pairing phone TOYOTA TUNDRA 2008 2.G Owners Manual

357
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
Set Passkey
The passkey can be c hanged. A 4 to 8
digit code can be input as a pa sskey.
Delete
The registered phones can be deleted.
To enter the phone setup menu 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Setup” is displayed and push the
knob.
“Setup. Please push the talk switch and
say security, or phone setup.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Phone Setup” is displayed and push
the knob.
“Phone setup. Push the talk switch and
say pair phone, select phone, change
name, list phones, set pa sskey or delete.”
is heard.
“XXX (phone name) already selected.” is
heard and “XXX (phone name)” is dis-
played.
If no phone has been registered, the sys-
tem may not function properly. To pair phones
1. Push the talk switch and say “Pair phone”, or turn the “AUDIO/CONTROL”
knob until “Pair Phone” is displayed
and push the knob.
“Pair. Push the talk switch and say a
name for the phone.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (desired phone
name)”.
“Push the talk switch and say confirm.
Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“XXX Ready for phone pairing. Please use
the phone to connect it to the hands −free
system. The passkey for the p hone is....”
is heard.
After “HANDS FREE” is displayed, a pass-
key
∗ is displayed and “Searching.” is
heard.
4. Input the passkey displayed on the screen into the phone. “The phone is paired and ready for use.
Returning to the main menu.” is heard and
“Paired” is displayed.
The system may not function in the follow-
ing cases:
If 6 phones have already been regis-
tered.
If the vehicle is moving.
If the system cannot communicate with
the phone.
∗: Passkey is a password r
equired to reg-
ister a phone to the system.
INFORMATION
 To use the handsfree system, you
need to register your phone in the
system. Once you have registered
it, you can make a handsfree call.
Up to 6 phones can be registered.
 For the operation of the phone, see
the manual that comes with your
cellular phone.
 The passkey can be changed. See
page 360 for changing the passkey.

360
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
Select phone
Push the talk switch and say “Select
phone”, or turn the “AUDIO/CONTROL”
knob until “Select Phone” is displayed and
push the knob.
For further details on selecting a phone,
see page 358.
Change name
Push the talk switch and say “Change
name”, or turn the “AUDIO/CONTROL”
knob until “Change Name” is displayed
and push the knob.
For further details on changing a name,
see page 358.
Delete
Push the talk switch and say “Delete”, or
turn the “AUDIO/CONTROL” knob until
“Delete” is displayed and push the knob.
For further details on deleting a phone,
see page 361.
If no phone has been registered, the sys-
tem may not function properly. To set a passkey
1. Push the talk switch and say “Set passkey”, or turn the
“AUDIO/CONTROL” knob until “Set
Passkey” is displayed and push the
knob.
“Set Passkey. The passkey is r equired for
the phone pairing process. Push the talk
switch and say a new passkey.” is heard
and passkey is displayed.
2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob to
select a number.
When using a voice command:
“XXXX (new pa sskey) Push the talk switch
and say confirm. Otherwise, continue
adding numbers, or say go back or
delete.” is heard and “XXXX (new
passkey)” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the knob.
“Passkey ch anged. Returning to the phone
setup.” is heard. When using the knob:
1. Turn the “AUDIO/CONTROL” knob to select a number. Push the
“AUDIO/CONTROL” knob to set.
2. When the passkey is set, push the “AUDIO/CONTROL” knob.
“Passkey c hanged. Returning to the phone
setup.” is heard.
The system may not function in the follow-
ing cases:
If the passkey has less than 4 digits.
If the passkey has more than 8 digits.