ignition TOYOTA TUNDRA 2021 Owners Manual (in English)

2
Instrument panel
1 If equipped.2 For details, refer to the “Navigation and Multimedia System Owner’\
s Manual” or visit www.toyota.com/audio-multimedia for additional resources.
NOTE: Instrument panel features depend on the seat option, split seats o\
r bench.
Refer to the Owner’s Manual for more details.
OVERVIEW
Power tilt and telescopic steering
control switch1
Automatic High Beams (AHB) switch
Tire Pressure Monitoring (warning)
System (TPMS) reset switch
Power rear view mirror controls1
Personal/Interior lights main switch Headlight leveling dial
Ignition
switch
1
“POWER”
button1
Power back window switch1
Cargo lamp main switchTilt and telescopic steering lock release lever
1
(below the steering wheel)Hood lock release lever
Parking brake
Headlight/turn signal/
front fog light
1
control
Steering wheel controls
Audio control switches2
Telephone controls2
Voice command switch2Meter control switches
Dynamic Radar
Cruise Control (DRCC)
vehicle-to-vehicle
distance switch
Lane Departure Alert (LDA)
switch Dynamic Radar Cruise
Control (DRCC) switch
Multi-Information Display (MID) Meters
MY21_Tundra_QRG_V2_ML_0709.indd 27/13/20 10:54 AM

3
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
1 If equipped.2 For details, refer to the “Navigation and Multimedia System Owner’s M\
anual” or visit
www.toyota.com/audio-multimedia for additional resources.
NOTE: Instrument panel features depend on the seat option, split seats or ben\
ch.
Refer to the Owner’s Manual for more details.
Automatic transmission shift lever1
Power tilt and telescopic steering
control switch1
Windshield wiper and washer control
Two and four-wheel drive selector
1
Audio/Navigation system2
USB port2
USB charging portsVSC OFF switch Intuitive parking assist switch
1
Power outlte-12V DC
Emergency flasher switch
Air conditioning/heating controls
1
Tire Pressure Monitoring (warning)
System (TPMS) reset switch Trailer brake controller
1
Automatic shift lever1
TOW/HAUL switch1Ignition
switch1
“POWER”
button1
Tilt and telescopic steering lock release lever1
(below the steering wheel)Meter control switches
Dynamic Radar
Cruise Control (DRCC)
vehicle-to-vehicle
distance switch
Lane Departure Alert (LDA)
switch Dynamic Radar Cruise
Control (DRCC) switch
Multi-Information Display (MID)
MY21_Tundra_QRG_V2_ML_0709.indd 37/13/20 10:54 AM

10
FEATURES & OPERATIONS
Shift the shift lever to “S” position from “D” position.Floor shift type:

+ : Upshift (push and release)

- : Downshift (pull and release)
Column shift type:

+ : Upshift (push and release)

- : Downshift (push and release)
Downshifting increases power going uphill, or provides engine braking do\
wnhill. For
best fuel economy during normal driving conditions, always drive with th\
e shift lever
in the “D” position.
* The vehicle must be on and the brake pedal depressed to shift from Par\
k.
Park*
Reverse
Neutral
Drive
N
“S” mode
Park*
Reverse
Neutral
Drive
“S” mode
N
+ (“S” mode)
- (“S” mode)
+ (“S” mode)
- (“S” mode)
FLOOR SHIFT TYPE
COLUMN SHIFT TYPE
“S” (SEQUENTIAL) MODE
Automatic transmission
Hold wheel, push lever down, set angle and length, and return lever.
Bench seat
Driver side
Lock release lever
Push the control switch, set angle and length.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Auto tilt away (power-adjustable type) When ignition key removed, the steering
wheel moves up and away from driver and stows, but returns to its positi\
on when
key is inserted.
Power easy access system (if equipped): The steering wheel and driver’s seat
move in accordance with power switch mode and the driver’s seat belt \
condition.
MANUAL (IF EQUIPPED)
POWER (IF EQUIPPED)
MY21_Tundra_QRG_V2_ML_0709.indd 107/13/20 10:54 AM

11
Shift the shift lever to “S” position from “D” position.Floor shift type:

+ : Upshift (push and release)

- : Downshift (pull and release)
Column shift type:

+ : Upshift (push and release)

- : Downshift (push and release)
Downshifting increases power going uphill, or provides engine braking do\
wnhill. For
best fuel economy during normal driving conditions, always drive with th\
e shift lever
in the “D” position.
* The vehicle must be on and the brake pedal depressed to shift from Par\
k.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Tilt & telescopic steering wheel
Door locks
LockLockUnlock
Unlock
Hold wheel, push lever down, set angle and length, and return lever. Bench seat
Driver side Split seat
Front passenger side
Length
Lock release lever
Lock release lever Angle
Push the control switch, set angle and length.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Auto tilt away (power-adjustable type) When ignition key removed, the steering
wheel moves up and away from driver and stows, but returns to its positi\
on when
key is inserted.
Power easy access system (if equipped): The steering wheel and driver’s seat
move in accordance with power switch mode and the driver’s seat belt \
condition.
Angle
Control switchLength
Up
Toward the
driver
Away from
the driver
Down
Angle
MANUAL (IF EQUIPPED)
POWER (IF EQUIPPED)
MY21_Tundra_QRG_V2_ML_0709.indd 117/13/20 10:54 AM

20
FEATURES & OPERATIONSAudio
Touchscreen display
Turn to tune
radio stations
manually or
select tracks or
files
Push to turn
ON/OFF, turn to
adjust volume
Seek station/
track/file select
Access to
Bluetooth
hands-free system
Access to
Apps screen
Refer to the “Navigation and Multimedia System Owner’s Manual” or vi\
sit
www.toyota.com/audio-multimedia for additional resources.
NOTE: Always use safe driving practices and follow all traffic rules.
Access to
HOME screen.
Access to
MENU screen.
Access to
AUDIO screen.
Access to
MAP screen.
Connecting a compatible device and cable into the USB media port will support
charging and music playback through the audio multimedia system.
Refer to your Owner’s Manual for complete details.Press meter control switches to change and select information in the followin\
g:
USB charge ports
(Charge only)
The vehicle must be in the “ACC” or “ON” position (without Sma\
rt Key) /
“ACCESSORY” or ”IGNITION ON” mode (with Smart Key) for use.
MY21_Tundra_QRG_V2_ML_0709.indd 207/13/20 10:54 AM

21
Turn to tune
radio stations
manually or
select tracks or
filesSeek station/
track/file select
Access to
Bluetooth
hands-free system
Access to
Apps screen
Refer to the “Navigation and Multimedia System Owner’s Manual” \
or visit
www.toyota.com/audio-multimedia for additional resources.
NOTE: Always use safe driving practices and follow all traffic rules.
Connecting a compatible device and cable into the USB media port will su\
pport
charging and music playback through the audio multimedia system.
Multi-Information Display (MID)
Refer to your Owner’s Manual for complete details.Press meter control switches to change and select information in the fol\
lowing:
Drive information
Navigation system-linked display including compass display (if equipped\
)
Vehicle information Audio system-linked display
Warning message display
Settings display
“” and “” Press to select an item/change
pages
USB media port
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Enter/Set:
Press to enter/set,
press and hold to
reset
Return to
previous screen
Switch menus/Display top screen
The vehicle must be in the “ACC” or “ON” position (without \
Smart Key) /
“ACCESSORY” or ”IGNITION ON” mode (with Smart Key) for use\
.
MY21_Tundra_QRG_V2_ML_0709.indd 217/13/20 10:54 AM

22
FEATURES & OPERATIONSPower outlets-12V DC
Bluetooth® technology allows dialing or receipt of calls without removing your
hands from the steering wheel.
Refer to the Bluetooth
® device pairing in this guide or the Navigation and
Multimedia System Owner’s Manual for additional user instructions.
NOTE: Always use safe driving practices and follow all traffic rules.
Inside of the console box (Type D)
Instrument panel (Type A)Back of the front center seatback (Type B)
Back of the front center seatback (Type C)
Back of the console box (Type E)Back of the console box (Type F)
“MODE/HOLD”
Push to change audio mode. Push and
hold to mute or pause the audio.
“”Use to search within the selected
audio feature.
The vehicle must be in the “ACC” or “ON” position (without \
Smart Key) /
“ACCESSORY” or ”IGNITION ON” mode (with Smart Key) for use\
.
MY21_Tundra_QRG_V2_ML_0709.indd 227/13/20 10:54 AM

23
Power outlets-12V DC
Bluetooth® technology allows dialing or receipt of calls without removing your
hands from the steering wheel.
Refer to the Bluetooth
® device pairing in this guide or the Navigation and
Multimedia System Owner’s Manual for additional user instructions.
NOTE: Always use safe driving practices and follow all traffic rules.
Back of the front center seatback (Type B)
Steering wheel switches
& telephone controls (Bluetooth®)
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
“MODE/HOLD”
Push to change audio mode. Push and
hold to mute or pause the audio.
“”Use to search within the selected
audio feature.
Microphone location may vary by vehicle.
• Make a call
• Receive a call
• Display “Phone” screen
• End a call
• Refuse a call
“-, +” Volume control
Voice command switch
The vehicle must be in the “ACC” or “ON” position (without \
Smart Key) /
“ACCESSORY” or ”IGNITION ON” mode (with Smart Key) for use\
.
MY21_Tundra_QRG_V2_ML_0709.indd 237/13/20 10:54 AM

34
TOYOTA SAFETY SENSE™
ADJUSTING LDA ALERT SENSITIVITY
The driver can adjust the sensitivity of the LDA (warning) function fr\
om the
Multi-Information Display (MID) customization screen.High - Is designed to warn approximately before the front tire crosses the lane marker.
Normal - Is designed to warn approximately when the front tire crosses the lane marker.
LANE DEPARTURE ALERT (CONTINUED)
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
LANE DEPARTURE ALERT
LDA function display
Lane markers
(1)
Lane Departure Alert (LDA) indicator flashes orange when operating.
The LDA function displays when the Multi-Information Display (MID) is \
switched to
the driving assist system information screen.
(1) The system displays solid white lines on the LDA indicator when vi\
sible lane markers on the road are detected. A side flashes orange to alert the dri\
ver
when the vehicle deviates from its lane.
(2) The system displays outlines on the LDA indicator when lane marker\
s on the road are not detected or the function is temporarily canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
(1) Press “ ” switches and select “” from the Multi-Information Display (MID).
(2) Press “ ” switches and select “LDA” and then press “
.” The setting screen
is displayed.
(3) Press “ ” switches and select “LDA sensitivity” and then press “
” to select
the desired setting.
(4) Press “
” to go back to the menu. Also, use “ ” to switch menus or display
top screen.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Lane Departure Alert (LDA)
By detecting visible white/yellow lane markings at speeds above 32 mph, \
Lane
Departure Alert (LDA) is designed to issue an audio/visual alert if an\
inadvertent
lane departure is detected.
* See Toyota.com/safety-sense for model applicability.
Refer to the Toyota Owner’s Manual for a list of additional situation\
s in which the
system operation may be limited.
MY21_Tundra_QRG_V2_ML_0709.indd 347/13/20 10:54 AM

35
ADJUSTING LDA ALERT SENSITIVITY
The driver can adjust the sensitivity of the LDA (warning) function fr\
om the
Multi-Information Display (MID) customization screen.High - Is designed to warn approximately before the front tire crosses the lane marker.
Normal - Is designed to warn approximately when the front tire crosses the lane marker.
LANE DEPARTURE ALERT (CONTINUED)
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
(2)
(1)
Lane Departure Alert (LDA) indicator flashes orange when operating.
The LDA function displays when the Multi-Information Display (MID) is \
switched to
the driving assist system information screen.
(1) The system displays solid white lines on the LDA indicator when vi\
sible lane
markers on the road are detected. A side flashes orange to alert the dri\
ver
when the vehicle deviates from its lane.
(2) The system displays outlines on the LDA indicator when lane marker\
s on the road are not detected or the function is temporarily canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
(1) Press “” switches and select “” from the Multi-Information Display (MID).
(2) Press “
” switches and select “LDA” and then press “.” The setting screen
is displayed.
(3) Press “
” switches and select “LDA sensitivity” and then press “” to select
the desired setting.
(4) Press “
” to go back to the menu. Also, use “” to switch menus or display
top screen.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Lane Departure Alert (LDA)
By detecting visible white/yellow lane markings at speeds above 32 mph, \
Lane
Departure Alert (LDA) is designed to issue an audio/visual alert if an\
inadvertent
lane departure is detected.
* See Toyota.com/safety-sense for model applicability.
Refer to the Toyota Owner’s Manual for a list of additional situation\
s in which the
system operation may be limited.
MY21_Tundra_QRG_V2_ML_0709.indd 357/13/20 10:54 AM