light TOYOTA SOLARA 2004 Accessories, Audio & Navigation (in English)

BASIC FUNCTIONS
2
Display operation
1U009
You can adjust the angle of the display by
pushing the
TILTº button. Each push of
the
TILTº button will tilt the display to
positions
1, 2, 3 and then back to 0 in
the reverse order.
If you turn the ignition switch off, the display
will automatically move back to position
0.
The display will automatically resume the pre-
vious position when the ignition switch is
turned to the ACCº or ONº position.
CAUTION
Take care not to jam your hand while the
display is moving. Otherwise, you
could be injured.
NOTICE
Do not obstruct the display while it is moving. It could damage your naviga-tion system.
INFORMATION
Under extremely cold conditions, thedisplay may react slowly or operationsound may become louder.
Touch switch operation
This system is operated mainly by the
switches on the screen. To prevent dam-
age to the screen, lightly touch switches
on the screen with your finger. When you
touch a switch on the screen, a beep
sounds.
Do not use objects other than your finger
to touch the screen.
INFORMATION

If the system does not respond to atouch of a switch, move your fingeraway from the screen and then touchit again.

You cannot operate dimmedswitches.

Wipe off fingerprints on the surface ofthe display using a glass cleaningcloth.

The displayed image may becomedarker and moving images may beslightly distorted when the display iscold.

Under extremely cold conditions, themap may not be displayed and the
data input by a user may be deleted.Also, the switches may be harderthan usual to depress.

DESTINATION INPUT AND ROUTE GUIDANCE
40
Info.º: To display the following information
about each of the 3 routes.
1Time necessary for entire trip
2Distance of entire trip
3Toll road
4Freeway
5Ferry
Ð Route guidance screen
When starting route guidance, the following
screen is displayed.
This scr een displays the route that guides the
driver to the destination.
The route to the destination is indicated by a
highlighted line. Drive along the guided route.
When the vehicle approaches a guidance
point such as an intersection or a freeway, the
screen automatically divides in two to display
the guidance screen. (For details, see page
53.)
The current street name will be displayed at
the bottom of the screen.
In some areas, the roads have not been com-
pletely digitized in our database yet. For this
reason, the route guidance may guide the
road that is not allowed to pass.
Ð Typical voice guidance
prompts
The voice guidance provides various mes-
sages as you approach an intersection, or
other point where you need to maneuver the
vehicle.
1Proceed about 5 miles.º
2In a quarter of a mile, right turn.º
3Right turn.º
4(Beep sound only)

ADVANCED FUNCTIONS
63
Volume
You can use voice guidance when ap-
proaching a destination.
You can adjust the volume of the voice or turn
off voice guidance.
Push the MENUº button to display the
Menuº screen, and touch the Volumeº
switch.
To adjust the volume, select the desired level
by touching the appropriate number.
If you do not need voice guidance, touch the
Offº switch.
The selected item is highlighted in green.
INFORMATION
During route guidance, the voice guid- ance continues even if the navigationscreen is changed to other screens.
Adaptive Volume Controlº: If you turn the
Adaptive Volume Controlº on, the volume is
turned up automatically when the vehicle
speed exceeds 50 mph (80 km/h).
To turn the Adaptive Volume Controlº system
on, touch the switch. The indicator will be
highlighted.
User selection
The system can memorize the following
settings for up to three users.

Map direction

Map scale

Guidance mode

Setup

Volume

Language
Push the MENUº button to display the
Menuº screen. Then touch the
Select
Userº
switch.

ADVANCED FUNCTIONS
79
Distance unit
1. Push the MENUº button.
2. Touch the Setupº switch.
3. Touch the kmº or milesº switch of
Distanceº to choose the distance unit.
The selected switch is highlighted in green.
4. Touch the
OKº switch.
Estimated travel time
You can set the speed that is used for the
calculation of the estimated travel time.
1. Push the MENUº button.

ADVANCED FUNCTIONS
81
Auto reroute
When the Auto Rerouteº feature is turned
on, the system will automatically search
for a new route to the destination if you
strays from the guidance route. This fea-
ture does not operate while you are driving
on roads where guidance is not available.
To turn the Auto Rerouteº mode on:
1. Push the
MENUº button.
2. Touch the Setupº switch.
3. Touch the Onº switch of Auto
Rerouteº.
The selected switch is highlighted in green.
INFORMATION
If your vehicle strays from the guidance route, the system searches for a newroute to the destination. The new route
may or may not take you back to the pre-vious route depending on how far you
are off the original guidance route.
Adjusting time zone
1. Push the MENUº button.
2. Touch the Setupº switch.

ADVANCED FUNCTIONS
82
3. Touch the Changeº switch. The
Adjust T ime Zoneº screen appears on the
display.4. Touch the desired time zone.
The selected switch is highlighted in green.
5. Touch the
OKº switch on the screen
and the Setupº screen will be displayed.
Auto voice guidance
When the Auto Voice Guidanceº feature
is turned on, the voice guidance can be
heard automatically.
When the Auto Voice Guidanceº feature
is turned off, the voice guidance can be
heard only if you push the
MAP/
VOICEº
button.
To turn the Auto Voice Guidanceº mode
on:
1. Push the
MENUº button.
2. Touch the Setupº switch. Then
touch
switch to display page 2 of the
Setupº screen.

ADVANCED FUNCTIONS
83
3. Touch the Onº switch of Auto V oice
Guidanceº.
The selected switch is highlighted in
green.
Voice guidance in all modes
When the Voice Guidance in All Modesº
feature is turned on, you can hear the
voice guidance in all modes.
When the Voice Guidance in All Modesº
feature is turned off, voice guidance can-
not be heard when you using the audio
system.
To turn the Voice Guidance in All Modesº
on:
1. Push the
MENUº button.2. Touch the Setupº switch. Then
touch
switch to display page 2 of the
Setupº screen.

OTHER FUNCTIONS
109
Depending on the position of the headlight
switch, the screen changes to the day
mode or night mode.
To display the screen in the day mode even
with the headlight switch on, touch the
DAY
MODEº
switch on the adjustment screen for
brightness and contrast control.
If the screen is set in the day mode with the
headlight switch turned to on, this condition is
memorized in the system even with the en-
gine turned off.
Screen setting
1. Push the INFOº button to display the
Information Menuº screen.
2. Touch the Screen Settingº switch.
(a) Automatic transition
You can select a function that enables au-
tomatic return to the navigation screen
from the audio screen.
Select ONº or OFFº and then touch
the
OKº switch.
ONº: The navigation screen automatically
returns from the audio screen 20
seconds after the end of audio op-
eration.
OFFº: The audio screen remains on.

AUDIO SYSTEM
11 4
Push AM´SATº, FMº or DISCº button to
turn on the desired mode. The selected
mode turns on immediately.
Push these buttons if you want to switch from
one mode to another.
If the disc is not set, the compact disc player
does not turn on.
You can turn off the compact disc player by
ejecting the compact disc. If the audio system
was previously off, then the entire audio sys-
tem will be turned off when you eject the com-
pact disc. If the another function was pre-
viously playing, it will come on again.
The switches for radio and compact disc
player operation are displayed on the
function switch display screen when the
audio control mode is selected. Touch
them lightly and directly on the screen.
The selected switch is highlighted in green or
yellow.
INFORMATION
If the system does not respond to a
touch of a switch, move your fingeraway from the screen and then touchit again.
You cannot operate dimmedswitches.
Wipe off fingerprints on the surface ofthe display using a glass cleaningcloth.

AUDIO SYSTEM
11 7
(b) Presetting a station
1. Tune in the desired station.
2. Touch one of the switches (1 Ð 6) you
want and hold it until a beep is heard. This
sets the station to the switch and the fre-
quency appears on the switch.
Each radio mode (AM, FM1 or FM2) can store
up to 6 stations. To change the preset station
to a different one, follow the same procedure.
The preset station memory is cancelled when
the power source is interrupted by battery dis-
connection or a blown fuse. (c) Selecting a station
Tune in the desired station using one of the
following methods.
Preset tuning:
Touch the switch (1 Ð 6) for
the station you want. The switch is high-
lighted in green and the station frequency ap-
pears on the screen.
Seek tuning: Push the SEEK/TRACKº but-
ton on either side. The radio will begin seek-
ing up or down for a station of the nearest fre-
quency and will stop on reception. Each time
you push the button, the stations will be
searched out automatically after another.
To scan all the frequencies: Touch the
SCANº switch on the screen or push the
SCANº button briefly. SCANº appears on
the screen. The radio will find the next station
and stay there for a few seconds, and then
scan again. To select a station, touch the
SCANº switch or push the SCANº button
again.
To scan the preset stations: Touch the
SCANº switch on the screen or push the
SCANº button for longer than approximately
a second. P. SCANº appears on the screen.
The radio will tune in the next preset station,
stay there for a few seconds, and then move
to the next preset station. To select a station,
touch the SCANº switch or push the SCANº
button again. (d) Radio Data System
Your audio system is equipped with Radio
Data Systems (RDS). RDS mode provides
you to receive text messages from radio sta-
tions that utilize RDS transmitters.
When RDS is on, the radio can
Ð only select stations of a particular program
type,
Ð display messages from radio stations,
Ð search for a stronger signal station.
RDS features are available for the use only on
FM stations which broadcast RDS informa-
tion.
V