light TOYOTA TERCEL 1996 Service Repair Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 1996, Model line: TERCEL, Model: TOYOTA TERCEL 1996Pages: 1202, PDF Size: 17.43 MB
Page 1004 of 1202
- BODY ELECTRICALBODY ELECTRICAL SYSTEM
BE-3
1996 TERCEL (RM440U)
CANADA:
HEADLIGHT AND TAILLIGHT SYSTEM
TroubleParts nameSee page
ºLight-on warning systemº does not operate.
1. Integration Relay (I/P J/B)
2. DOME Fuse (Engine Room R/B)
3. GAUGE Fuse (I/P J/B)
4. TAIL Fuse (I/P J/B)
5. CIG/RAD Fuse (I/P J/B)
6. Wire Harness
7. Door Courtesy SwitchBE-16
-
-
-
-
-
BE-38
Only one side headlight does not light up.1. Headlight Bulb
2. Wire Harness-
-
ºLo-Beamº does not light up. (ALL)1. Headlight Control Relay (Engine Room R/B)
2. Wire HarnessBE-16
-
ºLo-Beamº does not light up. (ONE SIDE)
1. HEAD LH-LWR Fuse (R/B No.5)
2. HEAD RH-LWR Fuse (R/B No.5)
3. Headlight Bulb
4. Wire Harness-
-
-
-
ºHi-Beamº does not light up. (ALL)
1. DRL Fuse (Engine Room R/B)
2. Headlight Dimmer Switch
3. D.R.L. Main Relay
4. D.R.L. No.4 Relay (R/B No.5)
5. Daytime Resistor
6. Wire Harness-
BE-16
BE-16
BE-16
BE-16
-
ºHi-Beamº does not light up. (ONE SIDE)
1. HEAD LH-UPR Fuse (R/B No.5)
2. HEAD RH-UPR Fuse (R/B No.5)
3. Headlight Bulb
4. Wire Harness-
-
-
-
ºFlashº does not light up.
1. DRL Fuse (Engine Room R/B)
2. Headlight Dimmer Switch
3. D.R.L. Main Relay
4. D.R.L. No.4 Relay (R/B No.5)
5. Daytime Resistor
6. Wire Harness-
BE-16
BE-16
BE-16
BE-16
-
Headlight does not light up. (Taillight is normal)
1. Headlight Control Relay (Engine Room R/B)
2. D.R.L. Main Relay
3. D.R.L. No.4 Relay (R/B No.5)
4. Daytime Resistor
5. Headlight Dimmer Switch
6. Light Control Switch
7. Headlight Bulb
8. Wire HarnessBE-16
BE-16
BE-16
BE-16
BE-16
BE-16
-
-
Headlight does not light up. (Taillight does not light up)
1. D.R.L. Main Relay
2. D.R.L. No.4 Relay (R/B No.5)
3. Daytime Resistor
4. Light Control Switch
5. Headlight Bulb
6. Wire HarnessBE-16
BE-16
BE-16
BE-16
-
-
Only one side taillight does not light up.1. Taillight Bulb
2. Wire Harness-
-
Taillight does not light up.
(Headlight is normal)
1. TAIL Fuse (I/P J/B)
2. Taillight Control Relay (I/P J/B)
3. Light Control Switch
4. Headlight Bulb
5. Wire Harness-
BE-16
BE-16
-
-
Page 1005 of 1202
BE-4
- BODY ELECTRICALBODY ELECTRICAL SYSTEM
1996 TERCEL (RM440U) Taillight does not light up. (Headlight does not light up)
1. Light Control Switch
2. Headlight Bulb
3. Wire HarnessBE-16
-
-
Headlight does not light up with light control SW in HEAD.
1. Light Control Switch
2. D.R.L. Main Relay
3. D.R.L. No.4 Relay (R/B No.5)
4. Daytime Resistor
5. Wire HarnessBE-16
BE-16
BE-16
BE-16
-
Headlight does not go out with light control SW in OFF.1. Headlight Control Relay (Engine Room R/B)
2. Wire HarnessBE-16
-
Taillight does not light up with light control SW in TAIL.
1. Taillight Control Relay (I/P J/B)
2. Light Control Switch
3. Wire HarnessBE-16
BE-16
-
Taillight does not go out with light control SW in OFF.
1. Taillight Control Relay (I/P J/B)
2. Light Control Switch
3. Wire HarnessBE-16
BE-16
-
Headlight do not light up with engine running and light control SW
in OFF.
1. DOME Fuse (Engine Room R/B)
2. ECU-IG Fuse (I/P J/B)
3. DRL Fuse (Engine Room R/B)
4. D.R.L. Main Relay
5. D.R.L. No.4 Relay (R/B No.5)
6. Daytime Resistor
7. Wire Harness
8. Generator L Terminal
9. Parking Brake Switch
10.Brake Fluid Level Warning Switch-
-
-
BE-16
BE-16
BE-16
-
-
BE-38
BE-38
TURN SIGNAL AND HAZARD WARNING SYSTEM
TroubleParts nameSee page
ºHazardº and ºTurnº do not light up.
1. Hazard Warning Switch
2. Turn Signal Flasher
3. Wire HarnessBE-22
BE-22
-
No of blinks for Hazard.
(Turn is abnormal)1. Bulb
2. Turn Signal Flasher
3. Wire Harness-
BE-22
-
Hazard warning light does not light up.
(Turn signal is normal)1. HAZ-HORN Fuse (Engine Room R/B)
2. Wire Harness-
-
Hazard waning light does not light up in one direction.1. Hazard Warning Switch
2. Wire HarnessBE-22
-
Turn signal does not light up.
(Combination meter, wiper and washer do not operate.)
1. Ignition Switch
2. TURN Fuse (Engine Room R/B)
3. Turn Signal Switch
4. Wire HarnessBE-1 1
-
BE-22
-
Turn signal does not light up.
(Combination meter, wiper and washer are normal.)1. TURN Fuse (Engine Room R/B)
2. Turn Signal Switch
3. Wire Harness-
BE-22
-
Page 1006 of 1202
- BODY ELECTRICALBODY ELECTRICAL SYSTEM
BE-5
1996 TERCEL (RM440U)
INTERIOR LIGHT SYSTEM
TroubleParts nameSee page
Room light does not light up.
1. DOME Fuse (Engine Room R/B)
2. Room Light Switch
3. Door Courtesy Switch
4. Wire Harness
5. Bulb-
BE-24
BE-38
-
-
Room light always remains on.
1. Room Light Switch
2. Door Courtesy Switch
3. Wire HarnessBE-24
BE-38
-
BACK-UP LIGHT SYSTEM
TroubleParts nameSee page
Back-up Light does not light up.
1. GAUGE Fuse (I/P J/B)
2. Ignition Switch
3. Park/Neutral Position Switch (A/X)
4. Back-up Light Switch (M/X)
5. Wire Harness
6. Bulb-
BE-1 1
AX-2
AX-2
BE-26
-
-
Back-up light always remains on.1. Wire Harness-
Only one light does not light up.1. Bulb
2. Wire Harness-
-
STOP LIGHT SYSTEM
TroubleParts nameSee page
Stop light does not light up.
1. STOP Fuse (I/P J/B)
2. Stop Light Switch
3. Bulb
4. Wire Harness-
BE-28
-
-
Stop light always remains on.1. Stop Light Switch
2. Wire HarnessBE-28
-
Only one light does not light up.1. Bulb
2. Wire Harness-
-
WIPER AND WASHER SYSTEM
TroubleParts nameSee page
Wiper and washers do not operate.
1. WIPER Fuse (I/P J/B)
2. Wiper Switch
3. Wiper Motor
4. Wire Harness-
BE-30
BE-30
-
Wipers do not operate in LO, HI or MIST.
1. Wiper Switch
2. Wiper Motor
3. Wire HarnessBE-30
BE-30
-
Wipers do not operate in INT.
1. Wiper Switch
2. Wiper Motor
3. Wire HarnessBE-30
BE-30
-
Washer motor does not operate.
1. Washer Switch
2. Washer Motor
3. Wire HarnessBE-30
BE-30
-
Wipers do not operate when washer switch in ON.1. Washer Motor
2. Wire HarnessBE-30
-
Page 1007 of 1202
BE-6
- BODY ELECTRICALBODY ELECTRICAL SYSTEM
1996 TERCEL (RM440U) Washer fluid does not operate.
1. Washer Hose and Nozzle-
At wiper switch HI position, the wiper blade is in contact with the
body.
When the wiper switch is OFF, the wiper blade does not retract
or the retract position is wrong.
1. *1 Wiper Switch
2. Wire harnessBE-30
-
*1: Inspect wiper arm and blade set position
COMBINATION METER (METER, GAUGES AND ILLUMINATION)
TroubleParts nameSee page
Tachometer, Fuel Gauge and Engine Coolant Temperature Gauge
do not operate.3. GAUGE Fuse (Engine Room R/B)
4. Meter Circuit
5. Wire Harness-
BE-35
-
Speedometer does not operate.
1. Vehicle Speed Sensor
2. Meter Circuit
3. Wire HarnessBE-38
BE-35
-
Tachometer does not operate.
1. Igniter
2. ECM
3. Meter Circuit
4. Wire Harness-
-
BE-35
-
Fuel Gauge does not operate or operate abnormally.
1. Fuel Receiver Gauge
2. Fuel Sender Gauge
3. Meter Circuit
4. Wire HarnessBE-38
BE-38
BE-35
-
Engine Coolant Temperature Gauge does not operate or operate
abnormally.
1. Engine Coolant Temperature Receiver Gauge
2. Engine Coolant Temperature Sender Gauge
3. Meter Circuit
4. Wire HarnessBE-38
BE-38
BE-35
-
All illumination lights do not light up.
1. TAIL Fuse (I/P J/B)
2. Light Control Rheostat
3. Meter Circuit
4. Wire Harness-
BE-38
BE-35
-
Only one illumination light does not light up.1. Bulb
2. Meter Circuit-
BE-35
COMBINATION METER (WARNING LIGHTS)
TroubleParts nameSee page
Warning lights do not light up.
(Except Discharge, SRS and Door Open)
1. Bulb
2. GAUGE Fuse (I/P J/B)
3. Ignition Switch
4. Meter Circuit
5. Wire Harness-
-
BE-1 1
BE-35
-
Brake Warning Light does not light up.
1. Bulb
2. Brake Fluid Level Warning Switch
3. Parking Brake Switch
4. Bulb Check Relay
5. Meter Circuit
6. Wire Harness-
BE-38
BE-38
-
BE-35
-
Seat Belt Warning Light does not light up.
1. Bulb
2. Seat Belt Retractor Switch
3. Integration Relay
4. Meter Circuit
5. Wire Harness-
BE-38
BE-38
BE-35
-
Page 1008 of 1202
- BODY ELECTRICALBODY ELECTRICAL SYSTEM
BE-7
1996 TERCEL (RM440U) Fuel Level Warning Light does not light up.
1. Bulb
2. Fuel Level Warning Switch
3. Meter Circuit
4. Wire Harness-
BE-38
BE-35
-
Low Oil Pressure Warning Light does not light up.
1. Bulb
2. Low Oil Pressure Warning Switch
3. Meter Circuit
4. Wire Harness-
BE-38
BE-35
-
Door Open Warning Light does not light up.
1. Bulb
2. DOME Fuse (Engine Room R/B)
3. Door Courtesy Switch
4. Meter Circuit
5. Wire Harness-
-
BE-38
BE-35
-
Discharge Warning Light does not light up.
1. Bulb
2. IGN Fuse (I/P J/B)
3. Generator
4. Meter Circuit
5. Wire Harness-
-
-
BE-35
-
COMBINATION METER (INDICATOR LIGHTS)
TroubleParts nameSee page
SRS Indicator Light does not light up.
1. Bulb
2. Wire Harness
3. Airbag Sensor Assembly-
-
DI-146
ABS Indicator Light does not light up.
1. Bulb
2. Wire Harness
3. ABS ECU-
-
DI-109
Malfunction Indicator Light does not light up.
1. Bulb
2. ECM
3. Wire Harness-
-
-
O/D OFF Indicator Light does not light up.
1. Bulb
2. O/D Main Switch
3. ECM
4. Meter Circuit
5. Wire Harness-
-
-
BE-35
-
Turn Indicator Light does not light up.
1. Bulb
2. Turn Signal and Hazard Warning System
3. Meter Circuit
4. Wire Harness-
BE-21
BE-35
-
High Beam Indicator Light does not light up.
1. Bulb
2. Headlight System
3. Meter Circuit
4. Wire Harness-
BE-13
BE-35
-
Security Indicator Light does not light up.
1. Bulb
2. Theft Deterrent System
3. Meter Circuit
4. Wire Harness-
DI-215
BE-35
-
Page 1009 of 1202
BE-8
- BODY ELECTRICALBODY ELECTRICAL SYSTEM
1996 TERCEL (RM440U)
DEFOGGER SYSTEM
TroubleParts nameSee page
Rear window defogger does not operate.
(w/Timer)
1. DEF M-Fuse (I/P J/B)
2. GAUGE Fuse (I/P J/B)
3. Defogger Switch
4. Defogger Relay
5. Defogger Wire
6. Wire Harness-
-
BE-46
BE-46
BE-46
-
Rear window defogger does not operate.
(w/o Timer)
1. DEF M-Fuse (I/P J/B)
2. Defogger Switch
3. Defogger Wire
4. Wire Harness-
BE-46
BE-46
-
POWER WINDOW CONTROL SYSTEM
TroubleParts nameSee page
Power window does not operate.
(Door lock does not operate.)1. POWER M-Fuse (R/B No.7)
2. Wire Harness-
-
Power window does not operate.
(Door lock is normal.)
1. GAUGE Fuse (I/P J/B)
2. Ignition Switch
3. POWER M-Fuse (R/B No.7)
4. Power Main Relay (R/B No.7)
5. Power Window Master Switch
6. Wire Harness-
BE-1 1
-
BE-49
BE-49
-
ºOne Touch Power Window Systemº does not operate.1. Power Window Master SwitchBE-49
Only one window glass does not move.
1. Power Window Master Switch
2. Power Window Switch
3. Power Window Motor
4. Wire HarnessBE-49
BE-49
BE-49
-
ºWindow Lock Systemº does not operate.1. Power Window Master SwitchBE-49
ºWindow Lock Illuminationº does not light up.1. Power Window Master SwitchBE-49
Page 1013 of 1202
N12792
N12793
Junction Block Side BE-12
- BODY ELECTRICALIGNITION SWITCH AND KEY UNLOCK WARNING
SWITCH
1996 TERCEL (RM440U)
(f) Connect the negative (-) lead from the battery to terminal
8.
(g) Disconnect the negative (-) lead from the battery to termi-
nal 4.
(h) Check that the chime stops sounding.
If operation is not as specified, replace the relay.
4. INSPECT INTEGRATION RELAY CIRCUIT
Remove the relay from the instrument panel junction block and
inspect the connectors on the junction block side.
Tester connectionConditionSpecified condition
4 - GroundKey unlock warning switch OFFNo continuity
4 - GroundKey unlock warning switch ONContinuity
5 - GroundBuckle switch OFF
(Seat belt unfastened)No continuity
5 - GroundBuckle switch ON
(Seat belt fastened)Continuity
7 - GroundConstantContinuity
8 - GroundDriver's door courtesy switch OFFNo continuity
8 - GroundDriver's door courtesy switch ONContinuity
11 - GroundLight control switch OFFNo continuity
11 - GroundLight control switch TAIL or HEADContinuity
2 - GroundIgnition switch LOCK or ACCNo voltage
2 - GroundIgnition switch ONBattery positive voltage
3 - GroundConstantBattery positive voltage
9 - GroundIgnition switch LOCK or ACCNo voltage
9 - GroundIgnition switch ONBattery positive voltage
12 - GroundConstantBattery positive voltage
If the circuit is as specified, try replacing the relay with a new
one.
If the circuit is not as specified, inspect the circuits connected
to other parts.
Page 1014 of 1202
BE0QU-01
I05914
D.R.L. : Daytime Running Light
* : CANADA Models OnlyEngine Room R/B
Headlight Control Relay
HEAD LH Fuse
HEAD RH Fuse
DOME Fuse
DIM M-Fuse
DRL Fuse
R/B No.5
D.R.L No.4 Relay
Headlight Dimmer Relay
HEAD LH-UPR Fuse
HEAD RH-UPR Fuse
HEAD LH-LWR Fuse
HEAD RH-LWR Fuse *
*
Combination Switch
Lignt Control Switch
Headlight Dimmer Switch*
* D.R.L. Main Relay
Door Courtesy Switch
Taillights I/P J/B
Integration Relay
Taillight Control Relay
TAIL Fuse
ECU-IG FuseHeadlights
- BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
BE-13
1035 Author: Date:
1996 TERCEL (RM440U)
HEADLIGHT AND TAILLIGHT SYSTEM
LOCATION
Page 1015 of 1202
BE0QV-03
N12366
Light Control SwitchSwitch BodyWiper and Washer Switch
Spiral Cable BE-14
- BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
1996 TERCEL (RM440U)
COMPONENTS
Page 1016 of 1202
BE0QW-03
N12796
- BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
BE-15
1996 TERCEL (RM440U)
REMOVAL
1. REMOVE UPPER AND LOWER COLUMN COVERS
(See page SR-13)
2. REMOVE LIGHT CONTROL SWITCH
(a) Disconnect the connector.
(b) Remove the 2 screws and the switch .
3. REMOVE WIPER AND WASHER SWITCH
(a) Disconnect the connector.
(b) Remove the 2 screws and the switch .