Grease fitting location TOYOTA SEQUOIA 2001 Service Repair Manual

R04428
F19333
SPIDER GREASE FITTING ASSEMBLY DIRECTION
FOR 4WD REAR PROPELLER SHAFT
No. 3
No. 4Sleeve YokeNo. 4
Sleeve Yoke
No. 3
Fill up the No. 3, 4 and sleeve yoke grease fittings with MP grease.The figure on the left shows the locations
of the grease fittings from the front.
± PROPELLER SHAFTSPIDER BEARING
PR±13
2996 Author: Date:
2005 SEQUOIA (RM1146U)
7. CHECK SPIDER BEARING
(a) Check that the spider bearing moves smoothly.
(b) Check the spider bearing axial play.
Maximum bearing axial play: 0.05 mm (0.0020 in.)
HINT:

Install new spider bearings on the flange side in the pro-
cedure described above.

When replacing the rear propeller shaft spider on 4WD
vehicle, be sure that the grease fitting assembly hole is
facing in the direction shown in the illustration below.