rear view mirror TOYOTA TACOMA 2019 Owners Manual (in English)

4
OVERVIEWInstrument cluster
For details, refer to “Indicators and warning lights,” Section 2, \
2019 Owner’s
Manual.
Speedometer
Fuel gauge
Odometer/trip meter
“ODO/TRIP” display switch and
instrument panel light control button
Engine coolant temperature gauge Outside temperature
Multi-Information Display (MID)
Shift position and shift range
(vehicles with an automatic transmission)
Tachometer
Blind Spot Monitor (BSM)
outside rear view mirror indicator5
Brake system warning1
Automatic Transmission fluid
temperature warning
Airbag SRS warning1
Anti-lock Brake System (ABS) warning1
Crawl control indicator5
Brake Override System warning lightAIR BAG ON/OFF indicators1
Charging system warning1AUTO Limited Slip Differential
(AUTO LSD) indicator1
Active traction control system indicator5
Automatic High Beam (AHB) indicator
Constant speed cruise control
idicator/Constant speed cruise
control SET indicator
1 If the indicator does not turn off within a few seconds of starting the \
engine, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner\
’s Manual.3 If the indicator flashes rapidly, there may be a malfunction. Refer to t\
he Owner’s Manual.4 If the indicator flashes, it indicates that the system is operating.5 If equipped.
Indicator symbols
Service indicators and reminders
142230_MY19_Tacoma_QRG_GUTS.indd 48/13/18 4:02 PM

22
Multi-Information Display (MID)
Moonroof (if equipped)
FEATURES & OPERATIONS
OpenTilt
CloseClose
Recommended driving position to
minimize wind noise.
Lightly press either side of the moonroof switch while opening/tilting is in pr\
ogress,
the moonroof stops partway. Push Multi-Information control switches to change information in the followi\
ng:
Push once to open partway;
again to open completely.Push once to open completely.
TILTING OPERATIONSLIDING OPERATION
AUTOMATIC AIR CONDITIONING (IF EQUIPPED)
MANUAL AIR CONDITIONING (IF EQUIPPED)
Display
Selectors and switches
“” and “” Press to select an item/change
pagesEnter/Set:
Press to enter/set,
press and hold to
reset
Return to
previous screen
Switch menus/Display top screen
Refer to your Owner’s Manual for complete details.Push “DISP” to scroll through the following:
Drive information
Navigation system-linked display (if equipped)
Vehicle information (if equipped) Audio system-linked display
Warning message display
Settings display
Temperature (driver’s side)
Outside rear view
mirror defogger
Outside rear view
mirror defogger
Automatic climate control ON
Adjusting the temperature setting
will cause the airflow vents, air intake and fan to adjust
automatically.
142230_MY19_Tacoma_QRG_GUTS.indd 228/13/18 4:06 PM

23
Multi-Information Display (MID)
Moonroof (if equipped)
Air conditioning/heating
Lightly press either side of the moonroof switch while opening/tilting i\
s in progress,
the moonroof stops partway. Push Multi-Information control switches to change information in the fol\
lowing:
AUTOMATIC AIR CONDITIONING (IF EQUIPPED)
MANUAL AIR CONDITIONING (IF EQUIPPED)
Display
Selectors and switches
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES “ ” and “ ” Press to select an item/change
pages
Switch menus/Display top screen
Refer to your Owner’s Manual for complete details. Drive information
Navigation system-linked display (if equipped)
Temperature (Driver and passenger)
Temperature (driver’s side) Outside rear view
mirror defogger
Outside rear view
mirror defogger
Automatic climate control ON
Adjusting the temperature setting
will cause the airflow vents,
air intake and fan to adjust
automatically.
Indicator ON: Synchronized
temperature settings for driver,
front passenger. Indicator OFF:
Separate temperature settings for
driver, front passenger.
Air Conditioning ON/OFF
Use outside air to quickly cool
interior, then change to recirculate
for cooler air.
Air Conditioning ON/OFF
Use outside air to quickly cool
interior, then change to recirculate
for cooler air. Temperature (passenger’s side)
Temperature
(Driver and passenger)
Airflow vent mode select
Airflow vent mode select
Windshield defogger (outside air only) Recirculate cabin air (outside air when OFF)
Recirculate cabin air
(outside air when OFF)
Airflow vent adjuster
In “
/” or “” mode, use outside air
(“” indicator OFF) to reduce window fogging.
Recirculate cabin air (outside air when OFF) Fan speed
Fan speed
Fan OFF Air flow vent
142230_MY19_Tacoma_QRG_GUTS.indd 238/13/18 4:06 PM

26
Active traction control (if equipped)
TRAC/VSC OFF switch
Rear differential lock (if equipped)
FEATURES & OPERATIONS
The active traction control system automatically helps prevent the spinning\
of four
wheels when the vehicle is started or accelerated on slippery road surfaces.
Refer to the Owner’s Manual for more information.
Use ONLY when wheel spinning occurs in a ditch, or on slippery or unpaved
surfaces. DO NOT USE THE REAR DIFFERENTIAL LOCK IN CONDITIONS
OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL. UNLOCK THE
DIFFERENTIAL ONCE THE VEHICLE MOVES OUT OF THE TROUBLE SPOT.
Refer to your Owner’s Manual for complete details on this system before at\
tempting
to use it.
The TRAC OFF switch is used to switch between modes related to the TRAC, VS\
C
and Auto LSD functions.
Refer to the Owner’s Manual for limitations and more information.
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink
® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the deci\
sion when changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing\
up)
The system is designed to use radar sensors to detect vehicles traveling in\
the
Tacoma’s blind spot and advises the driver of the vehicles’ presence via the
outside rear view mirror indicators.
*Rear Cross Traffic Alert function only.
Refer to the Owner‘s Manual for limitations and more details on this syste\
m before
attempting to use it.
Outside rear view
mirror indicators
142230_MY19_Tacoma_QRG_GUTS.indd 268/13/18 4:06 PM

27
Garage door opener (HomeLink®*) (if equipped)
The active traction control system automatically helps prevent the spinning\
of four wheels when the vehicle is started or accelerated on slippery road surfaces.
Refer to the Owner’s Manual for more information.
Use ONLY when wheel spinning occurs in a ditch, or on slippery or unpaved
surfaces. DO NOT USE THE REAR DIFFERENTIAL LOCK IN CONDITIONS
OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL. UNLOCK THE
DIFFERENTIAL ONCE THE VEHICLE MOVES OUT OF THE TROUBLE SPOT.
Refer to your Owner’s Manual for complete details on this system before at\
tempting

to use it.
The TRAC OFF switch is used to switch between modes related to the TRAC, VS\
C

and Auto LSD functions.
Refer to the Owner’s Manual for limitations and more information.
Garage door openers manufactured under license from HomeLink®* can be

programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink
® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the deci\
sion when changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing\
up)
The system is designed to use radar sensors to detect vehicles traveling in\
the
Tacoma’s blind spot and advises the driver of the vehicles’ presence via the
outside rear view mirror indicators.
*Rear Cross Traffic Alert function only.
Refer to the Owner‘s Manual for limitations and more details on this syste\
m before
attempting to use it.
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
(if equipped)
BSM main switch HomeLink
® indicator light
Garage door operation
indicators Buttons
Outside rear view
mirror indicators Rear Cross Traffic
Alert buzzer*
Outside rear view
mirror indicators
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
142230_MY19_Tacoma_QRG_GUTS.indd 278/13/18 4:07 PM

30
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt
to test the operation of the pre-collision system yourself, as the syste\
m may not
operate or engage, possibly leading to an accident. In some situations, \
such as
when driving in inclement weather such as heavy rain, fog, snow or a san\
dstorm or
while driving on a curve and for a few seconds after driving on a curve,\
a vehicle
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.Refer to a Toyota Owner’s Manual for additional information on PCS w/\
PD operation,
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\
nformation
Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional
braking force using Brake Assist. This system may prime the brakes and m\
ay apply
greater braking force in relation to how strongly the brake pedal is dep\
ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the
possibility of a frontal collision with a preceding vehicle is extremely\
high, the
system may automatically apply the brakes, reducing speed in order to he\
lp the
driver reduce the impact and in certain cases avoid the collision.
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \
view mirror
and a millimeter-wave radar mounted in the front grill. These sensors su\
pport the
driver assist systems.
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ P (TSS-P) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic si\
tuations, in
certain conditions. TSS-P is designed to help support the driver’s aw\
areness,
decision making and vehicle operation contributing to a safe driving exp\
erience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
Automatic High Beams (AHB)AHB is designed to detect the headlights of oncoming vehicles and the ta\
il
lights of preceding vehicles and switch between high beams and low beams\

as appropriate. Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to
work with the camera sensor to help recognize a preceding pedestrian,
and provide an alert, mitigation and/or avoidance support in certain
conditions.
Dynamic Radar Cruise Control (DRCC)
DRCC is designed to help maintain a pre-set distance to a preceding vehi\
cle
when the preceding vehicle is traveling at a lower speed.
Lane Departure Alert (LDA)
LDA is designed to provide notification when the system detects an
unintended lane departure.
Camera sensor
Radar sensor
142230_MY19_Tacoma_QRG_GUTS.indd 308/13/18 4:07 PM

31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt
to test the operation of the pre-collision system yourself, as the syste\
m may not
operate or engage, possibly leading to an accident. In some situations, \
such as
when driving in inclement weather such as heavy rain, fog, snow or a san\
dstorm or
while driving on a curve and for a few seconds after driving on a curve,\
a vehicle
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/\
PD operation,
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\
nformation
Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional
braking force using Brake Assist. This system may prime the brakes and m\
ay apply
greater braking force in relation to how strongly the brake pedal is dep\
ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the
possibility of a frontal collision with a preceding vehicle is extremely\
high, the
system may automatically apply the brakes, reducing speed in order to he\
lp the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection (PCS w/PD)
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \
view mirror
and a millimeter-wave radar mounted in the front grill. These sensors su\
pport the
driver assist systems.
Toyota Safety Sense
™ P (TSS-P) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic si\
tuations, in
certain conditions. TSS-P is designed to help support the driver’s aw\
areness,
decision making and vehicle operation contributing to a safe driving exp\
erience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
Automatic High Beams (AHB)AHB is designed to detect the headlights of oncoming vehicles and the ta\
il
lights of preceding vehicles and switch between high beams and low beams\

as appropriate. Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to
work with the camera sensor to help recognize a preceding pedestrian,
and provide an alert, mitigation and/or avoidance support in certain
conditions.
Dynamic Radar Cruise Control (DRCC)
DRCC is designed to help maintain a pre-set distance to a preceding vehi\
cle
when the preceding vehicle is traveling at a lower speed.
Lane Departure Alert (LDA)
LDA is designed to provide notification when the system detects an
unintended lane departure.
142230_MY19_Tacoma_QRG_GUTS.indd 318/13/18 4:07 PM