steering wheel TOYOTA T100 1996 Factory User Guide

Downloaded from www.Manualslib.com manuals search engine − SERVICE SPECIFICATIONSSUSPENSION AND AXLE
SS−61
235 Author: Date:
1996 TOYOTA T100 (RM449U) Wheel alignment
(Standard loaded
vehicle condition)
(4WD)
Vehicle height STD cab
Extra cabFront *158.0 mm (2.283 in.)
Rear *223.0 mm (0.906 in.)
Front *158.0 mm (2.283 in.)
Rear *228.0 mm (1.102 in.)
Camber
Left−right error0°45’ ± 45’ (0.75° ± 0.75°)
45’ (0.75°) or less
Caster STD cab
Extra cab
Left−right error1°30’ ± 45’ (1.5° ± 0.75°)
1°20’ ± 45’ (1.33° ± 0.75°)
45’ (0.75°) or less
Steering axis inclination
Left−right error11°50’ ± 45’ (11.83° ± 0.75°)
45’ (0.75°) or less
To e−in (Total)STD cab
Extra cab (P235/75R15)
Extra cab (31x10.5R15)
Rack end length difference0°05’ ± 12’ (0.08° ± 0.2°, 1.0 ± 2 mm, 0.04 ± 0.08 in.)
−0°08’ ± 12’ (−0.14° ± 0.2°, 1.9 ± 2 mm, −0.07 ± 0.08 in.)
−0°08’ ± 12’ (−0.14° ± 0.2°, 2.0 ± 2 mm, −0.08 ± 0.08 in.)
3.0 mm (0.118 in.) or less
Wheel angle
STD cab Inside wheel
Outside wheel
Extra cab Inside wheel
Outside wheel
Left−right error
32°01’ ± 2° (32.02° ± 2°)
30°12’ (30.2°)
32°14’ ± 2° (32.23° ± 2°)
29°59’ (29.99°)
30’ (0.5°) or less
Wheel alignment
(Non−loaded
vehicle condition)
(4WD)
Vehicle height
VCK21L−TRMDKA P235/75R15
Front*138.3 mm (1.508 in.)
Rear*270.7 mm (2.783 in.)
VCK21L−TRMDKA 31x10.5R15Front*138.3 mm (1.508 in.)
Rear*272.6 mm (2.858 in.)
VCK21L−TRSDKA P235/75R15Front*140.0 mm (1.575 in.)
Rear*269.5 mm (2.736 in.)
VCK21L−TRSDKA 31x10.5R15Front*140.0 mm (1.575 in.)
Rear*271.4 mm (2.811 in.)
VCK21L−CRM#KA P235/75R15Front*132.3 mm (1.272 in.)
Rear*277.2 mm (3.039 in.)
VCK21L−CRM#KA 31x10.5R15Front*132.3 mm (1.272 in.)
Rear*279.4 mm (3.126 in.)
VCK21L−CRS#KA P235/75R15Front*132.3 mm (1.272 in.)
Rear*276.2 mm (3.000 in.)
VCK21L−CRS#KA 31x10.5R15Front*132.3 mm (1.272 in.)
Rear*278.3 mm (3.083 in.)
#: Any letter is applicable.
*
1: A − B
A: Ground clearance of spindle center.
B: Ground clearance of lower suspension arm bolt center.
*
2: C − D
C: Ground clearance of leaf spring front bushing center.
D: Ground clearance of rear axle shaft center.

Downloaded from www.Manualslib.com manuals search engine SS−62
− SERVICE SPECIFICATIONSSUSPENSION AND AXLE
236 Author: Date:
1996 TOYOTA T100 (RM449U) Wheel alignment
(Non−loaded
vehicle condition)
(4WD)
Camber STD cab
Extra cab
Left−right error0°35’ ± 45’ (0.59° ± 0.75°)
0°40’ ± 45’ (0.66° ± 0.75°)
45’ (0.75°) or less
Caster STD cab
Extra cab
Left−right error0°59’ ± 45’ (0.98° ± 0.75°)
1°10’ ± 45’ (1.17° ± 0.75°)
45’ (0.75°) or less
Steering axis inclination
Left−right error12°00’ ± 45’ (12° ± 0.75°)
45’ (0.75°) or less
To e−in (Total)STD cab
Extra cab (P235/75R15)
Extra cab (31x10.5R15)0°12’ ± 12’ (0.2° ± 0.2°, 2.7 ± 2 mm, 0.11 ± 0.08 in.)
0°08’ ± 12’ (0.14° ± 0.2°, 1.9 ± 2 mm, 0.07 ± 0.08 in.)
0°08’ ± 12’ (0.14° ± 0.2°, 2.0 ± 2 mm, 0.08 ± 0.08 in.)
Wheel angle
STD cab Inside wheel
Outside wheel
Extra cab Inside wheel
Outside wheel
32°45’ ± 2° (32.75° ± 2°)
30°31’ (30.52°)
33°07’ ± 2° (33.12° ± 2°)
30°31’ (30.52°)
Front axle (2WD)
Axle hub axial playMaximum0.05 mm (0.0020 in.)
Axle hub preload (at starting)Friction force plus
5.0 − 14.0 N (0.5 − 1.4 kgf, 1.1 − 3.1 in.)
Front axle (4WD)Axle hub preload (at starting)25 − 53 N (2.6 − 5.4 kgf, 5.7 − 11.9 lbf)
Front drive shaft thrust clearanceStandard0.1 − 0.5 mm (0.0039 − 0.0197 in.)
Front drive shaft
(4WD)Drive shaft length481.2 − 491.2 mm (18.945 − 19.339 in.)
Front suspension
(2WD)Upper ball joint turning torque2.0 − 3.9 N·m (20 − 40 kgf·cm, 17 − 34 in.·lbf)
Lower ball joint turning torque2.0 − 7.0 N·m (20 − 70 kgf·cm, 17 − 61 in.·lbf)
Front suspension
(4WD)Upper ball joint turning torque0.5 − 2.4 N·m (5 − 25 kgf·cm, 4 − 22 in.·lbf)
Lower ball joint turning torque2.0 − 3.9 N·m (20 − 40 kgf·cm, 17 − 34 in.·lbf)
Rear axleShaft runoutMaximum2.0 mm (0.079 in.)
Flange runoutMaximum0.1 mm (0.004 in.)
Front differential
(4WD)
Companion flange vertical runoutMaximum0.10 mm (0.0039 in.)
Companion flange lateral runout Maximum0.10 mm (0.0039 in.)
Drive pinion bearing preload (at starting)
New bearing
Reused bearing
1.2 − 1.9 N·m (12 − 19 kgf·cm, 10.4 − 16.5 in.·lbf)
0.6 − 1.0 N·m (6 − 10 kgf·cm, 5.2 − 8.7 in.·lbf)
Total preload (at starting)In addition to drive pinion preload
0.4 − 0.6 N·m (4 − 6 kgf·cm, 3.5 − 5.2 in.·lbf)
Pinion gear to side gear backlash0.05 − 0.20 mm (0.0020 − 0.0079 in.)
Drive pinion to ring gear backlash0.13 − 0.18 mm (0.0051 − 0.0070 in.)
Ring gear runoutMaximum0.07 mm (0.0028 in.)
Rear oil seal drive in depth1.5 mm (0.059 in.)
Side gear shaft tube LH side oil seal drive in depth2.5 mm (0.098 in.)
A.D.D. sleeve fork to clutch sleeve clearance0.35 mm (0.0138 in.)
Differential bearing press in depth2.0 mm (0.079 in.)

Downloaded from www.Manualslib.com manuals search engine SS085−01
SS−70
− SERVICE SPECIFICATIONSBRAKE
1996 TOYOTA T100 (RM449U)
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
Master cylinder x Piston stopper bolt101007
Master cylinder x Reservoir1.717.515.2 in.·lbf
Master cylinder x Brake booster131309
Brake line union nut1515511
Brake booster clevis lock nut2526019
Brake booster x Pedal bracket131309
Front disc brake caliper installation bolt 2WD 1.0 ton3940029
2WD 0.5 ton3637027
4WD1231,25090
Bleeder plug1111 08
Front disc brake torque plate x Steering knuckle 2WD1081,10080
Front disc x Front axle hub6465047
Front disc brake caliper x Flexible hose1515511
Rear drum brake wheel cylinder x Backing plate101007
Parking brake bellcrank bracket x Backing plate131309
LSP & BV installation nut131309
LSP & BV x Load Sensing Spring Assembly1818513
Load Sensing Spring Assembly x Shackle No.11818513
Shackle No.1 x Shackle No.22525018
Shackle No.2 x Shackle Bracket131309
LSP & BV x Frame2930011
ABS actuator x ABS actuator bracket5.45548 in.·lbf
ABS actuator bracket x Body1919514
Speed sensor installation bolt8.08271 in.·lbf
Front speed sensor wire harness clamp5.05144 in.·lbf
Rear speed sensor wire harness clamp131309

Downloaded from www.Manualslib.com manuals search engine SS08W−01
− SERVICE SPECIFICATIONSSTEERING
SS−71
245 Author: Date:
1996 TOYOTA T100 (RM449U)
STEERING
SERVICE DATA
ON−VEHICLE INSPECTION
Steering wheel freeplayMaximum30 mm (1.18 in.)
3RZ−FE:
Drive belt tension New belt135−185 lbf
Drive belt tension Used belt80−120 lbf
Oil level rise MaximumBelow 5 mm (0.20 in.)
5VZ−FE:
Drive belt tension New belt135−180 lbf
Drive belt tension Used belt85−120 lbf
Oil level rise MaximumBelow 5 mm (0.20 in.)
3RZ−FE and 5VZ−FE (2WD):
Oil pressure at idle speed with valve closedMinimum7,845 kPa (80 kgf/cm2, 1,138 psi)
5VZ−FE (4WD):
Oil pressure at idle speed with valve closedMinimum8,336 kPa (85 kgf/cm2, 1,209 psi)
Steering effort at idle speedMaximum8.3 N·m (85 kgf·cm, 73 in.·lbf)
TILT STEERING COLUMN
Pawl stopper
1 or A12.68 − 12.74 mm (0.4992 − 0.5016 in.)
2 or B12.61 − 12.67 mm (0.4965 − 0.4988 in.)
3 or C12.54 − 12.60 mm (0.4937 − 0.4961 in.)
4 or D12.47 − 12.53 mm (0.4909 − 0.4933 in.)
5 or E12.40 − 12.46 mm (0.4882 − 0.4906 in.)
6 or F12.33 − 12.39 mm (0.4854 − 0.4878 in.)
7 or G12.26 − 12.32 mm (0.4827 − 0.4850 in.)
PS VANE PUMP
3RZ−FE and 5VZ−FE:
Pump shaft and front housing bushing oil clearance STD0.03−0.05 mm (0.0012−0.0020 in.)
Pump shaft and front housing bushing oil clearanceMaximum0.07 mm (0.0028 in.)
Vane plate heightMinimum8.6 mm (0.339 in.)
Vane plate thicknessMinimum1.397 mm (0.0550 in.)
Vane plate lengthMinimum14.991 mm (0.5902 in.)
Vane plate and pump rotor groove clearanceMaximum0.035 mm (0.0014 in.)
Vane plate length Pump rotor and cam ring mark
None14.999−15.001 mm (0.59051−0.59059 in.)
114.997−14.999 mm (0.59043−0.59051 in.)
214.995−14.997 mm (0.59035−0.59043 in.)
314.993−14.995 mm (0.59027−0.59035 in.)
414.991−14.993 mm (0.59020−0.59027 in.)
Flow control valve spring lengthMinimum32.3 mm (1.272 in.)
Pump rotating torqueMaximum0.25 N·m (2.5 kgf·cm, 2.2 in.·lbf) or less
PS GEAR
2WD:
Steering rack runoutMaximum0.3 mm (0.0118 in.)

Downloaded from www.Manualslib.com manuals search engine SS08X−01
− SERVICE SPECIFICATIONSSTEERING
SS−73
1996 TOYOTA T100 (RM449U)
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
STEERING COLUMN
NON−TILT STEERING COLUMN:
Steering wheel set nut3536026
Steering wheel pad set screw (Torx screw)9.09078 in.·lbf
Steering column assembly set bolt and nut2526019
Control shaft lever x Control shaft assembly AT3536026
Intermediate shaft x Control valve assembly 2WD3536026
Intermediate shaft x Worm gear valve assembly 4WD3536026
Sliding w/shaft york sub−assembly x Intermediate shaft3536026
Main shaft assembly x Sliding w/shaft york sub−assembly3536026
TILT STEERING COLUMN:
Steering wheel set nut3536026
Steering wheel pad set screw (Torx screw)9.09078 in.·lbf
Steering column assembly set bolt and nut2526019
Control shaft lever x Control shaft assembly AT3536026
Intermediate shaft x Control valve assembly 2WD3536026
Intermediate shaft x Worm gear valve assembly 4WD3536026
Sliding w/shaft york sub−assembly x Intermediate shaft3536026
Sliding york sub−assembly x Sliding w/shaft york sub−assembly3536026
Main shaft assembly x Sliding york sub−assembly3536026
Turn signal bracket set bolt7.88069 in.·lbf
Tilt lever assembly set bolt22017 in.·lbf
Tilt sub lever side pawl set bolt x nut5.96052 in.·lbf
Tilt lever retainer set nut1515011
Compression spring set bolt7.88069 in.·lbf
PS VANE PUMP
3RZ−FE and 5VZ−FE:
Union bolt x Pressure feed tube4747534
Pressure port union x Pump housing8385061
Bracket x Pump assembly 5VZ−FE4344032
Rear housing set bolt2424017
Oil reservoir set bolt Front131309
Rear2424017
Vane pump pulley set nut4344032
Vane pump assembly set bolt 3RZ−FE3940029
Vane pump assembly with bracket set bolt and nut 5VZ−FE3940029
PS GEAR
2WD:
Control valve housing x Rack housing1818513
Self−locking nut2525018
Rack housing cap6970051
Rack guide spring cap lock nut51 (60)521 (700)38 (51)
Rack x Rack end61 (83)618 (850)45 (62)

Downloaded from www.Manualslib.com manuals search engine SS08D−01
SS−76
− SERVICE SPECIFICATIONSSUPPLEMENTAL RESTRAINT SYSTEM
1996 TOYOTA T100 (RM449U)
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
Steering wheel3435025
Steering wheel pad8.89078 in.·lbf
Airbag sensor assembly2121015
Front airbag sensor2930022

Downloaded from www.Manualslib.com manuals search engine W03146 W03147
AB0130 AB0045AB0046AB0027
H00320
Airbag Sensor Assembly Connector (Connector ”1”)
Spiral Cable Connector (Connector ”2”)
Short SpringShort Spring
Before Release
After Release After Release Before Release
PaperPaper
Center
Airbag
Sensor
AssemblyJ/B No.1
Squib
RH and LH Front Airbag Sensors Spiral Cable Connector ”1” Connector ”2”
DI−368
− DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1996 TOYOTA T100 (RM449U)
CAUTION:
Never release the airbag activation prevention mechanism
on the steering wheel pad connector.
NOTICE:
Do not release the airbag activation prevention mech-
anism unless specifically directed by the trouble-
shooting procedure.
If the paper inserted is too thick the terminal and short
spring may be damaged, so always use paper the
same thickness as the male terminal.

Downloaded from www.Manualslib.com manuals search engine DI0XK−02
− DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI−369
1996 TOYOTA T100 (RM449U)
DIAGNOSTIC TROUBLE CODE CHART
If a malfunction code is displayed during the DTC check, check the circuit listed for that code in the table
below (Proceed to the page given for that circuit.).
DTC No.
(See Page)Detection ItemTrouble AreaSRS
Warning Light
Normal
(DI−396)System normal−OFF
Source voltage dropBattery
Center airbag sensor assemblyON
11
(DI−373)
Short in squib circuit or front airbag
sensor circuit (to ground)Steering wheel pad (D squib)
Front airbag sensor
Spiral cable
Center airbag sensor assembly
Wire harness
ON
12
(DI−379)
Short in squib circuit or front airbag
sensor circuit (to B+)Steering wheel pad (D squib)
Front airbag sensor
Spiral cable
Center airbag sensor assembly
Wire harness
ON
14
(DI−385)
Open in D squib circuitSteering wheel pad (D squib)
Spiral cable
Center airbag sensor assembly
Wire harness
ON
15
(DI−390)Open in front airbag sensor circuitFront airbag sensor
Center airbag sensor assembly
Wire harness
ON
31
(DI−394)
Center airbag sensor assembly
malfunctionCenter airbag sensor assembly
ON
HINT:
When the SRS warning light remains lit up and the DTC is the normal code, this means a source voltage
drop. This malfunction is not stored in memory by the center airbag sensor assembly and if the power
source voltage returns to normal, approx. 10 seconds the SRS warning light will automatically go out.
When 2 or more codes are indicated, the lowest numbered code will apper first.
If a code not listed on the chart is displayed, the center airbag sensor assembly is faulty.

Downloaded from www.Manualslib.com manuals search engine DI0XL−02
R12499
Front Airbag Sensor RH
Front Airbag Sensor LH
Junction Block No.1
Center Airbag Sensor Assembly Spiral CableSRS Warning Light
Steering Wheel Pad
(with Airbag)
DI−370
− DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1996 TOYOTA T100 (RM449U)
PARTS LOCATION

Downloaded from www.Manualslib.com manuals search engine DI0XO−02
R15205
Center Airbag Sensor Assembly
Front Airbag Sensor RH
Front Airbag Sensor LH D Squib
Spiral
CableW−B
W−B +SR
+SLB
L B−L W
D+
D−1
2
1
2 13
14 1
27
6
− DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI−373
1996 TOYOTA T100 (RM449U)
CIRCUIT INSPECTION
DTC 11 Short in Squib Circuit (to Ground)
CIRCUIT DESCRIPTION
The squib circuit consists of the center airbag sensor assembly, spiral cable and steering wheel pad. If
causes the SRS to deploy when the SRS deployment conditions are satisfied.
The front airbag sensor detects the deceleration force in a frontal collision and is located in the front fender
apron on the left and right sides.
For details of the function of each component, see OPERATION on page RS−2.
DTC 11 is recorded when ground short is detected in the squib circuit or front airbag sensor circuit.
DTC No.DTC Detecting ConditionTrouble Area
11
Short circuit in squib wire harness (to ground)
Squib malfunction
Short circuit in front airbag sensor +S wire harness
(to ground)
Front airbag snesor malfunction
Spiral cable malfunction
Center airbag sensor assembly malfunction
Steering wheel pad (D squib)
Front airbag sensor
Spiral cable
Center airbag sensor assembly
Wire harness
WIRING DIAGRAM