warning TOYOTA SIENNA 2018 Owners Manual (in English)

1
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
INDEX


Engine maintenance 9
Fuel tank door release and cap 8
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Instrument panel light control 9
Keyless (and remote) entry
1 6-7
Smart Key system1,2 7
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONSFEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES
Air conditioning/heating 25
Audio 22
AUTO ACCESS SEAT 29-30
Auto lock/unlock
2 10
Automatic transmission 10
Bird’s Eye View Camera
with Perimeter Scan Function 27
Blind Spot Monitor (BSM) 20
Bottle holders 26
Cup holders 13
Door locks 10
Doors-Power sliding 17
Driver Easy Speak 20
Enhanced VSC OFF button 28
Garage door
opener (HomeLink
®)2,3 23
Hill-start Assist Control (HAC) 27
Lights
1 & turn signals 11-12
Moonroof 19
Parking brake 11
Power back door 18
Power outlets-12V DC 21
Power outlets-120V AC 21
Rear seat entertainment system 28
Rear view monitor system 26
Seat adjustments-Front 14
Seat adjustments-Rear 14
Seat heaters 26
Seats-Head restraints 17Seats-Removing
2nd row center seat 15
Seats-Removing
2nd row outside seats 15
Seats-Stowing 3rd row seats 16
Steering lock release 30
Steering wheel switches
& telephone controls (Bluetooth
®) 24
Sunshade-Side 19
Tilt & telescopic steering wheel 20
USB charging ports 23
Windows-Power 18
Windows-Quarter 19
Windshield wipers & washers 12
Child restraint anchors 41
Floor mat installation 45
Rear door child safety locks 41
Seat belts 42
Seat belts-Shoulder belt anchor 41
Spare tire & tools 43
Star Safety System
TM 44-45
Tire Pressure Monitoring
(warning) System (TPMS) 42
BLUETOOTH® DEVICE
PAIRING SECTION 46-48
TOYOTA SAFETY SENSE™ P (TSS-P)
Automatic High Beams (AHB) 40
Dynamic Radar
Cruise Control (DRCC) 37-39
Lane Departure Alert with Steering
Assist function (LDA w/SA) 34-36
Pre-Collision System with Pedestrian
Detection function (PCS w/PD) 32-34
Quick overview-
Toyota Safety Sense
™ P (TSS-P) 31
Sensors 31

2
OVERVIEW
Instrument panel
Steering wheel controls
Audio control switches2
Telephone switches2
Meter control switches
Dynamic Radar Cruise
Control (DRCC)
vehicle-to-vehicle
distance button
Dynamic Radar Cruise
control switch Lane Departure Alert
(LDA) switch Voice command switch
2
Headlight, turn signal and
front fog light1
controlsGauges and meters
Wiper and washer controls“ENGINE START STOP”
button (Smart Key)
1
Manual headlight leveling dial1
Power quarter window switch1
Intuitive parking assist switch1Enhanced VSC OFF switch Heated steering wheel switch
1
Bird’s Eye View Camera
ON/OFF switch1,2
Power sliding door1 /
Power back door main switch1
Fuel tank door release lever
Tilt & telescopic steering
lock release lever
Hood lock release lever
Tire pressure warning reset switchIgnition switch
1

4
ODO1000 miles
68°FExterior
OVERVIEW
Instrument cluster
For details, refer to “Indicators and warning lights,” Section 2-2, 2018 Owner’s
Manual.
Tachometer
Speedometer Multi-Information Display Outside temperature
Engine coolant
temperature
Instrument panel
light control buttonOdometer and trip
meter display Shift position
and rangeOdometer/Trip meter
display change buttonFuel gauge
Charging system warning1
Brake system warning1
AIR BAG ON/OFF indicator
Airbag SRS warning1
Arrow direction indicates fuel tank
door position
Automatic High Beam (AHB)
indicator
Anti-lock Brake System (ABS)
warning1
Blind Spot Monitor (BSM) outside
rearview mirror indicators3
Blind Spot Monitor (BSM) indicator3
Brake Override System warning
Driver and/or front passenger seat belt
reminder (alarm will sound if speed is
over 12 mph)
Constant speed cruise control
indicator2/Constant speed
cruise control SET indicator2
Dynamic Radar Cruise Control
(DRCC)indicator2/DRCC SET
indicator2
Indicator symbols
Service indicators and reminders

5
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
1
If indicator does not turn off within a few seconds of starting engine, there may be a malfunction.
Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Dynamic Radar Cruise Control,” Section 4-5, 2018 Owner’s Manual.3 If equipped.
Turn signal indicator
Fog light indicator3
High coolant temperature warning
Low engine oil pressure warning
1
Low Tire Pressure Warning1
Master warning light1
Low fuel level warning light
Lane Departure Alert (LDA) indicator
Low engine oil level warning
Electric power steering system
warning light1
Security indicator
ECO Driving Indicator Light1
ECT PWR indicator
Low outside temperature indicator
Vehicle Stability Control OFF
indicator1
Third seat fold incomplete
warning3
Slip indicator/Hill-start Assist
Control indicator1,5
Low windshield washer fluid level
warning
Rear Cross Traffic Alert
(RCTA) indicator3
Malfunction/Check Engine
indicator1
Pre-Collision System (PCS)
warning1
Headlight low/high
beam indicator

16
Seats-Stowing 3rd row seats
MANUAL
POWER
FEATURES & OPERATIONS
Lower
An alarm will sound for 10 seconds and the indicator will light up on the
instrument panel if the seat is not fully open or stowed when vehicle is shifted out
of Park.
Refer to the Owner’s Manual for more details.
Third seat fold incomplete
warning light
Stow the seat belt buckles
(2) (1)
(3)Lower
Push down Stow the seat belt buckles
Pull
(2) (1)
(3)
Push and hold

32
The Pre-Collision System uses a radar sensor and camera sensor to help detect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance
that this system can provide, do not overly rely on this system. This system will not
prevent collisions or lessen collision damage or injury in every situation. Do not use
PCS instead of normal braking operations under any circumstances. Do not attempt
to test the operation of the pre-collision system yourself, as the system may not
operate or engage, possibly leading to an accident. In some situations, such as
when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or
while driving on a curve and for a few seconds after driving on a curve, a vehicle
may not be detected by the radar and camera sensors, preventing the system from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/PD operation,
settings adjustments, limitations, and precautions before attempting to use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a
buzzer will sound and a warning message will be displayed on the Multi-Information
Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional
braking force using Brake Assist. This system may prime the brakes and may apply
greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the
possibility of a frontal collision with a preceding vehicle is extremely high, the
system may automatically apply the brakes, reducing speed in order to help the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)
TOYOTA SAFETY SENSE™

36
TOYOTA SAFETY SENSE™
DISABLING THE STEERING ASSIST FUNCTION
(1) Press “” switches to find and select .
(2) Press “
or ” switches to find the setting function and then press
“
”. The LDA Steering Assist system will be disabled.
(3) You can press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the same
condition regardless of Ignition cycle until changed by the driver or the system is reset.
ADJUSTING LDA ALERT SENSITIVITY
The driver can adjust the sensitivity of the LDA (warning) function from the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the
lane marker.
Normal - Is designed to warn approximately when the front tire crosses
the lane marker.
(1) Press “
” switches to find and select .
(2) Press “
or ” switches to find the setting function and then press
“
”. The setting screen is displayed.
(3) Select “Sensitivity” and then press “
.” Each time “” is pressed, the
response to the LDA alert sensitivity changes. You can press “
” to go back to
the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
THE SWAY WARNING SYSTEM (SWS) FUNCTION
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.

38
TOYOTA SAFETY SENSE™
ADJUSTING DISTANCE
To change the vehicle-to-vehicle distance

Push the “
” button to cycle
through the settings, which will
change progressively. Preceding vehicle mark
This mode employs a radar sensor to detect the presence of vehicles up to
approximately 328 ft (100 m) ahead, determines the current vehicle-to-vehicle
following distance and operates to maintain a suitable following distance from the
vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill slopes.
LONG
(default setting)MIDDLE SHORT
(1) Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-to-
vehicle distance can also be set by operating the vehicle-to-vehicle distance
control.
(2) Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically
decelerates your vehicle. When a greater reduction in vehicle speed is
necessary, the system applies the brakes (the brake lights will come on at this
time). The system will respond to changes in the speed of the vehicle ahead
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning
tone warns you when the system cannot decelerate sufficiently to prevent your
vehicle from closing in on the vehicle ahead.
(3) Acceleration when there are no longer any preceding vehicles driving
slower than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic
deceleration via the cruise control is not possible, the display will flash and the buzzer
will sound to alert the driver. An example of this would be if another driver cuts in
front of you while you are following a vehicle. Depress the brake pedal to ensure an
appropriate vehicle-to-vehicle distance.
(1) (2) (3)

42
SAFETY & EMERGENCY FEATURES
Seat belts
Tire Pressure Monitoring (warning) System (TPMS)
System reset initialization
1. Push and hold “
SET” button until
the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
After adjusting tire pressures, or after tires have been rotated or replaced, turn the
ignition switch to “ON” and press and hold the “
SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.
Keep as low on
hips as possible
Take up slack
Too high
127(,IDSDVVHQJHU