reset TOYOTA RAV4 2007 XA30 / 3.G Owner's Manual

’07 Rav4_U (L/O 0701)
262
2007 RAV4 from Dec. ’06 Prod. (OM42662U)
If the cellular phone is not registered, this
system cannot be used. See page 242 for
registering a cellular phone. Make sure
that [BT] is displayed and get the cellular
phone ready to use.
There are 3 ways to make a phone call
with this system.
Speed dial
A phone call can be made with a preset
button in which a phone number is regis-
tered. See page 258 for setting the preset
buttons.
Dial by Name
The system dials the numbers correspond-
ing to the spoken names registered in the
system.
Dial by Number
The system dials to the spoken numbers.
To make a phone call
Push the off −hook switch to turn the
hands −free system on. To speed dial
1. Push the preset button where the de- sired number is set. The name or tele-
phone number is displayed.
2. Push the off −hook switch to dial.
To dial by Name 1. Push the talk switch and say [Dial by name].
[Dial by name. Please push the talk
switch and say the stored name, or say
list names.] is heard and [Dial by Name]
is displayed.
2. Push the talk switch and say the phone name, or turn the “AUDIO CON-
TROL” knob until the name that you
want to dial is displayed and push the
knob. When using a voice command:
[XXXX (phone number) Push the off
−hook
switch to dial. Otherwise, push the talk
switch and say dial, or go back.] is heard.
After that, do the one of the following:
Push the off −hook switch.
Push the talk switch and say [Dial].
Turn the “AUDIO CONTROL” knob until
[Dial] is displayed and push the knob.
When using the knob:
It calls the number.
The system may not function in the follow-
ing cases:
If there is no number registered in the
preset button.
If the system does not recognize the
voice command.
—Making a phone call

’07 Rav4_U (L/O 0701)
286
2007 RAV4 from Dec. ’06 Prod. (OM42662U)
Manual air conditioning system
Automatic air conditioning system
To reset the hour: Push the “H” button.
To reset the minutes: Push the “M” button.
If quick adjustment to a full hour is de-
sired, push the “:00” button.
For example, if the “:00” button is de-
pressed when the time is between
1:01—1:29, the time will change to 1:00.
If the time is between 1:30—1:59, the
time will change to 2:00.
The key must be in the “ACC” or “ON”
position.
If the electrical power source has been
disconnected from the clock, the time dis-
play will automatically be set to 1:00 (one
o’clock).
Instrument panel
Rear console box
ClockPower outlets (12 VDC)