TOYOTA SIENNA 2012 XL30 / 3.G Owners Manual

821
6-2. Customization
6
Vehicle specifications
SIENNA_U (OM45477U)
Choose a desired setting by
pressing the “INFO” or “SETUP”
button, then press the “SELECT
RESET” button to select.
If any settings are changed, the
display will revert to the previous
screen.
The illustration assumes that
“Auto Locking” was chosen in
.
The current setting is indicated by
yellow text.
If you select “Return” and press
the “SELECT RESET” button, the
display will revert to the previous
screen.
■ Restoring default settings
Press the “SETUP” button while
the vehicle is stopped.
The “Custom Settings” screen is
displayed on the multi-information
display.
If left idle for approximately 20
seconds, the display will revert to
the previous screen.
STEP4
STEP3
STEP1

822 6-2. Customization
SIENNA_U (OM45477U)Select “Default Settings” by
pressing the “INFO” or “SETUP”
button, and press the “SELECT
RESET” button.
If you select “Exit” and press the
“SELECT RESET” button, the
display will revert to the previous
screen.
Select “Yes” by pressing the
“INFO” or “SETUP” button, and
press the “SELECT RESET” but-
ton.
“Default Settings Restored” is dis-
played, and the default settings
are restored.
If you select “No” and press the
“SELECT RESET” button, the
display will revert to the “Custom
Settings” screen without restor-
ing the default settings.
STEP2
STEP3
■
If the vehicle is moved while setti ngs are being changed on the multi-
information display
 P. 263

823
6
Vehicle specifications
SIENNA_U (OM45477U)
6-3. Initialization
Items to initialize
ItemWhen to initializeReference
Power sliding door
(if equipped) After reconnecting or changing the
battery
P. 7 4
Power back door
(if equipped) After reconnecting or changing the
battery
P. 8 7
Maintenance data
(U.S.A. only) After the maintenance is performed P. 640
Tire pressure warning
system When changing the tire size P. 674
The following items must be init
ialized for normal system operation
after such cases as the battery being reconnected, or maintenance
being performed on the vehicle.

824 6-3. Initialization
SIENNA_U (OM45477U)

For owners7
825
SIENNA_U (OM45477U)
Reporting safety defects for U.S. owners .............. 826
Seat belt instructions for Canadian owners
(in French) ..................... 827
SRS airbag instructions for Canadian owners
(in French) ..................... 829

826
SIENNA_U (OM45477U)
Reporting safety defects for U.S. owners
If you believe that your vehicle has a defect which could cause a
crash or could cause injury or death, you should immediately
inform the National Highway Traffi c Safety Administration (NHTSA)
in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free:
1-800-331-4331).
If NHTSA receives similar complaints, it may open an investigation,
and if it finds that a safety defec t exists in a group of vehicles, it
may order a recall and remedy campaign. However, NHTSA can-
not become involved in individ ual problems between you, your
dealer, or Toyota Motor Sales, U.S.A., Inc.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free
at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://
www.safercar.gov
; or write to: Administrator, NHTSA, 1200 New
Jersey Ave, S.E., Washington, DC 20590. You can also obtain
other information about motor vehicle safety from http://
www.safercar.gov .

827
7
SIENNA_U (OM45477U)
For owners
Seat belt instructions for Canadian owners (in French)
The following is a French explanation of seat belt instructions
extracted from the seat belt section in this manual.
See the seat belt section for more detailed seat belt instructions in
English.

828
SIENNA_U (OM45477U)

829
7
SIENNA_U (OM45477U)
For owners
SRS airbag instructions for Canadian owners (in French)
The following is a French explanation of SRS airbag instructions
extracted from the SRS airb ag section in this manual.
See the SRS airbag section for more detailed SRS airbag instruc-
tions in English.

830
SIENNA_U (OM45477U)