stop start TOYOTA TACOMA 2020 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2020, Model line: TACOMA, Model: TOYOTA TACOMA 2020Pages: 52, PDF Size: 5.97 MB
Page 4 of 52

2
OVERVIEWInstrument panel
Steering wheel controls
Dynamic Radar
Cruise Control (DRCC)
Vehicle-to-vehicle
distance switch
Lane Departure Alert
(LDA) switch Dynamic Radar Cruise
Control (DRCC)/Cruise
control switch
Multi-Information Display (MID)
Meters
Bird’s Eye View Camera ON/OFF switch
4
VSC OFF switch
Meter control switches1
Headlight/turn signal/front fog1 light control
Audio remote control
switches
4Voice command switch4
Windshield wiper and washer control
“ENGINE START STOP” button (Smart Key)
1
Tilt and telescopic steering lock release lever
(below the steering wheel)
Hood lock release lever
Clutch start cancel switch
2
Automatic High Beam switch
Power outlet main switch1
Cargo lamp main switch1
Tire Pressure Monitoring (warning) System (TPMS) reset switch
Ignition switch
1
Parking brake
Telephone control
switches4 1
If equipped.2 Manual transmission only.3 Automatic transmission only.4 For details, refer to the “Navigation and Multimedia System Owner’s Manual” or visit www.toyota.com/
audio-multimedia for additional resources.
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 28/16/19 5:52 AM
Page 5 of 52

3
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Dynamic Radar
Cruise Control (DRCC)
Vehicle-to-vehicle
distance switch
Dynamic Radar Cruise
Control (DRCC)/Cruise
control switch
Meter control switches1
Audio/navigation1 system4
Qi Wireless charger switch1
Power mode switch3
Blind Spot Monitor (BSM)
main switch1
“ENGINE START STOP” button (Smart Key)1
Intuitive parking assist switch1
Powerback window switch1USB media port
Parking brake Shift lever Four-wheel drive control switch
1
Air conditioning/heating controls
Emergency flasher switch
1 If equipped.2 Manual transmission only.3 Automatic transmission only.4 For details, refer to the “Navigation and Multimedia System Owner’\
s Manual” or visit www.toyota.com/
audio-multimedia for additional resources.
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 38/16/19 5:52 AM
Page 8 of 52

6
Smart Key Smart Key
OVERVIEW
Keyless entry
(if equipped)
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will
relock for safety.
Smart Key
Push
Push
Carry Smart Key remote
All-door lock Carry Smart
Key remote
Grasp
Front door unlock*
ONCE: Driver door
TWICE: All doors
Touch
Push and hold
UNLOCKING OPERATION
LOCKING OPERATION
PANIC BUTTON
* Driver door unlocking function can be programmed to unlock driver door \
only, or all doors. Grasping front passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Without depressing the brake pedal, pressing the engine switch will change the
operation mode in succession from:
POWER (WITHOUT STARTING ENGINE)
START FUNCTION
NOTE: The Smart Key must be carried to enable the start function. With the
gear shift lever in Park and the brake pedal depressed, push the “ENGINE
START STOP” switch.
Turn to open
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 68/16/19 5:36 AM
Page 9 of 52

7
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will
relock for safety.
All-door lock
Front door unlock*
* Driver door unlocking function can be programmed to unlock driver door\
only, or
all doors. Grasping front passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Without depressing the brake pedal, pressing the engine switch will chan\
ge the
operation mode in succession from:
POWER (WITHOUT STARTING ENGINE)
START FUNCTION
Smart Key system (if equipped)
NOTE: The Smart Key must be carried to enable the start function. With the
gear shift lever in Park and the brake pedal depressed, push the “ENGINE
START STOP” switch.
Off - All systems OFF. Emergency flashers can be used.
Accessory – Some electrical components can be used.
On - All electrical components can be used.
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 78/16/19 5:36 AM
Page 22 of 52

20
FEATURES & OPERATIONS
Connecting a compatible device and cable into the USB media port will su\
pport
charging and music playback through the audio multimedia system.
The engine switch must be in the “ACC” or “ON” position (wi\
thout Smart Key) /
“ACCESSORY” or ”IGNITION ON” mode (with Smart Key) for use\
.
USB media port
USB charge-ports
(Charge-only)
A mobile device can be charged wirelessly on the tray. (1) Press the wireless
charger power switch. (2) Place a compatible mobile device on the tray as shown
in the illustration. An amber indicator illuminates while charging is in\
progress.
When charging is complete, the indicator illuminates green. Some phones,\
cases or
cover type wireless chargers may not cause the green indicator to illumi\
nate even
though it is fully charged.
Refer to the Owner’s Manual for limitations and more details on this \
system before
attempting to use it.
Charging can only be performed with the engine switch in the “ACC”\
or “ON”
position (without Smart Key)/ ACCESSORY or IGNITION ON mode (with Sma\
rt Key)
and only on mobile devices with the “
” logo.
Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or\
turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-Doors lock when the vehicle speed is approximately 12 mph or higher.
Driver’s door linked door unlocking function
-(Without a Smart Key) Doors unlock when the driver’s door is opened\
within 10 seconds after turning the ignition switch to the “LOCK” position. \
-(With a Smart Key) Doors unlock when the driver’s door is opened w\
ithin 10 seconds after turning the “ENGINE START STOP” switch OFF.
Refer to the Owner’s Manual for more details.
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 208/16/19 5:41 AM
Page 23 of 52

21
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Connecting a compatible device and cable into the USB media port will su\
pport
charging and music playback through the audio multimedia system.
The engine switch must be in the “ACC” or “ON” position (wi\
thout Smart Key) /
“ACCESSORY” or ”IGNITION ON” mode (with Smart Key) for use\
.
USB media portQi Wireless charger (if equipped)
USB charge-ports
A mobile device can be charged wirelessly on the tray. (1) Press the wireless
charger power switch. (2) Place a compatible mobile device on the tray as shown
in the illustration. An amber indicator illuminates while charging is in\
progress.
When charging is complete, the indicator illuminates green. Some phones,\
cases or
cover type wireless chargers may not cause the green indicator to illumi\
nate even
though it is fully charged.
Refer to the Owner’s Manual for limitations and more details on this \
system before
attempting to use it.
Charging can only be performed with the engine switch in the “ACC”\
or “ON”
position (without Smart Key)/ ACCESSORY or IGNITION ON mode (with Sma\
rt Key)
and only on mobile devices with the “
” logo.
Place device nearest the center of charging area for
best results. Moving device may result in stopping
or restarting the charging process.
(1)
Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or\
turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-Doors lock when the vehicle speed is approximately 12 mph or higher.
Driver’s door linked door unlocking function
-(Without a Smart Key) Doors unlock when the driver’s door is opened\
within 10 seconds after turning the ignition switch to the “LOCK” position. \
-(With a Smart Key) Doors unlock when the driver’s door is opened w\
ithin 10 seconds after turning the “ENGINE START STOP” switch OFF.
Refer to the Owner’s Manual for more details.
Press
Place(2)
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 218/16/19 5:41 AM
Page 46 of 52

44
Star Safety System™
SAFETY & EMERGENCY FEATURES
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-
lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force\
Distribution
(EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Ve\
hicle Stability
Control (VSC).
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
There are two types of Toyota floor mats: carpeted and all-weather. Each\
vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep\
the mat in place.
• Install floor mats right side up.
VEHICLE STABILITY CONTROL (VSC)
VSC helps prevent loss of traction during cornering by reducing engine p\
ower and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle i\
s traveling.
When it senses that the front or rear wheels begin to lose traction, VSC\
reduces
engine power and applies braking to selected wheels. This helps restore \
traction
and vehicle control.
ANTI-LOCK BRAKE SYSTEM (ABS)
Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD\
) to help
maintain control and balance when braking. EBD responds to sudden stops \
by
redistributing brake force to enhance the braking effectiveness of all f\
our wheels.
SMART STOP TECHNOLOGY (SST)
Smart Stop Technology automatically reduces engine power when the accele\
rator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are a\
pplied
firmly for longer than one-half second at speeds greater than five miles\
per hour.
SST doesn’t engage if the brake pedal is depressed before the acceler\
ator pedal,
allowing vehicles to start on a steep hill and safely accelerate without\
rolling
backward.
TRACTION CONTROL (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine p\
ower, and
Traction Control helps maintain traction on loose gravel and wet, icy, o\
r uneven
surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. \
This
transfers power to the wheels that still have traction to help keep you \
on track.
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 448/16/19 6:27 AM
Page 47 of 52

45
Star Safety System™
Floor mat installation
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-
lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force\
Distribution
(EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Ve\
hicle Stability
Control (VSC).
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
There are two types of Toyota floor mats: carpeted and all-weather. Each\
vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep\
the mat in place.
• Install floor mats right side up.
Always align the Δ marks
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
VSC helps prevent loss of traction during cornering by reducing engine p\
ower and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle i\
s traveling.
When it senses that the front or rear wheels begin to lose traction, VSC\
reduces
engine power and applies braking to selected wheels. This helps restore \
traction
and vehicle control.
Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD\
) to help
maintain control and balance when braking. EBD responds to sudden stops \
by
redistributing brake force to enhance the braking effectiveness of all f\
our wheels.
Smart Stop Technology automatically reduces engine power when the accele\
rator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are a\
pplied
firmly for longer than one-half second at speeds greater than five miles\
per hour.
SST doesn’t engage if the brake pedal is depressed before the acceler\
ator pedal,
allowing vehicles to start on a steep hill and safely accelerate without\
rolling
backward.
TRACTION CONTROL (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine p\
ower, and
Traction Control helps maintain traction on loose gravel and wet, icy, o\
r uneven
surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. \
This
transfers power to the wheels that still have traction to help keep you \
on track.
MY20_Tacoma_QRG_V3_ML_0812_Guts.indd 458/16/19 6:27 AM