seat memory TOYOTA tC 2006 Owners Manual (in English)

30
—Adjusting front seats
13T001
1. SEAT POSITION ADJUSTING LEVER
Hold the center of the lever and pull it
up. Then slide the seat to the desired
position with slight body pressure and
release the lever.
2. SEAT CUSHION ANGLE ADJUSTING KNOB (for driver’s seat only)
Turn the knob either way.
3. SEAT HEIGHT ADJUSTING LEVER (for driver ’s seat only)
To change the height of the seat, pull
up or push down the lever. 4. SEATBACK ANGLE ADJUSTING LEVER
Lean forward and pull the lever up.
Then lean back to the desired angle
and release the lever.CAUTION
Avoid reclining the seatback any
more than needed. The seat belts pro-
vide maximum protection in a frontal
or rear collision when the driver and
the front passenger are sitting up
straight and well back in the seats. If
you are reclined, the lap belt may
slide past your hips and apply re-
straint forces directly to the abdomen
or your neck may contact the shoul-
der belt. In the event of a frontal
collision, the more the seat is re-
clined, the greater the risk of death
or personal injury.
5. SEATBACK LOCK RELEASE LEVER
Lift up the lever. The seat with the
seatback folded down will release the
slide lock and slide forward.
Driver ’s seat only:
The seatback lock release lever is
equipped with the seat position memory
function. For details, see “—Moving
front seats for rear seat entry” on page
31.

31
13T073
Driver’s seat
Front passenger’s seat
or
or
Driver ’s seat:
For easy access to the rear seat, use
either a seatback lock release lever or
seatback angle adjusting lever.
If the seatback lock release lever is
used, the driver’s seat can be returned
to its previous position.
Using the seatback lock release lever
(2)— 1. Lift up the seatback lock release lever.
The front seat with the seatback folded
down will release the slide lock and slide
forward. 2. Move the seat to the front–most posi- tion.
The seatback angle adjusting lever (1)
cannot be operated while the seatback
lock release lever (2) is being used.
After rear passengers are in, slide the
seat backward and then lift up the seat-
back. The seat will be set and locked to
its previous position automatically. If the
seat cannot be slided back to the previous
position due to the rear passenger or lug-
gage, the seat will be locked in that posi-
tion, disabling the seat position memory
system. To recall the previous position, lift up the
seatback lock release lever after removing
the luggage, or letting him or her get out
or sit properly so that the seat can be
slided back to the previous position. How-
ever, if you once slide the seat to the
rear–most position instead of lifting up the
seatback lock release lever, the seat can
be slided and locked in the original posi-
tion.
Using the seatback angle adjusting le-
ver (1)—
1. Lift up the seatback angle adjusting lever.
The front seat with the seatback folded
down will release the slide lock and slide
forward. 2. Move the seat to the front–most posi- tion.
The seatback lock release lever (2) can-
not be operated while the seatback angle
adjusting lever (1) is being used.
After rear passengers are in, return the
seat to the previous position and lift up
the seatback. The seat will be locked in
the previous position but the seatback in
the original position.
—Moving front seats for rear
seat entry