cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on
the outlet and charge cable plug.
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
Charging inlet light
Press and open
Store
START CHARGING
Make sure to hold the body of the plug and insert it
firmly into the outlet.
Check that the power indicator on the CCID (Charging
Circuit Interrupting Device) is illuminated.
Check the status of the automatic system check that
runs before charging to detect electrical leakage. If a
malfunction is
detected, an error warning indicator
flashes.
The surface of the CCID may become hot, but this
does not indicate a malfunction.
Step 2 Press the charge port lid to open and the charging inlet light will illuminate.
Remove the charging inlet cap and secure it as shown in the illustration.
NOTE: For vehicles with smart lid & connector locking system, unlock doors
first.
For more information or to change settings for the smart lid and charging connector
function, refer to the Owner’s Manual.
Charging
Page 31 of 68
29
. 6 - 5 * * / ' 0 3 . " 5 * 0 / % * 4 1 - " : . * %
Push “ ” to change between the following information screens, “” to select,
“
” to switch contents and “” to go back.
Refer to the Owner’s Manual for more details.
Warning message display
Settings display Driving assist system information
Drive information
Clock setting display
Audio systemlinked display
Air conditioning system
settings screen Navigation systemlinked display
(if equipped)
Color Head-up display (HUD) (if equipped)
The color head-up display can display the current vehicle speed and hybrid system
indicator in front of the driver. Also, it can display various types of information to
assist the driver.
Refer to the Owner’s Manual for more details.
Meter control switches adjust
position and brightness of HUD Headup display (HUD) switch
activates or switches between items Vehicle speed display
Hybrid system current driving
and energy regeneration status
EV driving range indicates the
estimated distance
Insert display driving support
system information Cruise control display shows
Cruise control indicators
Route guidance display
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
Page 42 of 68
40
TOYOTA SAFETY SENSE™
Sensors
TSS 2.0 combines a forward-facing camera mounted in front of the inside rear view
mirror and a grille-mounted radar mounted in the front grille. These sensors support the
driver assist systems.
The Pre-Collision System uses a grille-mounted radar and forward-facing camera to
help detect a vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance
that this system can provide, do not overly rely on this system. This system will not
prevent collisions or lessen collision damage or injury in every situation. Do not use
PCS instead of normal braking operations under any circumstances. Do not attempt to
test the operation of the Pre-Collision System yourself, as the system may not operate
or engage, possibly leading to an accident. In some situations, such as when driving
in inclement weather such as heavy rain, fog, snow or a sandstorm or while driving
on a curve and for a few seconds after driving on a curve, a vehicle or pedestrian or
bicyclist may not be detected by the grille-mounted radar and forward-facing camera,
preventing the system from operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a buzzer
will sound and a warning message will be displayed on the Multi-Information Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional braking
force using Brake Assist. This system may prime the brakes and may apply greater
braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
Forwardfacing camera Grillemounted radar
Page 44 of 68
42
TOYOTA SAFETY SENSE™
CHANGING PRE-COLLISION ALERT TIMING
% * 4 " # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
1 S F T T “ ” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select “” and then press “.” The setting
screen is displayed.
1 S F T T i
” to select the desired setting. Each time it is pressed, the response to
the PCS warning timing changes as shown above.
Press “
” to go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
Press “
” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select “” and then press “.” The setting
screen is displayed.
1 S F T T i
w U P T F M F D U U I F E F T J S F E T F U U J O H 0 / 0 ' '
1 S F T T i
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON mode.
Refer to the Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
Far
Middle
(default)
Near
Page 45 of 68
43
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
LDA in TSS 2.0 uses a forward-facing camera designed to detect visible white and
yellow lane markers or road edge in front of the vehicle and the vehicle’s position
on the road. If the system determines that the vehicle is starting to unintentionally
deviate from its lane, the system alerts the driver with an audio and visual alert.
When the alerts occur, the driver must check the surrounding road situation and
carefully operate the steering wheel to move the vehicle back to the center part of
their lane.
- % " J T E F T J H O F E U P G V O D U J P O B U T Q F F E T P G B Q Q S P Y J N B U F M Z N Q I L N I
P S I J H I F S
on relatively straight roadways.
In addition to the alert function, LDA w/SA also features a steering assist
function. When enabled, if the system determines that the vehicle is on a path to
unintentionally depart from its lane, the system may provide small corrective steering
inputs to the steering wheel for a short period of time to help keep the vehicle in its
lane.
If the vehicle repeatedly deviates from the lane, the vehicle drifts within the lane due
to inattention, or the driver abruptly operates the steering wheel after an inattentive
period, when enabled, the vehicle sway warning function alerts the driver with an
audio and visual alert, urging them to take a break.
Lane Departure Alert with Steering Assist
(LDA w/SA)
5 6 3 / * / ( 5 ) & - % " 4 : 4 5 & . 0 / 0 ' '
Press the LDA switch to turn the LDA system on. Depress again to turn it off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
Page 47 of 68
45
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
" % + 6 4 5 * / ( - % " " - & 3 5 4 & / 4 * 5 * 7 * 5 :
DISABLING STEERING ASSIST
5 I F E S J W F S D B O B E K V T U U I F T F O T J U J W J U Z P G U I F - % " X B S O J O H
G V O D U J P O G S P N U I F
. V M U J * O G P S N B U J P O % J T Q M B Z . * %
D V T U P N J [ B U J P O T D S F F O
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
Press “
” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select the “” and then press “.” The setting
screen is displayed.
Press “
” U P T F M F D U U I F E F T J S F E T F U U J O H ) J H I / P S N B M
1 S F T T i
” to go back to the menu.
Press “
” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select the “” and then press “.” The setting
screen is displayed.
Press “
” U P T F M F D U U I F E F T J S F E T F U U J O H 0 / 0 ' '
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
4 8 " : 8 " 3 / * / ( 4 : 4 5 & .
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
Page 48 of 68
46
TOYOTA SAFETY SENSE™
Press “ ” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select the “” and then press “.” The setting
screen is displayed.
Press “
” to select the desired setting. Each time it is pressed, the response to
the sway warning timing changes.
1 S F T T i
” to go back to the menu.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
Press “
” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select the “” and then press “.” The setting
screen is displayed.
Press “
” U P T F M F D U U I F E F T J S F E T F U U J O H 0 / 0 ' '
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
" % + 6 4 5 * / ( 4 8 " : " - & 3 5 4 & / 4 * 5 * 7 * 5 :
% * 4 " # - * / ( - % " 4 8 " : 8 " 3 / * / ( " - & 3 5
When enabled, the LTA system’s lane centering function is designed to
automatically provide assistance to help keep the vehicle in the center of the lane
when Full-Speed Range DRCC is set.
Lane Tracing Assist (LTA)