seat adjustment TOYOTA SIENNA 2009 XL20 / 2.G Owners Manual

56
1-3. Adjustable components (seats, mirrors, steering wheel)
Front seats
Manual seat
Seat position adjustment lever
Seatback angle adjustment lever
Vertical height adjustment lever
Lumbar support adjustment knob
Seatback folding lever (if equipped)
Passenger’s seat Driver’s seat

57
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
■Seatback table (if equipped on manual seat)
The folded seat can be used as a temporary table. ( P. 397)
Power seat
Seat position adjustment switch
Seatback angle adjustment switch
Seat cushion (front) angle adjustment switch (driver’s side only)
Vertical height adjustment switch (driver’s side only)
Lumbar support switch (driver’s side only)

58 1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Seat adjustment
●Be careful that the seat does not hit passengers or luggage.
● Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
● Manual seat: After adjusting the seat, make sure that the seat is locked in
position.

59
1
1-3. Adjustable components (seats, mirrors, steering wheel)
Before driving
Second seats
■Tumbling the seat for third seat entry
The second seats can be tumbled for access to the third seat.
(To tumble the seats: P. 63)
■ Seatback table
The folded seats can be used as a temporary table. ( P. 397)
Seat position adjustment lever
Seatback angle adjustment lever/strap (from front)
The seatback can be folded down by this lever/strap.
Seatback angle adjustment strap (from rear)
The seatback can be folded down by this strap.
Center seatOuter seats

60 1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Seat adjustment
●Be careful that the seat does not hit passengers or luggage.
● Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
● After adjusting the seat, make sure that the seat is locked in position.
■ After access to the third seat
Return the seat and make sure that the seat is locked in position.

61
1
1-3. Adjustable components (seats, mirrors, steering wheel)
Before driving
Third seats
Manual seatSeatback angle adjustment
strap
Power seat Seatback angle adjustment
switch

62 1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Seat adjustment
●Be careful that the seat does not hit passengers or luggage.
● Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
● Align both seatbacks at the same angle when a person sits in the center
position.
● Manual seat: After adjusting the seat, make sure that the seat is locked in
position.

64 1-3. Adjustable components (seats, mirrors, steering wheel)
7-passenger models: Pull the
armrests up.
Outer seats: Fold down the seat-
back while pulling the seatback
angle adjustment lever or strap
and swing up the seat.
If the front seat is in the way,
adjust it so it will not interfere.
Center seat: Fold down the seat-
back while pulling the seatback
angle adjustment strap.
Pull up the seat lock release
lever (red) and swing up the
seat.
Take the holding strap out of the
pocket.
Pass the strap through the assist
grip, and hook it.
To secure the seat, pull the strap
until it is taut.
STEP2
STEP3
STEP3
STEP4

72 1-3. Adjustable components (seats, mirrors, steering wheel)
Folding the third seats (power seats)
You can operate the power third seats when the engine switch is in
the “ACC” or “LOCK” position, and/or the shift lever is in P.
■ Before folding the third seats
Lower the head restraints to the
lowest position and stow the seat
belt buckles.
Stow the center seat belt. ( P. 8 6 )
■ Folding the third seats
Press the folding/returning
switch.
■ Raising the third seats
Press the folding/returning switch, returning switch ( P. 7 6 ) o r
seatback angle adjustment switch ( P. 6 1 ) .
STEP1
STEP2

79
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
NOTICE
■To prevent damage to the seat
●Avoid putting heavy loads on a folded seat that is being used as a tempo-
rary table.
● Before folding a second seat as preparation for removal or tumbling the
seat, the seat belt buckles must be stowed.
● Do not sit on or put heavy loads on a second seat that has been removed
from the vehicle. The metal tips of the seat leg may be damaged, prevent-
ing reinstallation of the seat.
● The second seats must be reinstalled in their original positions. If they are
installed in the wrong position, the seat locks or bezels will be damaged.
● When installing a second seat, make sure to align the front leg hooks with
the rearmost of the two bars in each of the front strikers in the floor. If you
align the legs with the front strikers, the bezel in the floor will be damaged.
● Do not use the seat position adjustment lever to lift or carry a seat that has
been disengaged from the floor or removed from the vehicle. Otherwise,
during reinstallation, part of the seat may slide preventing proper reinstal-
lation of the seat. If this happens, return the seat to the rearmost position
before reinstalling it.
● Make sure that the path the seat will move through is clear before stowing
or returning the third seat.