TOYOTA TACOMA 2004 Owners Manual (in English)

’04 Tacoma U (L/O 0309)
193
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
ASHTRAY
To use the ashtray, pull it out.
When finished with your cigarette, thor-
oughly extinguish it in the ashtray to pre-
vent other cigarette butts from catching
fire. After using the ashtray, push it back
in completely.
To remove the ashtray, press down on the
lock spring plate and pull out.
CAUTION
To reduce the chance of injury in
case of an accident or sudden stop
while driving, always completely close
the ashtray after use.
The power outlets are designed for
power supply for car accessories.
The key must be in the “ACC” or “ON”
position for the power outlets to be used.
NOTICE
To prevent the fuse from being
blown, do not use the electricity
over the total vehicle capacity of
12V/120W.
 To prevent the battery from being
discharged, do not use the power
outlets longer than necessary when
the engine is not running.
Close the power outlet lids when
the power outlets are not in use.
Inserting a foreign object other than
the appropriate plug that fits the
outlet, or allowing any liquid into
the outlet may cause electrical fail-
ure or short circuits.
Power outlets

’04 Tacoma U (L/O 0309)
194
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
To open the glove box door, pull the
lever.
On some models, the glove box light will
come on when the glove box is open with
the instrument panel lights on.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box door
closed while driving.
To use the box, do the following.
Pull up on the lock release lever and
open the lid.
This box is equipped with a coin holder
and a cassette tape holder.1. Coin holder: To use it, push coins down into the holder. The coin holder
is detachable.
To remove: Pull the coin holder straight
up.
To install: Push the coin holder straight
down.
2. Cassette tape holder: The dividing plate for the cassette tape holder is detach-
able.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the auxiliary box closed
while driving.
Glove box Auxiliary box
(xtracab models)

’04 Tacoma U (L/O 0309)
195
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
Upper box
Lower box
Rear box
UPPER BOX
To use the upper box, pull up on the
lock release lever and open the lid.
This box is equipped with a coin hold-
er. To use it, push coins down into the
holder. The coin holder is detachable.
To remove: Pull the coin holder straight
up.
To install: Push the coin holder straight
down.LOWER BOX
To use the lower box, rotate upper box
up until it is fully back, then pull up
the lock release lever, and open the lid.
REAR BOX
To use rear box, pull on the handle.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop
while driving, keep the upper box,
lower box and rear box closed when
it is not in use.
Rear console boxes

’04 Tacoma U (L/O 0309)
196
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
The cup holder is designed for holding
cups or drinkcans securely.
CAUTION
Do not place anything else other than
cups or drinkcans in the cup holder,
as such items may be thrown about
in the compartment and possibly in-
jure people in the vehicle during sud-
den braking or in an accident.
The cup holder is designed for holding
cups or drinkcans securely.
CAUTION
Do not place anything else other than
cups or drinkcans in the cup holder,
as such items may be thrown about
in the compartment and possibly in-
jure people in the vehicle during sud-
den braking or in an accident.
The cup holder is designed for holding
cups or drinkcans securely.
To use the second cup holder, pull it out.
CAUTION
Do not use the second cup holder
when you sliding the bench seat
(regular cab models) or move pas-
senger ’s seat for rear seat entry
(xtracab models). The seat may in-
terfere with second cup holder and
the drink may spill over the occu-
pants. If the spilled drink is hot, it
may cause burns.
Front cup holder (type A) Front cup holder (type B) Front cup holder (type C)

’04 Tacoma U (L/O 0309)
197
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
Do not place anything else other
than cups or drinkcans in the cup
holder, as such items may be
thrown about in the compartment
and possibly injure people in the
vehicle during sudden braking or in
an accident.
To reduce the chance of injury in
case of an accident or sudden stop
while driving, keep the second cup
holder closed when it is not in use.
NOTICE
Do not use the second cup holder
when you sliding the bench seat (reg-
ular cab models) or move passenger ’s
seat for rear seat entry (xtracab
model s). The seat may interfere with
the second cup holder and the spilled
drink may cause a malfunction on the
electrical components.
The cup holder is designed for holding
cups or drinkcans securely.
The cup holder adjusts to different sized
cups using its separator arms.
CAUTION
Do not use the cup holder when
you sliding the bench seat (regular
cab models) or move passenger ’s
seat for rear seat entry (xtracab
models). The seat may interfere
with the cup holder and the drink
may spill over the occupants. If the
spilled drink is hot, it may cause
burns.
Do not place anything else other
than cups or drinkcans in the cup
holder, as such items may be
thrown about in the compartment
and possibly injure people in the
vehicle during sudden braking or in
an accident.
To reduce the chance of injury in
case of an accident or sudden stop
while driving, keep the cup holder
closed when it is not in use.
NOTICE
Do not use the cup holder when you
sliding the bench seat (regular cab
models) or move passenger ’s seat for
rear seat entry (xtracab models). The
seat may interfere with the cup holder
and the spilled drink may cause a
malfunction on the electrical compo-
nents.
Front cup holder (type D)

’04 Tacoma U (L/O 0309)
198
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
The cup holder is designed for holding
cups fit securely.
To use the cup holder, raise the folding
table under the right−rear seat. Stand the
table by compressing and turning down
the table legs.
CAUTION
Do not place anything else other
than cups in the cup holder, as
such item may be thrown about in
the compartment and possibly in-
jure people in the vehicle during
sudden braking or an accident.
To reduce the chance of injury in
case of an accident or sudden stop
while driving, keep the cup holder
closed when it is not in use.
Rear cup holder
(xtracab models) Rear cup holder
(double cab models)

’04 Tacoma U (L/O 0309)
199
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
The cup holder is designed for holding
cups or drinkcans securely.
To use the cup holder, pull it out.
CAUTION
Do not place anything else other
than cups or drinkcans in the cup
holder, as such items may be
thrown about in the compartment
and possibly injure people in the
vehicle during sudden braking or in
an accident.
To reduce the chance of injury in
case of an accident or sudden stop
while driving, keep the cup holder
closed when it is not in use.You can use the rear seatback as a tem-
porary table only when the vehicle is
stopped.
To use the seatback table, fold the seat-
back down. (For detailed information, see
“Folding rear seatback” in Section 1−3.)
CAUTION
To avoid serious injury:
Do not set up the rear seatback
table while the vehicle is moving.
Do not sit on the seatback table.
NOTICE
To prevent damage to the seat, avoid
putting heavy loads on the temporary
table.
Seatback table

’04 Tacoma U (L/O 0309)
200
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
Use grocery bags
Use cargo net
The hooks are designed to hang things
like grocery bags and cargo nets, as
shown in the illustration.
Although the cargo net itself is not in-
cluded as an original equipment, these
cargo net hooks can be used to hang the
cargo net.
NOTICE
To prevent damage to the hook, avoid
hanging heavy loads on it.
Use a floor mat of the correct size.
If the floor carpet and floor mat have a
hole, then it is designed for use with a
locking clip. Fix the floor mat with locking
clip into the hole in the floor carpet.
Grocery bag and cargo net
hooks (double cab models)Floor mat

’04 Tacoma U (L/O 0309)
201
2004 TACOMA from Sep. ’03 Prod. (OM35814U)
CAUTION
Make sure the floor mat is properly
placed on the floor carpet. If the floor
mat slips and interferes with the
movement of the pedals during driv-
ing, it may cause an accident.
Valance panelLonger
tapping screws
Front license plate Shorter
tapping screws
Install the front license plate using the
following procedure:
1. Remove and discard the front license plate frame (if installed on the vehicle
at delivery).
2. Align the holes on the front license plate with the dimples on the valance
panel.
3. Install the two longer tapping screws through the upper holes, and the two
shorter tapping screws through the low-
er holes of the license plate, into the
dimples on the valance panel.
Do not drill holes in the dimples on the
valance panel. The 4 tapping screws are enclosed in a
plastic bag in the glove box. If your ve-
hicle was not equipped with the screws at
delivery, contact your Toyota dealer.
Installing front license plate
(fourwheel drive models and
Pre Runner)

’04 Tacoma U (L/O 0309)
202
2004 TACOMA from Sep. ’03 Prod. (OM35814U)