4WD TOYOTA RAV4 1996 Service Repair Manual

SF0RG−02
S01838
2WD
SST
P01630
Ohmmeter
− SFIKNOCK SENSOR
SF−57
1996 RAV4 (RM447U)
INSPECTION
1. 4WD:
REMOVE ENGINE AND TRANSAXLE ASSEMBLY (See
page EM−68)
2. REMOVE KNOCK SENSOR
(a) Disconnect the knock sensor connector.
(b) Using SST, remove the knock sensor.
SST 09816−30010
Torque: 44 N·m (450 kgf·cm, 33 ft·lbf)
3. INSPECT KNOCK SENSOR
Using an ohmmeter, check that there is no continuity between
the terminal and body.
If there is continuity, replace the sensor.
4. REINSTALL KNOCK SENSOR
Installation is in the reverse order of removal.
5. 4WD:
REINSTALL ENGINE AND TRANSAXLE ASSEMBLY
(See page EM−74)