hood release TOYOTA TACOMA 2009 Owners Manual (in English)

19
Pictorial indexInstrument panel
Auxiliary box P. 302
Gauges and meters P. 150
Hood lock release lever P. 353
Tilt and telescopic steering
lock release lever
P. 62
Bottle holders P. 300
Parking brake pedal P. 148
Tire pressure warning
reset switch
P. 373
: Vehicles with an automatic transmission

353
4-3. Do-it-yourself maintenance
4
Maintenance and care
Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood release lever.
The hood will pop up slightly.
Pull up the hood catch lever
and lift the hood.

458 5-2. Steps to take in an emergency
■Overheating
If you observe the following, your vehicle may be overheating.
●The engine coolant temperature gauge enters the red zone or a loss of
power is experienced.
● Steam is coming from under the hood.
CAUTION
■To prevent an accident or injury when inspecting under the hood of
your vehicle
● If steam is seen coming from under the hood, do not open the hood until
the steam has subsided. The engine compartment may be very hot, caus-
ing serious injury such as burns.
● Keep hands and clothing away from the fan and other belts while the
engine is running.
● Do not loosen the radiator cap while the engine and radiator are hot.
Serious injury, such as burns, may result from hot coolant and steam
released under pressure.
NOTICE
■When adding engine coolant
Wait until the engine has cooled down before adding engine coolant.
When adding coolant, do so slowly. Adding cool coolant to a hot engine too
quickly can cause damage to the engine.

520
GAS STATION INFORMATION
STYPIAF008
Auxiliary catch leverP. 353Fuel filler doorP. 7 2
Tire inflation pressure
P. 475
Hood lock release lever P. 3 5 3
Fuel tank capacity 21.1 gal . (80.0 L, 17.6 lmp.gal.)
Fuel typeUnleaded gasoline, Octane Rating 87
(Research Octane Number 91) or higher
Cold tire inflation
pressure P. 4 7 5
Engine oil capacity
(Drain and refill)
P. 4 6 8
Engine oil typeToyota Genuine Motor Oil or equivalent
Oil grade: P. 468
ILSAC multigrade engine oil
Recommended oil viscosity: SAE 5W-20 or 0W-20 (2.7 L 4-cylinder
[2TR-FE] engine)
SAE 5W-30 (4.0 L V6 [1GR-FE] engine)