night vision TOYOTA SIENNA HYBRID 2021 Owners Manual (in English)

20
* Intermittent windshield wiper frequency
adjustment: Rotate to increase/decrease
wiper frequency.
Intermittent (if equipped)
Adjust frequency*
FRONT
REAR
TURN SIGNALS
High beam
flasher (Pull)
* Move lever partway and release. The signals will flash three times.
FEATURES & OPERATIONS
Lights & turn signals
Daytime Running Light (DRL) system: Automatically turns on under certain
conditions to make vehicle more visible to other drivers. Not for use at night.
Automatic light cut off system
- Headlights are on: The lights will turn off automatically 30 seconds after the vehicle is turned from ON to ACC or OFF and a door is opened
and closed. (If the lock switch on the Smart Key remote
is pushed after all doors are closed, the lights will turn off
immediately.)
- Only the tail lights are on: The tail lights will turn off automatically if the vehicle is turned from ON to ACC or OFF and the driver’s door is
opened.
Automatic High Beams (AHB) system*: Automatically switches between high and low beams
as appropriate to enhance vision at night.
Refer to Toyota Safety Sense™ 2.0 (TSS 2.0) in this guide or the Owner’s Manual
for more details on the Automatic High Beams feature.
* Operating conditions must be met. Refer to the Owner’s Manual for details.
High beam (Push)
Front fog light can be used when the parking lights are on or the headlights are on
in low beam.
Turn
ON
OFF
FRONT FOG LIGHTS (IF EQUIPPED)
HEADLIGHTS
Parking lights
Auto
Headlights
DRL OFF Low beam
(Original position)
MY21_Sienna_QRG_V4_ML_0929.indd 2010/5/20 12:14 PM

21
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
ON
Interval wipe
OFF
Windshield wipers & washers
* Intermittent windshield wiper frequency
adjustment: Rotate to increase/decrease
wiper frequency. **
Rain-sensing windshield wiper sensitivity
adjustment: Rotate to increase/decrease
sensor sensitivity.
Intermittent (if equipped)
Adjust frequency* Adjust sensitivity**Mist and single
wipeMist and single
wipe
Interval wipeAUTO
Slow Slow
FastFast
Pull to wash
and wipe Pull to wash
and wipe
Push to wash and wipe
OFF
OFF
Rain-sensing (if equipped)
FRONT
REAR
Right turn
Lane change*
Lane change* Left turn
TURN SIGNALS
High beam
flasher (Pull)
* Move lever partway and release. The signals will flash three times.
Daytime Running Light (DRL) system: Automatically turns on under certain
conditions to make vehicle more visible to other drivers. Not for use at\
night.
Automatic light cut off system
- Headlights are on: The lights will turn off automatically 30 seconds a\
fter the vehicle is turned from ON to ACC or OFF and a door is opened
and closed. (If the lock switch on the Smart Key remote
is pushed after all doors are closed, the lights will turn off
immediately.)
- Only the tail lights are on: The tail lights will turn off automatical\
ly if the vehicle is turned from ON to ACC or OFF and the driver’s door is
opened.
Automatic High Beams (AHB) system*: Automatically switches between high and low beams as appropriate to enhance vision at night.
Refer to Toyota Safety Sense™ 2.0 (TSS 2.0) in this guide or the Ow\
ner’s Manual
for more details on the Automatic High Beams feature.
* Operating conditions must be met. Refer to the Owner’s Manual for d\
etails.
Front fog light can be used when the parking lights are on or the headli\
ghts are on
in low beam.
MY21_Sienna_QRG_V4_ML_0929.indd 2110/5/20 12:14 PM