service reset TOYOTA SUPRA 2020 Warranties & Maintenance Guides (in English)

39
40,000 miles or 48 months
Check installation of driver’s floor mat
Inspect and adjust all fluid levels1

Inspect radiator, condensor and/or intercooler
Inspect wiper blades
Perform road test

Replace cabin air filter
Replace engine air filter
Replace engine oil and oil filter3
Replace spark plugs6
Reset tire pressure settings in central information display (CID)

Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_
Brake lines and hoses

_
Coolant level and coolant composition

_
Heater/air conditioning blower motor

_

Horn, headlight flashers
and hazard warning flashers

_
Lighting system

_
Mobility system
7

_
Seat belts




Dealer Service verification:
D
ate:
Mileage:



1
inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed
component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect
power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant
level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on
inspection results.
2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and
may require replacement.
3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when
driven less than 10,000 miles since the last oil change. reset maintenance reminder light, if oil was changed
4 replace brake pads when the brake warning light appears.5 initial replacement at 36 months. replace every 24 months thereafter.6 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.7 check the sealant container expiration date during inspection. replace the sealant container with a new one before th e
expiration date. refer to the

41
80,000 miles or 96 months
Check installation of driver’s floor mat
Inspect and adjust all fluid levels1

Inspect radiator, condensor and/or intercooler
Inspect wiper blades
Perform road test

Replace cabin air filter
Replace engine air filter
Replace engine oil and oil filter3
Replace spark plugs5
Reset tire pressure settings in central information display (CID)

Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:

_
Brake lines and hoses

_
Coolant level and coolant composition

_
Heater/air conditioning blower motor

_

Horn, headlight flashers
and hazard warning flashers

_
Lighting system

_
Mobility system
6

_
Seat belts




Dealer Service verification:
D
ate:
Mileage:

_
Steering linkage and boots

_
tires

_

vehicle underbody and all other
visible components

_
Warning triangle

_
Wiper and washer system

1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed
component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect
power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant
level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on
inspection results.
2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and
may require replacement.
3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when
driven less than 10,000 miles since the last oil change. reset maintenance reminder light, if oil was changed.
4 replace brake pads when the brake warning light appears.5 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.6 check the sealant container expiration date during inspection. replace the sealant container with a new one before th e
expiration date. refer to the

43
120,000 miles or 144 months
Check installation of driver’s floor mat
Inspect and adjust all fluid levels1

Inspect radiator, condensor and/or intercooler
Inspect wiper blades
Perform road test

Replace cabin air filter
Replace engine air filter
Replace engine oil and oil filter3
Replace spark plugs5
Reset tire pressure settings in central information display (CID)

Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_
Brake lines and hoses

_
Coolant level and coolant composition

_
Heater/air conditioning blower motor

_

Horn, headlight flashers
and hazard warning flashers

_
Lighting system

_
Mobility system
6

_
Seat belts




Dealer Service verification:
D
ate:
Mileage:
1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed
component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect
power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant
level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on
inspection results.
2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and
may require replacement.
3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when
driven less than 10,000 miles since the last oil change. reset maintenance reminder light, if oil was changed.
4 replace brake pads when the brake warning light appears.5 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.6 check the sealant container expiration date during inspection. replace the sealant container with a new one before th e
expiration date. refer to the