warning TOYOTA TUNDRA 2018 Owners Manual (in English)

3
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
1 If equipped.2 For vehicles with a navigation system, refer to the “Navigation Syste\
m Owner’s
Manual” and “2018 Entune™ Audio Quick Reference Guide.”
NOTE: Instrument panel features depend on the seat option, split seats o\
r bench.
Automatic transmission shift lever1
Windshield wiper and washer controls
Two and four-wheel drive selector
1
Display audio system2
Emergency flasher switch
Air conditioning controls
1
Tire Pressure Monitoring (warning)
System (TPMS) reset switch
Intuitive parking assist button1
Trailer brake controller1
12V DC power outlets
Automatic shift lever
1
TOW/HAUL switch1
VSC OFF switch
Ignition
switch AUX port/USB port
1

4
OVERVIEWInstrument cluster
For details, refer to “Indicators and warning lights,” Section 2-2\
, 2018 Owner’s
Manual.
Multi-Information Display/
Trip information display Speedometer
Outside temperature display
Fuel gaugeODO/TRIP display switch
Shift position and range display
Instrument panel light control button Oil pressure gauge
Engine coolant temperature gauge Voltmeter
Tachometer
Air bag SRS warning1
Anti-lock Brake System warning1
AIR BAG ON and
AIR BAG OFF indicators1
AUTO Limited Slip Differential indicator1
Blind Spot Monitor outside
rearview mirror indicators3
Indicator symbols
Automatic High Beam (AHB)
indicator
Blind Spot Monitor (BSM)
indicator3
Arrow direction indicates fuel
tank door position
Service indicators and reminders

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
5
Charging system warning1
Brake system warning1
Malfunction/Check Engine indicator1
Low fuel level warning
Master warning1
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Trailer connection indicator
3
Headlight low/high beam indicatorTurn signal indicator
Vehicle Stability Control
OFF indicator1
TOW/HAUL mode indicator1
Low Tire Pressure Warning1
Theft deterrent/Engine
immobilizer system indicator
1 If indicator does not turn off within a few seconds of starting engine, \
there may be a malfunction.
Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 20\
18 Owner’s Manual.3 If equipped.
Radar Cruise Control indicator
Fog light indicator
Brake Override System/
Drive-Start Control warningRear Cross Traffic Alert
(RCTA)3
High engine coolant
temperature warning
TRAC OFF indicator1
Lane Departure Alert (LDA)
indicator
Pre-Collision System (PCS)
indicator
Low windshield washer fluid
warning
Slip indicator1
Low outside temperature
indicator
Parking brake indicator1
Cruise control indicator2/Cruise
control SET indicator
High/Low speed four-wheel
drive indicator3

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
19
USB/AUX PORT
USB port
By connecting a USB-compatible portable audio device or USB memory to th\
e
USB port, you can listen to music from the portable audio device or USB \
memory
through the vehicle’s speaker system.
AUX port
By inserting a mini plug into the AUX port, you can listen to music from\
a portable
audio device through the vehicle’s speaker system while in AUX mode.
Multi-Information Display (MID)
Refer to your Owner’s Manual for complete details. Push “DISP” to scroll through the following:
Trip information
/BWJHBUJPOTZTUFNMJOLFEEJTQMBZJODMVEJOHDPNQBTTEJTQMBZ JGFRVJQQFE

Vehicle information Audio system-linked display
Warning message display
Settings display
“” and “” Press to select an item/change
pagesEnter/Set:
Press to enter/set,
press and hold to
reset
Return to
previous screen
Switch menus/Display top screen

29
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt
to test the operation of the pre-collision system yourself, as the syste\
m may not
operate or engage, possibly leading to an accident. In some situations, \
such as
when driving in inclement weather such as heavy rain, fog, snow or a san\
dstorm or
while driving on a curve and for a few seconds after driving on a curve,\
a vehicle
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/\
PD operation,
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\
nformation
%JTQMBZ .*%
UPVSHFUIFESJWFSUPUBLFFWBTJWFBDUJPO
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional
braking force using Brake Assist. This system may prime the brakes and m\
ay apply
greater braking force in relation to how strongly the brake pedal is dep\
ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the
possibility of a frontal collision with a preceding vehicle is extremely\
high, the
system may automatically apply the brakes, reducing speed in order to he\
lp the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)

34
TOYOTA SAFETY SENSE™
7&)*$-&48":8"3/*/(4:45&. 484
'6/$5*0/
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
DISABLING SWS
ADJUSTING SWAY ALERT SENSITIVITY

1SFTTi” switches and select GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%


1SFTTi
” switches and select the setting function and then press “.”

1SFTTi
” to go back to the menu. Also, use “” to switch menus or display
top screen.

1SFTTi4&561wPSi"114wTXJUDIFTPOUIFNVMUJNFEJBTZTUFN 
If you have Entune AudIo Plus, select “Setup” on the “Apps” \
screen.

4FMFDUi7FIJDMFwPOUIFi4FUVQwTDSFFO

4FMFDUi7FIJDMF$VTUPNJ[BUJPOwPOUIFi7FIJDMF4FUUJOHTwTDSFFO

$IPPTFBDBUFHPSZUPEJTQMBZUIFTFUUJOHT

4FMFDUUIFTFUUJOHUPCFDIBOHFE

4FMFDUiwPSiwUPDIPPTFUIFEFTJSFEMFWFM
UIFOTFMFDUi0,w
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.

36
TOYOTA SAFETY SENSE™
ADJUSTING DISTANCE
To change the vehicle-to-
vehicle distance

Push the “
” button
to cycle through the
settings, which will change
progressively.
This mode employs a radar sensor to detect the presence of a preceding v\
ehicle
VQUPBQQSPYJNBUFMZGU N
BIFBE
EFUFSNJOFTUIFDVSSFOUWFIJDMFUPWFIJDMF
following distance and operates to maintain a suitable following distanc\
e from the
vehicle ahead. These distances vary based on vehicle speed.
(1) (2) (3)

 Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-\
to-
vehicle distance can also be set by operating the vehicle-to-vehicle dis\
tance
control.

 Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automaticall\
y
decelerates your vehicle. When a greater reduction in vehicle speed is
OFDFTTBSZ
UIFTZTUFNBQQMJFTUIFCSBLFT UIFTUPQMJHIUTXJMMDPNFPOBUUIJT
UJNF
5IFTZTUFNXJMMSFTQPOEUPDIBOHFTJOUIFTQFFEPGUIFWFIJDMFBIFBE
in order to maintain the vehicle-to-vehicle distance set by the driver. \
A warning
tone warns you when the system cannot decelerate sufficiently to prevent\
your
vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long d\
ownhill
slopes.
Preceding
vehicle mark LONG
(default setting) MIDDLE

SHORT

39
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Seat belts
SAFETY & EMERGENCY FEATURES
baT
Keep as low on
hips as possible
Take up slack
Too high
System reset initialization
1. Push and hold “
SET” button until
the indicator blinks three times.
2. Wait several minutes to allow initialization to complete.
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn the
ignition switch to “ON” and press and hold the “
SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initializati\
on to complete.
Refer to the load label on the door jamb or the Owner’s Manual for ti\
re inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then\
remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not\
been
initialized recently, setting the tire pressures to factory specificatio\
ns should
turn off the light.
Push up, or squeeze
lock release to lowerDownUp
127(,IDSDVVHQJHU