TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual SIENNA 2008 XL20 / 2.G TOYOTA TOYOTA https://www.carmanualsonline.info/img/14/6798/w960_6798-0.png TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual
Trending: engine oil capacity, check transmission fluid, roof, headlight aiming, fuse box, change language, warning light

Page 211 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
203
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Engine (ignition) switch, Transmission and Parking
brake
Engine (ignition) switch204
. . .

Page 212 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
204
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
“START”—Starter motor on. The key
will return to the “ON” position when
released.
For starting tips, see page 451 in S

Page 213 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
205
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Your automatic transmission has a shift
lock system to minimize the possibility of
incorrect operation. This means you can
only

Page 214 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
206
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
(b) Normal driving1. Start the engine as  instructed  in “How to start the engine” on page 452 in
Section 3. The transmissio

Page 215 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
207
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Vehicles with cruise control or dynamic
laser cruise control—When the cruise con-
trol is being used, even if you downshift
fr

Page 216 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
208
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
(e) Backing up1. Bring the vehicle to a complete stop.
2. With the brake pedal held down with your foot, shift the selector leve

Page 217 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
209
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
The traction control system automatical-
ly helps prevent the spinning of front
wheels when the vehicle is started or
accelerate

Page 218 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
210
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
TRACTION CONTROL OFF MODE
If your wheels get stuck in a ditch
when you are driving on a severe off
road and sand, turn off the t

Page 219 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
211
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
In the following cases, contact your Toyota
dealer:
The warning light does not  come on
after the engine switch is turned to

Page 220 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
212
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
When the traction control system is oper-
ating, the following conditions occur:
The system controls the spinning of the
4 whee
Trending: change language, spare wheel, brake light, engine overheat, homelink, glove box, instrument cluster