roof TOYOTA SEQUOIA 2003 1.G User Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2003, Model line: SEQUOIA, Model: TOYOTA SEQUOIA 2003 1.GPages: 403, PDF Size: 8.28 MB
Page 127 of 403

03_SEQUOIA_U (L/O 0301)
121
2003 SEQUOIA from Jan. ’03 Prod. (OM34422U)
To turn on the personal light, push the
switch. To turn the light off, push the
switch once again.Without electric moon roof
With electric moon roof
CENTER INTERIOR LIGHT
To turn on the interior light, slide the
switch.
The interior light switch has the following
positions:
“ON”—Keeps the light on all the time.
“OFF”—Turns the light off.
“DOOR”—Turns the light on when any of
the side doors is opened. The light re-
mains on when all the side doors are
closed.
ILLUMINATED ENTRY SYSTEM
When the switch is in the “DOOR” posi-
tion and any of the side doors is opened,
the light will come on. After all the side
doors are closed, the light remains on for
a certain time before fading out.
However, in the following cases, the light
goes out immediately:
All the side doors are closed when the
ignition key is in “ACC” or “ON” posi-
tion.
The ignition key is turned to “ACC”,
“ON” or “START” after all the side
doors are closed.
All the doors are locked when the light
is still on.
Personal lightsCenter interior and personal
lights
Page 257 of 403

03_SEQUOIA_U (L/O 0301)
251
2003 SEQUOIA from Jan. ’03 Prod. (OM34422U)
“AUTO” button
For automatic operation of the rear air
conditioning, press the “AUTO” button. An
indicator light will illuminate to show that
the automatic operation mode has been
selected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed and air flow according to the tem-
perature.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, press
the “OFF” button.
Fan speed selector
Select the mode button you desire to ad-
just the fan speed and push it.
In automatic operation, the fan speed is
adjusted automatically unless you desire
another fan speed mode.Temperature selector
To increase the temperature, press the
“
” side, to decrease it, press the “ ”
side.
The temperature display changes between
“ C” and “ F” when the unit of the outside
temperature display is changed. (For de-
tails, see “Multi information display” on
page 254 in Section 1 9.)
“REAR” button
You can turn on or off the rear air condi-
tioning system by pushing the button.
“FRT+RR” button
You can cancel the operations from the
rear control panel by pushing this button.
While the operation from the rear control
panel are stopped, the front and rear air
conditioning systems can be set simulta-
neously from the front control panel.
“OFF” button
Push the “OFF” button to turn off the air
conditioning system.
Air flow selector
Push the button to select the vents used
for air flow.
1. Panel— Air flows mainly from the roof
panel vents.
2. Bi level— Air flows from both the roof
panel vents and floor vents.
3. Floor— Air flows mainly from the floor
vents.