4WD TOYOTA TERCEL 1985 Service Manual

BR.4OBRAKE SYSTEM - Rear Brake (Wagon 4WD)
6. INSTALL PARKING BRAKE LEVER AND AUTOMATIC
ADJUSTING LEVER TO REAR SHOE
(a) Temporarily installthe levers and the shim and a new
C-washer.
(d Using a feeler gauge, measure the clearance between
the shoe and lever.
Standard clearance: O - 0.35 mm (O - 0.0138 in.)
lf not within specification, adjust with a shim.
Shim thicknesses mm (in.)
0.2 (o.oo8) | 0.5 (0.020)
o.3 (0.012) I 0.6 (0.024)
o.4 (0.016) I o.s (0.035)
(c) Using pliers, stake the C-washer.
7.INSTALL STRUT ONTO REAR SHOE
Set the strut and return spring in place
adjusting lever spring.
and install the
Left-hand ThreadsRight-hand Threads
pVe
Front
f
Front
+
Left WheelRight Wheel
8RO256 8R0257

BRAKE SYSTEM - Rear Brake (Wagon 4WD)8R.41
8. INSTALL REAR SHOE
CAUTION: Do not allow oil or grease to get on the
rubbing face.
H Using pliers, connect the parking brake cable to the
lever.
(b) Set the rear shoe in place with the end of the shoe
inserted in the wheel cylinder and the other end in the
anchor plate.
(c) lnstall the pin and the shoe hold-down spring.
9. INSTALL FRONT SHOE
CAUTION: Do not allow oil or grease to get on the
rubbing face.
(a) Install the anchor spring between the front and rear
shoes.
(b) Set the front shoe in place with the end of the shoe
inserted in the wheel cylinder and the strut in place.
(c) Install the shoe hold-down spring and pin.
(d) Using SST, connect the return spring.
ssr 09703-30010
10. CHECK OPERATION OF AUTOMATIC ADJUSTER
MECHANISM
(a) Move the parking brake lever of the rear shoe back
and forth, as shown. Check that the adjusting bolt
turns.
lf the bolt does not turn, check for incorrect installation of
the rear brakes.