steering wheel TOYOTA RAV4 2021 Owners Manual (in English)

1
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
INDEX
Engine maintenance 11
Fuel tank door release & cap 10
Hood release 10
Indicator symbols 6-7
Instrument cluster 5
Instrument panel 2-4
Instrument panel light control 11
Keyless entry
1 8-9
Smart Key system1 9
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructio\
ns and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONS FEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ (TSS 2.0)
Air conditioning/heating 19
Audio
23
Auto lock/unlock
1 12
Automatic transmission 12
Bird’s Eye View Camera
with Perimeter Scan 30
Blind Spot Monitor with Rear
Cross Traffic Alert (BSM w/RCTA) 31
Clock 20
Cup holders 26
Door locks 14
Downhill assist control system 37
Driving mode select 34
Electric parking brake 13
Front and Rear Parking Assist
with Automated Braking Braking
(PA w/AB) 32
Garage door opener (Homelink
®)3 28
Heated steering wheel 22
Heated/ventilated seats 22
Intuitive Parking Assist 33
Lights
1,2 & turn signals1 16-17
Moonroof 20
Multi-Information Display (MID)
2 25
Multi-terrain select 36
Panoramic moonroof 21
Power outlets-12V DC 26
Power outlets- 120V AC
26
Power windows 17
Qi wireless charger 27
Rear door-Power Liftgate 18
Rear view monitor system 30
Seat adjustments-Front 15 Seat adjustments-Rear 15
Seats-Head restraints
15
Snow mode swtich (AWD vehicles) 35
Steering lock release 14
Steering wheel switches &
telephone controls (Bluetooth
®) 24
Stop & Start system 29
Tilt & telescopic steering wheel 14
USB charge ports 27
USB media port 23
Vehicle Stability Control (VSC)/
TRAC/Trailer sway control
OFF switch 37
Windshield wipers & washers 17
Automatic High Beams (AHB) 53
Full-Speed Range Dynamic Radar
Cruise Control (DRCC) 50-52
Lane Departure Alert with Steering
Assist (LDA w/SA) 42-45
Lane Tracing Assist (LTA) 46-49
Pre-Collision System with Pedestrian
Detection (PCS w/PD) 39-41
Quick overview-
Toyota Safety Sense
™ 2.0
(TSS 2.0) 38
Road Sign Assist (RSA) 54
Sensors 39
BLUETOOTH® DEVICE
PAIRING SECTION 62-64
Floor mat installation
60
Rear door child safety locks 55
Safety Connect
® 58
Seat belts 55
Seat belts-Shoulder belt anchor 55
Spare tire & tools 56
Star Safety System
TM 59-60
Tire Pressure Monitoring
(warning) System (TPMS) 57

2
OVERVIEWInstrument panel
Steering wheel controls
Audio volume
control switch2
Telephone switch2
Voice
command switch2
Tilt and telescopic steering
lock release lever (below
the steering wheel)
Ignition switch
Audio control switches2
LTA (Lane Tracing Assist)/Lane Departure
Alert with Steering Assist (LDA w/SA) switch
Meter control
switches
Hood lock release lever
Headlight/turn signal/fog light
1 control
Fuel tank door release lever
Power Liftgate main switch
1
Bird’s Eye View Camera
ON/OFF switch1,2
Windshield de-icer
switch1
Instrument panel
light control dial
Automatic High Beams
(AHB) switch
Heated steering wheel switch
1
Windshield wiper and washer control Meters
Multi-Information Display (MID)
Full-Speed Range Dynamic Radar
Cruise Control (DRCC) vehicle-to-
vehicle distance switch
Full-Speed Range
Dynamic Radar Cruise
Control (DRCC) switch

14
Smart KeyWithout Smart Key
Steering lock release
Push
Turn
Turn
Turn
When the steering lock cannot be
released, “Push Engine Switch while
Turning Steering Wheel in Either
Direction” will be displayed on the
Multi-Information Display.
Check that the shift lever is set in P.
Press the power button shortly and
firmly while turning the steering wheel
left and right. When starting the engine, the engine
switch may seem stuck in OFF. To free
it, turn the key while turning the steering
wheel slightly left and right.
Unlock
Lock
Door locks
Tilt & telescopic steering wheel
Hold wheel, push lever down, set angle and length, and return lever.

NOTE: Do not attempt to adjust while the vehicle is in motion.
Length
Lock release lever Angle
FEATURES & OPERATIONS

22
FEATURES & OPERATIONSHeated/ventilated seats
(if equipped)
FrontRear
The vehicle must be on for use.
Refer to the Owner’s Manual for more details.
Yellow - heated seat on
Green - ventilated seat on
Level indicators:
HEATED/VENTILATED (IF EQUIPPED)
HEATED ONLY (IF EQUIPPED)
Driver’s seat
HeatedHeated
VentilatedVentilated
Passenger’s seat
The vehicle must be on for use.
Heated steering wheel (if equipped)

24
Microphone
FEATURES & OPERATIONS
Bluetooth® technology allows dialing or receipt of calls without removing your han\
ds
from the steering wheel.
Refer to the Bluetooth
® device pairing in this guide or the Navigation and
Multimedia System Owner’s Manual for additional user instructions.
NOTE: Always use safe driving practices and follow all traffic rules.
Return to previous
screen
Volume control
Voice command
switch
Start and end call
“MODE”
Push to change audio mode.
Push and hold to mute or
pause the audio.
“ ”
Use to search within the
selected audio feature.
Steering wheel switches
& telephone controls (Bluetooth®)

38
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 2.0 (TSS 2.0) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic si\
tuations, in
certain conditions. TSS 2.0 is designed to help support the driver’s \
awareness,
decision making and vehicle operation contributing to a safe driving exp\
erience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense.
Quick overview-Toyota Safety Sense™ 2.0
Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced grille-mounted radar system is designed to work with
the forward-facing camera to help recognize a preceding pedestrian or
bicyclist, and provide an alert, mitigation and/or avoidance support in \
certain conditions.
Lane Departure Alert with Steering Assist (LDA w/SA)
LDA w/SA is designed to provide notification when the system detects
an unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help\

keep the vehicle in its lane.
The Sway Warning function is designed to detect vehicle swaying
(based on the vehicle location and steering wheel operation) and alert
the driver with an audio and visual alert, urging them to take a break.
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and
the tail lights of preceding vehicles and switch between high beams
and low beams as appropriate.
Road Sign Assist (RSA)
RSA is designed to recognize specific road signs using the forward-
facing camera to provide information to the driver via the display.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
Full-Speed Range DRCC is designed to help maintain a pre-set
distance to a preceding vehicle when the preceding vehicle is traveling \
at a lower speed. The minimum set speed is approximately 20 MPH,
but once activated, the operating speed range is 0-110 MPH.
Lane Tracing Assist (LTA)
LTA contains all the features of LDA described above and additionally
is designed to help keep the vehicle in the center of a lane by assistin\
g
the driver in steering control when using Full-Speed Range DRCC.

43
LANE DEPARTURE ALERT
LDA function display(2)
(1)
Lane Departure Alert (LDA) indicator flashes orange when operating.
The LDA function
displays when the Multi-Information Display (MID) is switched
to the driving assist system information screen.
(1) The system displays solid white lines on the LDA indicator when visible lane markers or the road are detected. A side flashes orange to alert the dri\
ver when
the vehicle deviates from its lane.
(2) The system displays outlines on the LDA indicator when lane markers or the road are not detected or the function is temporarily canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LDA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Operation display
of steering wheel
operation support LDA indicator
Lane markers/road edge

45
SWAY WARNING SYSTEM
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LDA SWAY WARNING ALERT
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
display in
the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
(1) Press “ ” switches and select “” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LDA” and then press “.” The setting
screen is displayed.
(3) Press “
” switches and select the “Sway Sensitivity” setting function and
then press “
” to select the desired setting.
(4) Press “
” to go back to the menu.
Refer to the Toyota Owner’s Manual for additional information on LDA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it. (1) Press “
” switches and select “” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LDA” and then press “.” The setting
screen is displayed.
(3) Press “
” switches and select the “Sway Warning” setting function and then
press “
” to select the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.

47
LANE TRACING ASSIST
The LTA function displays when the Multi-Information Display (MID) is switched to
the driving assist system information screen.
(1) The system displays solid white lines on the LTA indicator when visible lane markers on the road are detected. A side flashes orange to alert the dri\
ver when
the vehicle deviates from its lane.
(2) The system displays outlines on the LTA indicator when lane markers on the road are not detected or the function is temporarily canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LTA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LTA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
LTA function display
Operation display
of steering wheel
operation support Follow-up
cruising display
LTA indicator
Lane markers
(2)
(1)
Lane Tracing Assist (LTA) indicator flashes orange when operating.

49
LANE CENTERING
The lane centering function is linked with Full-Speed Range Dynamic Rada\
r Cruise
Control (DRCC) and provides the required assistance by operating the steering
wheel to keep the vehicle in its current lane.
When dynamic radar cruise control with full-speed range is not operating, the lane
centering function does not operate.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
(1) Press “ ” switches and select “” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press “.” The setting
screen is displayed.
(3) Press “
” switches and select the “Lane Center” setting function and then
press “
” to select the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LTA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
DISABLING LANE CENTERING FUNCTION