warning light TOYOTA TUNDRA 2018 Owners Manual (in English)

4
OVERVIEWInstrument cluster
For details, refer to “Indicators and warning lights,” Section 2-2\
, 2018 Owner’s
Manual.
Multi-Information Display/
Trip information display Speedometer
Outside temperature display
Fuel gaugeODO/TRIP display switch
Shift position and range display
Instrument panel light control button Oil pressure gauge
Engine coolant temperature gauge Voltmeter
Tachometer
Air bag SRS warning1
Anti-lock Brake System warning1
AIR BAG ON and
AIR BAG OFF indicators1
AUTO Limited Slip Differential indicator1
Blind Spot Monitor outside
rearview mirror indicators3
Indicator symbols
Automatic High Beam (AHB)
indicator
Blind Spot Monitor (BSM)
indicator3
Arrow direction indicates fuel
tank door position
Service indicators and reminders

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
5
Charging system warning1
Brake system warning1
Malfunction/Check Engine indicator1
Low fuel level warning
Master warning1
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Trailer connection indicator
3
Headlight low/high beam indicatorTurn signal indicator
Vehicle Stability Control
OFF indicator1
TOW/HAUL mode indicator1
Low Tire Pressure Warning1
Theft deterrent/Engine
immobilizer system indicator
1 If indicator does not turn off within a few seconds of starting engine, \
there may be a malfunction.
Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 20\
18 Owner’s Manual.3 If equipped.
Radar Cruise Control indicator
Fog light indicator
Brake Override System/
Drive-Start Control warningRear Cross Traffic Alert
(RCTA)3
High engine coolant
temperature warning
TRAC OFF indicator1
Lane Departure Alert (LDA)
indicator
Pre-Collision System (PCS)
indicator
Low windshield washer fluid
warning
Slip indicator1
Low outside temperature
indicator
Parking brake indicator1
Cruise control indicator2/Cruise
control SET indicator
High/Low speed four-wheel
drive indicator3

39
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Seat belts
SAFETY & EMERGENCY FEATURES
baT
Keep as low on
hips as possible
Take up slack
Too high
System reset initialization
1. Push and hold “
SET” button until
the indicator blinks three times.
2. Wait several minutes to allow initialization to complete.
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn the
ignition switch to “ON” and press and hold the “
SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initializati\
on to complete.
Refer to the load label on the door jamb or the Owner’s Manual for ti\
re inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then\
remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not\
been
initialized recently, setting the tire pressures to factory specificatio\
ns should
turn off the light.
Push up, or squeeze
lock release to lowerDownUp
127(,IDSDVVHQJHU