headlight TOYOTA RAIZE 2023 User Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2023, Model line: RAIZE, Model: TOYOTA RAIZE 2023Pages: 516, PDF Size: 44.62 MB
Page 202 of 516

2004-3. Operating the lights and windshield wipers
RAIZE_OM_General_BZ358E
✽: If equipped
⬛Automatic light off system
⚫While the lights are turned on, changi ng the engine switch from “ON” to
“ACC” or “OFF” will automatically turn off the lit lights.
⚫To turn the lights on again, turn “ON” the engine switch or move the head-
light switch to the position, and then move it to the or
position.
⬛Automatic light-off warning buzzer
When the headlights and tail lights are tu rned on with the engine switch set to
“ACC” or “OFF”, opening the driver’s door will cause the warning buzzer to
sound, letting the driver know that the lights have not been turned off.
⚫When the buzzer sounds , the warning message also appears for vehicles
with TFT color multi-information display. ( ➞P. 391)
⬛Power saving function
To prevent the battery from discharging, when the engine switch is set in “ACC”
or “OFF” and the headlights or tail lig hts are on, the power saving function is
activated and all lights are automatically turned off after about 10 minutes.
After light has been automatically turn ed off, perform any of the following
operations to cancel the power saving state and turn the lights back on.
⚫
When the engine switch is set to “ON”
⚫When the headlight switch is operated (However, the lights will turn off again
automatically after about 10 minutes)
⚫When one of the doors is opened or cl osed (However, the lights will automati-
cally turn off again after about 10 minutes)
⬛Customizations✽
You can change the timing of the headlight switch turning on and off automat-
ically at the position, etc.
(List of customizable features: ➞ P. 430)
NOTICE
⬛To prevent battery discharge
Do not leave the lights on for a long ti me with the engine stopped. Also, be
sure to turn off the lights when you leave the vehicle.
RAIZE_OM_General_BZ358E.book 200 ページ 2022年5月17日 火曜日 午後1時59分
Page 204 of 516

2024-3. Operating the lights and windshield wipers
RAIZE_OM_General_BZ358E
⬛Lighting conditions
▶Vehicles with front fog light switch
The headlights or the front po sition lights are turned on.
▶Vehicles with front and rear fog light switch
Front fog lights: The headlights or the front position lights are turned on.
Rear fog light: The front fog lights are turned on.
▶Vehicles with rear fog light switch
The headlights are turned on.
RAIZE_OM_General_BZ358E.book 202 ページ 2022年5月17日 火曜日 午後1時59分
Page 231 of 516

2294-5. Using the driving support systems
RAIZE_OM_General_BZ358E
Driving
4
⚫The projection range may be different depending on the vehicle and
road conditions.
⚫The projection range of the rear-view camera is limited. The camera
does not capture items located near both edges of the bumper or those
located under the bumper.
⚫Since the rear-view camera uses a special lens, the distance in the cam-
era view is different from the actual distance.
⚫The colors of the rear-view camera image may appear different from the
actual colors.
⚫Anything placed above the rear-view camera may not appear on the
monitor.
⬛Camera
The rear-view camera is installed at
the following location.
⚫Camera maintenance and care
If foreign objects, such as water dr oplets, snow, or dirt, are attached to
the camera, you cannot see a clear image. In this case, wash out dirt
from the camera with water, and wipe it off with a soft cloth dampened
with water. For persistent stains, wash it off with neutral detergent.
⚫The following situations may make it diff icult to view the screen, but they are
not the sign of malfunction.
⦁ Dark places (such as at night)
⦁ When the temperature near the lens is high or low
⦁ When water droplets are attached to th e rear-view camera or the humidity is
high (such as during rain)
⦁ When foreign objects (including dirt) are attached near the rear-view camera
⦁ When the sunlight or the headlight be am has directly shined on the lens of
the rear-view camera
KBRO460404
RAIZE_OM_General_BZ358E.book 229 ページ 2022年5月17日 火曜日 午後1時59分
Page 288 of 516

2866-1. Maintenance and care
RAIZE_OM_General_BZ358E
WARNING
✽: If equipped
⬛Exhaust pipes
Exhaust gases cause the exhaust pipes to become quite hot. When washing
the vehicle, be careful not to touch the hot exhaust pipes until they have
cooled sufficiently. Doing so may cause burns.
⬛Precautions regarding the headlight lens
Do not touch the headlight lens when turning on the light and immediately
after turning off the light. The head light lens become hot and may cause
burns.
⬛Blind Spot Monitor✽
Scratches on the rear bumper paint may prevent the system from working
normally. Contact your Toyota dealer.
⬛Waxing the aluminum wheels✽
Be careful not to have wax attached to the seat of the nut. It could loosen the
nut and cause the tire to come off, which may lead to an unforeseen accident.
It may also lead to excessive tighteni ng, causing the nuts and bolts to break or
the wheels to get damaged.
NOTICE
⬛To prevent paint deterioration and co rrosion on the body and components
(wheels, etc.)
⚫Wash the vehicle immediately in the following cases:
⦁ After driving near the sea coast
⦁ After driving on roads where the antifreezing agents are spread on
⦁ If coal tar or tree sap is present on the paint surface
⦁ If dead insects, insect droppings or bird droppings are present on the
paint surface
⦁ After driving in an area contaminated wi th soot, oily smoke, mine dust, iron
powder or chemical substances
⦁ If the vehicle becomes heavily soiled with dust or mud
⦁ If any organic solvent such as benzene or gasoline is spilled on the paint
surface
⚫If the paint is chipped or scrat ched, have it repaired immediately.
⚫To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
RAIZE_OM_General_BZ358E.book 286 ページ 2022年5月17日 火曜日 午後1時59分
Page 354 of 516

3526-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E✽
: If equipped
Replacing light bulbs
You can replace the bulbs listed below yourself. The difficulty of
replacing bulbs depends on the bulb. We recommend that you
replace the parts at your Toyota dealer because they may get dam-
aged.
Preparing light bulbs
Check the W (wattage) of the defective light bulb. ( ➞P. 428)
Bulb position
⬛Front
a Front turn signal/emergency flashers (vehicles with halogen head-
lights)
b Front fog lights
✽
cFront position lights (vehicles with halogen headlights)
d Headlight low beam (vehicles with halogen headlights)
e Headlight high beam (vehicles with halogen headlights)
12345KBRO620815E
RAIZE_OM_General_BZ358E.book 352 ページ 2022年5月17日 火曜日 午後1時59分
Page 356 of 516

3546-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Bulb replacement procedure
▶Vehicles with halogen headlights
Open the hood before you work on th e headlights, front position lights, or
front turn signal/emergency flashers.
⬛Headlight low beam/high beam (v ehicles with halogen headlights)
a Open the hood, and rotate the
socket to remove it
aLow beam (outside)
b High beam (inside)
b Hold down the claw and remove
the light bulb
12
KBRO620816N
KBRO620817N
RAIZE_OM_General_BZ358E.book 354 ページ 2022年5月17日 火曜日 午後1時59分
Page 357 of 516

3556-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
cReplace and attach the light bulb
Align the light bulb’s claws (3 locations)
to the mounted area, insert it and
secure it in place.
aLow beam (outside)
b High beam (inside)
d Attach the socket
After attaching the socket, turn on the
headlights and make sure there is no
light leaking out.
12
KBRO620818N
KBRO620819N
RAIZE_OM_General_BZ358E.book 355 ページ 2022年5月17日 火曜日 午後1時59分
Page 358 of 516

3566-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
⬛Front turn signal/emergency flashers (vehicles with halogen
headlights)
a Open the hood, and rotate the
socket to remove it
b Remove the light bulb
c Attach the new light bulb, rotate
the socket and set it in place
KBRO620820N
KBRO620821N
KBRO620822N
RAIZE_OM_General_BZ358E.book 356 ページ 2022年5月17日 火曜日 午後1時59分
Page 359 of 516

3576-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
⬛Front position lights (vehicles with halogen headlights)
a Open the hood, and rotate the
socket to remove it
b Remove the light bulb
c Attach the new light bulb, rotate
the socket and set it in place
KBRO620823N
KBRO620824N
KBRO620825N
RAIZE_OM_General_BZ358E.book 357 ページ 2022年5月17日 火曜日 午後1時59分
Page 365 of 516

3636-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E✽
: If equipped
Maintenance and care
6
⬛Other light bulbs
If any other light bulbs go out, replace them at your Toyota dealer.
⚫Headlight high beam/low beam (vehicles with LED headlights)
⚫Daytime running lights✽
⚫Front position lights (vehicles with LED headlights)
⚫Front turn signal/emergency flashe rs (vehicles with LED headlights)
⚫Side turn signal lights/emergency flashers
⚫Stop lights/tail lights
⚫High mounted stoplight
⚫Rear fog light✽
⬛LED lights
Each unit of LED headlights,
✽ daytime running lights✽, and high mounted stop-
light are made of several LEDs. If any one of the LEDs do not light up, replace it
at your Toyota dealer.
⬛When replacing the front fog lights✽
Remove the retaining clips of the fender liner and replace the light bulb. After
replacement, be sure to hold the fender liner with the clips and secure it in
place.
⚫When you remove the clip, use a
tool such as a flathead screwdriver
to pull out the center of the clip ( a)
and take the clip off ( b).
To prevent damage, wrap a cloth
around the tip of the flathead screw-
driver or the like to protect it.
⚫When you attach the clip, insert the
clip ( a) and push down the center
part ( b).
12
KBGR620838
12
KBGR620839
RAIZE_OM_General_BZ358E.book 363 ページ 2022年5月17日 火曜日 午後1時59分