tow bar TOYOTA RAIZE 2023 Owners Manual

3757-2. Steps to take in an emergency
RAIZE_OM_General_BZ358E
When trouble arises
7
Emergency towing procedure
To have your vehicle towed by another vehicle, the towing eyelet must be
installed to your vehicle. Install the towing eyelet using the following procedure.
aTake out the wheel nut wrench and towing eyelet (➞ P. 397)
b Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
cInsert the towing eyelet into the
hole and tighten partially by
hand.
d Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
e Securely attach cables or ch ains to the towing eyelet.
Take care not to damage the vehicle body.
fEnter the vehicle being towed and start the engine.
If the engine does not start, turn the engine switch to “ON”.
gShift the shift lever to N and release the parking brake.
When the shift lever cannot be shif ted (continuously variable transmis-
sion): ➞P. 191
KBRO720106E
KBRO720108TN
KBRO720109TN
RAIZE_OM_General_BZ358E.book 375 ページ ２０２２年５月１７日　火曜日　午後１時５９分