glove box TOYOTA T100 1996 Factory Service Manual

Downloaded from www.Manualslib.com manuals search engine BO0EK−02
N20330
Instrument Panel ReinforcementCenter Defroster NozzleFront Pillar Garnish Brace No. 3
Cowl Side Trim
Front Door Scuff Plate Duct Heater to
Register No. 4
Center Register
Duct Heater to Register No. 1
Instrument Panel
Combination Meter
Center Cluster Finish Panel
Steering ColumnCluster Finish Panel
Combination Switch
Steering Column Cover
Lower Center CoverGlove Compartment DoorRear Console Box Stereo Opening Cover
Steering Wheel PadRadio
Steering Wheel B
Lower Finish Panel No. 2 Brace No. 1
Brace No. 2
Side Bracket RH
Ash Tray Register No. 1
Center Cluster Finish Lower Panel
Duct Heater to Register No. 2
Glove Compartment
Door Reinforcement Lower Finish Panel No. 1I
Side Bracket LHF
G
A
H
D HA
D A A
A
AAGG
G E
E
E
E EF
F
F
F
F
E
EF B B
B
B
EE I
I
I
B BBB B
C
A
CADuct Heater to
EE
35 (360, 26)
N·m (kgf·cm, ft·lbf) : Specified torque BO−34
− BODYINSTRUMENT PANEL
1918 Author: Date:
1996 TOYOTA T100 (RM449U)
INSTRUMENT PANEL
COMPONENTS

Downloaded from www.Manualslib.com manuals search engine BO0EL−03
N05924
N06045
N05919
BO−36
− BODYINSTRUMENT PANEL
1996 TOYOTA T100 (RM449U)
REMOVAL
1. REMOVE FRONT PILLAR GARNISH
2. REMOVE FRONT DOOR SCUFF PLATE
3. REMOVE COWL SIDE TRIM
4. REMOVE STEERING WHEEL
(See page SR−13)
5. REMOVE STEERING COLUMN COVER
6. REMOVE HOOD LOCK RELEASE LEVER
7. REMOVE LOWER FINISH PANEL NO. 1
8. REMOVE COMBINATION SWITCH
9. REMOVE GLOVE COMPARTMENT DOOR
10. REMOVE LOWER FINISH PANEL NO. 2
11. REMOVE LOWER CENTER COVER
12. w/ Sports seat:
REMOVE REAR CONSOLE BOX
13. REMOVE CENTER CLUSTER FINISH PANEL
HINT:
Tape a screwdriver tip before use.
(a) Remove the heater control knobs.
(b) Using a screwdriver, remove the panel.
(c) Remove the radio.
(d) Remove the heater control.
14. REMOVE CENTER CLUSTER FINISH LOWER PANEL
HINT:
Tape a screwdriver tip before use.
(a) Remove the 2 screws.
(b) Using a screwdriver, remove the panel, then disconnect
the connector.
(c) Remove the stereo opening cover.
15. REMOVE CLUSTER FINISH PANEL
(a) Remove the 5 screws.
(b) Remove the combination meter.
16. REMOVE REGISTER NO. 1
17. REMOVE DUCT HEATER TO REGISTER NO. 1
18. REMOVE DUCT HEATER TO REGISTER NO. 2
19. REMOVE GLOVE COMPARTMENT DOOR RE-
INFORCEMENT
20. REMOVE BRACE NO. 1 AND NO. 2