headlights TOYOTA RAV4 2017 XA40 / 4.G Quick Reference Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2017, Model line: RAV4, Model: TOYOTA RAV4 2017 XA40 / 4.GPages: 51, PDF Size: 3.61 MB
Page 4 of 51

2
OVERVIEW
Instrument panel
Steering wheel controls
Audio control switches1,2
Voice command switch2
Paddle shift switches1
Tilt and telescopic steering lock release lever
Multi-Information Display (MID) controls2,3
Dynamic Radar Cruise Control (DRCC) vehicle-to-vehicle distance button
Dynamic Radar Cruise Control (DRCC) or Cruise control switch
Wiper and washer controls
Instrument cluster
Headlights, turn signals, fog lights and Automatic High Beam (AHB) controls
Fuel tank door release lever
Hood lock release leverPower Liftgate main switch1
Instrument panel light control dial
Outside rear viewmirror switches
Heated steering wheel switch1
All-Wheel Drive lockswitch (AWD models)1
Lane Departure Alert (LDA) switch
Tire Pressure Monitoring (warning)System (TPMS) reset switch1
106464_2017_RAV4_QRG_D5_R1.indd 29/22/16 8:02 AM
Page 11 of 51

9
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Windshield and rear window washer fluid tank
Engine coolant reservoirEngine oil filler capEngine oil level dipstick
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer to the
“Warranty & Maintenance Guide.”
+
-
With the dial turned fully up, instrument panel lights will not dim when the headlights
are turned ON.
Brightness control
Light control-Instrument cluster
Engine maintenance
106464_2017_RAV4_QRG_D5_R1.indd 99/22/16 8:12 AM
Page 13 of 51

11
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Tilt & telescopic steering wheel
Lights & turn signals
Parking brake
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Length
Lock release leverAngle
Pull
(2) Push
(1) Pull slightly(3) Lower
SetRelease
Daytime Running Light system (DRL)
Automatically turns on the headlights at a reduced intensity.
Automatic On/Off1
The side marker, parking, tail, license plate, instrument panel and headlights turn
on and off automatically
Automatic Off1
Automatically turns lights off after a delay of 30 seconds, or when the lock switch
on remote is pushed after all the doors are locked.
Automatic High Beam
Designed to automatically turn on or off high beams as necessary.
1 If equipped.
Type A
Type C
Type B
HEADLIGHTS
Parking lights
Parking lights
Low beam
High beam flasher
Highbeam
Auto
DRL ON
Headlights
Headlights
DRL OFF
Parking lights
DRL ON
Headlights
OFF
106464_2017_RAV4_QRG_D5_R1.indd 119/22/16 8:13 AM
Page 14 of 51

12
Windshield wipers & washers
FEATURES & OPERATIONS
Front fog lights come on only when the headlights are on low beam.
Turn
FRONT
REAR
1 Intermittent windshield wiper frequency adjustment Rotate to increase/decrease wipe frequency.
Intermittent
Pull to wash and wipe
Adjust frequency1
Interval wipe
Slow
Fast
Mist
Wash and wipe
Wipe
Interval wipe
1 The right hand signals will flash three times.2 The left hand signals will flash three times.
Right turn
Lane change1
Lane change2
Left turn
p 221
FRONT FOG LIGHTS (IF EQUIPPED)
TURN SIGNALS
106464_2017_RAV4_QRG_D5_R1.indd 129/22/16 8:13 AM
Page 28 of 51

26
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear view mirror
and a millimeter-wave radar mounted in the front grill. These sensors support the
driver assist systems.
Camera sensorRadar sensor
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ P (TSS-P) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic situations, in
certain conditions. TSS-P is designed to help support the driver’s awareness,
decision making and vehicle operation contributing to a safe driving experience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
Lane Departure Alert with Steering Assist function (LDA w/SA) LDA w/SA is designed to provide notification when the system detects an unintended lane departure.
The Steering Assist function is designed to provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane.
Automatic High Beams (AHB)AHB is designed to detect the headlights of oncoming vehicles and the tail lights of preceding vehicles and switch between high beams and low beams as appropriate.
Pre-Collision System with Pedestrian Detection function (PCS w/PD)PCS w/PD is designed to provide alert, mitigation, and/or avoidance support in certain conditions, when the system detects a potential collision with a preceding vehicle is likely to occur.
Advanced millimeter-wave radar sensor system is designed
to work with the camera sensor to help recognize a preceding
pedestrian, and provide an alert, mitigation and/or avoidance
support in certain conditions.
Dynamic Radar Cruise Control (DRCC) DRCC is designed to help maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed.
106464_2017_RAV4_QRG_D5_R1.indd 269/22/16 10:53 AM
Page 37 of 51

35
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Automatic High Beams (AHB)
(1) With the engine switch in IGNITION ON mode and headlight switch turned to
“AUTO” position, push lever away from you.
The “” indicator will come on when the headlights are turned on
automatically to indicate that the system is active.
(2) Pull the lever back toward you to turn the AHB system off.
The “” will turn off and the “” turns on.
When all of these conditions are met, high beams will be automatically turned on
(after approximately 1 second):
• Vehicle speed is above approximately 25 mph (40 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights
turned on.
• There are few street lights on the road ahead.
If any of these conditions occur, the system is designed to automatically turn off
high beams:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights
turned on.
• There are many streetlights on the road ahead.
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
AHB is a safety system designed to help drivers see more of what’s ahead at
nighttime without dazzling other drivers. When enabled, AHB uses an in-vehicle
camera to help detect the headlights of oncoming vehicles and tail lights of
preceding vehicles, then automatically switches between high and low beams
as appropriate to provide the most light possible and enhance forward visibility.
By using high beams more frequently, the system may allow earlier detection of
pedestrians and obstacles.
Refer to a Toyota Owner’s Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
106464_2017_RAV4_QRG_D5_R1.indd 359/22/16 8:38 AM