ECU TOYOTA SIENNA 2019 Owners Manual (in English)

231-2. Operating the AUTO ACCESS SEAT
SIENNA_AAS_OM08030U_(U)
1
AUTO ACCESS SEAT
WARNING
?When operating the AUTO ACCESS SEAT
?Check the surroundings for safety, making sure that there are no pedestri-
ans, bicycles, etc.
Failure to do so may result in an accident.
?Do not allow children to play in or operate the AUTO ACCESS SEA T, a s i t
may be damaged.
?Do not operate while parked on an
incline or on uneven ground. The occu-
pant may fall from the seat or from their
wheelchair, or you may be hit by the
wheelchair while putting it away, possi-
bly causing an injury.
Park the vehicle on a flat surface.
Shift the shift lever to P.
Set the parking brake securely.
?Operate the AUTO ACCESS SEAT
while being careful of the occupant’s
head, feet and hands.
Injury may result if they hit the vehicle
body.
1
2
3

402. Maintenance
SIENNA_AAS_OM08030U_(U)
Wireless remote control batter y
?Flathead screwdriver
?Lithium battery CR2032
Remove the cover using a coin
protected with tape etc.
Remove the depleted battery
using a flathead screwdriver.
Insert a new battery with the “+”
terminal facing up.
Securely replace the cover after
replacing the battery.
Replace the battery with a new one if it is discharged.
You will need the following items:
Replacing the battery
1
2
3

583. When you think a malfunction has occurred
SIENNA_AAS_OM08030U_(U)
WARNING
?When stowing the AUTO ACCESS SEAT manually
Do not put your feet or hands into the AUTO ACCESS SEAT stowage
space.
Your feet or hands may be caught in the movable parts of the AUTO
ACCESS SEAT, which could cause injuries.
?When the AUTO ACCESS SEAT has been stowed manually
?The seat is not locked and therefore could move during driving. Do not sit
in the AUTO ACCESS SEAT until repairs have been completed.
?Make sure the combination wrench is securely in place in its st orage loca-
tion to reduce the possibility of personal injury in the event of a sudden
braking, sudden swerving or an accident.
NOTICE
?To prevent loss of components
Put any removed components into a bag, and be careful not to lo se them.